AS 3

beaked99·air-scales·hardware/AS 3/AS 3.kicad_pcb

AS 3 PCB layout, top view — open source ESP32 board by beaked99

About the AS 3 PCB

AS 3 is an open source ESP32 PCB design by beaked99, published on GitHub. It is a 4-layer board measuring 71 × 75 mm, with 81 components from 40 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the LM74610QDGKTQ1, LMR604205SRAKRQ1, TPS62901RPJR, BME280 and TPS2121RUXR. By type, the board carries 32 capacitors, 23 resistors, 13 diodes, 6 ICs, 2 connectors and 2 switches.

From the project

2025-11-20. Updated all the footprints and symbols to their proper layouts. no more fkn errors. Hallefuckinglujah. Fucked up with LM74610 not using the right footprint. minor fix. 2025-11-16. lots of changes to the schematic. i think its a lot more understandable now for you Seth

2025-11-20. Updated all the footprints and symbols to their proper layouts. no more fkn errors. Hallefuckinglujah. Fucked up with LM74610 not using the right footprint. minor fix. 2025-11-16. lots of changes to the schematic. i think its a lot more understandable now for you Seth. I am not sure if VBus needs a TVS or not??? Maybe it does, although I noticed unexpected maker doesnt use it. Maybe i'll put it in. Otherwise I think this schematic is a wrap, and all thats left is to build out the board. Let me know what you think!!!

Main components on the AS 3

AS 3 bill of materials (BOM)

81 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1
Espressif Systems
U1
1
LM74610QDGKTQ1
TI
U2
1
LMR604205SRAKRQ1
TI
U3
1
TPS62901RPJR
U4
1
BME280
U5
1
TPS2121RUXR
U6
1
IAUC120N06S5L011
Infineon Technologies
Q1
1
CONN_02X03_ODD_EVEN
Conn_02x03_Odd_Even
Molex
J1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J3
2
SW_Push
SW1, SW2
5
C2297
LED_Small
D1, D4, D5, D6, D7
3
C207270
D_TVS_Small
Littelfuse
D2, D8, D11
1
SMBJ28A
hongjiacheng
D2_1
1
SMBJ14A
GOODWORK
D2_2
2
C126839
D_TVS_Small
Littelfuse
D3, D10
1
WS2812B
XINGLIGHT
D9
1
10UH
10uH
Chilisin
L1
1
2.2UH
2.2uH
Coilcraft
L2
12
100NF
100nF
YAGEO
C1, C5, C12, C14, C15, C16, C21, C23 +4
1
1UF
1uF
Samsung Electro-Mechanics
C2
Show 20 more
QtyPartRefs
6
10UF
10uF
C3, C4, C19, C24, C25, C27
1
2.2UF
2.2uF
Samsung Electro-Mechanics
C6
5
22UF
22uF
Samsung Electro-Mechanics
C7, C8, C18, C30, C31
2
10UF
10uF
Samsung
C9, C11
2
22UF
22uF
C10, C22
1
47UF
47uF
Lelon
C13
1
22NF
22nF
C17
1
10NF
10nF
C20
3
100K
R1, R15, R18
5
1K
R2, R6, R11, R17, R21
2
5.1K
R3, R4
2
4.7K
R5, R13
3
10K
R7, R12, R22
1
1K
R8
1
2K
R9
1
82K
R10
1
82K
R14
2
15K
R16, R23
1
47K
R19
1
220
R20

AS 3 design files

The KiCad project lives in the beaked99/air-scales repository on GitHub; these links point at the commit this page was built from.

AS 3: common questions

What microcontroller does the AS 3 use?

The AS 3 is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the AS 3 PCB?

The AS 3 measures 71 × 75 mm, has 4 copper layers and is 1.596 mm thick.

How many components are on the AS 3?

81 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the AS 3 design files?

From the beaked99/air-scales repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the AS 3 design in my own project?

The repository has no license, so all rights stay with beaked99. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the AS 3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in air-scales

Similar boards