9 open source boards using the LM74610QDGKTQ1
Real designs built with the LM74610QDGKTQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
AS 4
beaked99
90.5 × 67 mm126 parts4LNo license0Microchip SAM
PrecisionTimer RevG-1
SepticElectronics
84.3 × 50.8 mm99 parts4LGPL-3.00- schematic only · 6 parts
OR-ing
whoelse091
6 partsMIT0 Microchip SAM
PrecisionTimer RevG
SepticElectronics
84.3 × 50.8 mm98 parts4LGPL-3.00ESP32
AS 3
beaked99
71 × 75 mm81 parts4LNo license0Microchip SAM
PrecisionTimer RevF
SepticElectronics
84.3 × 50.8 mm91 parts4LGPL-3.00ESP32
Air scales
beaked99
45 × 95 mm80 parts4LNo license0Microchip SAM
PrecisionTimer RevF back
SepticElectronics
84.3 × 50.8 mm88 parts4LGPL-3.00Microchip SAM
PrecisionTimer RevF back2
SepticElectronics
84.3 × 50.8 mm88 parts4LGPL-3.00
The LM74610QDGKTQ1 in open source designs
The gallery holds 9 open source boards using the LM74610QDGKTQ1 from 3 GitHub repositories; a typical one measures about 84.3 × 50.8 mm and carries around 88 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is AS 4 by beaked99.
Microcontrollers on boards using the LM74610QDGKTQ1
What boards using the LM74610QDGKTQ1 are built for
LM74610QDGKTQ1: common questions
Where can I find a LM74610QDGKTQ1 reference design?
Each of the 9 boards on this page is a real design using the LM74610QDGKTQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LM74610QDGKTQ1 use?
Most are built on Microchip SAM (5) and ESP32 (3).
How big is a typical board using the LM74610QDGKTQ1?
The median is 84.3 × 50.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the LM74610QDGKTQ1?
By GitHub stars, AS 4 by beaked99, with 0 stars.
Can I simulate one of these boards using the LM74610QDGKTQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.