Air scales
beaked99·air-scales·hardware/air-scales/air-scales.kicad_pcb
About the Air scales PCB
Air scales is an open source ESP32 PCB design by beaked99, published on GitHub. It is a 4-layer board measuring 45 × 95 mm, with 80 components from 49 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the BME280, TPS62162DSG, SMA6T28AY, SMA6T15AY and LM74610QDGKTQ1. By type, the board carries 30 capacitors, 21 resistors, 11 diodes, 9 ICs, 4 connectors and 2 switches.
From the project
2025-11-20. Updated all the footprints and symbols to their proper layouts. no more fkn errors. Hallefuckinglujah. Fucked up with LM74610 not using the right footprint. minor fix. 2025-11-16. lots of changes to the schematic. i think its a lot more understandable now for you Seth
2025-11-20. Updated all the footprints and symbols to their proper layouts. no more fkn errors. Hallefuckinglujah. Fucked up with LM74610 not using the right footprint. minor fix. 2025-11-16. lots of changes to the schematic. i think its a lot more understandable now for you Seth. I am not sure if VBus needs a TVS or not??? Maybe it does, although I noticed unexpected maker doesnt use it. Maybe i'll put it in. Otherwise I think this schematic is a wrap, and all thats left is to build out the board. Let me know what you think!!!
Main components on the Air scales
Air scales bill of materials (BOM)
80 components, 49 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U1 |
| 1 | TPS62162DSG | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U2 |
| 1 | SMA6T28AY | SMA_UNI_STM | U3 |
| 1 | SMA6T15AY | SMA_UNI_STM | U4 |
| 1 | LM74610QDGKTQ1 | SOP65P490X110-8N | U5 |
| 1 | LM63625DQPWPRQ1 | PWP0016K_N | U6 |
| 1 | TPS2553DRVR | SON65P200X200X80-7N | U7 |
| 1 | TPS2121RUXR | IC_TPS2121RUXR | U8 |
| 1 | ESP32-S3-WROOM-1U-N16R8 | XCVR_ESP32-S3-WROOM-1U-N16R8 | U9 |
| 1 | C458246 | LFPAK56 | Q1 |
| 1 | Connector, USB-TYPE-C-16P | TYPE-C-SMD_HX-TYPE-C-16PIN | J1 |
| 2 | Conn_02x02_Odd_Even | Molex_Micro-Fit_3.0_43045-0418_2x02-1MP_P3.00mm_Vertical | J3, J4 |
| 1 | Conn_02x01 | Molex_Micro-Fit_3.0_43045-0218_2x01-1MP_P3.00mm_Vertical | J6 |
| 2 | B3FS-1000 | SW_B3FS-1000_OMR | SW1, SW2 |
| 2 | ESD321DYAR hongjiacheng | D_SOD-523 | D1, D2 |
| 2 | ESD441DPLR hongjiacheng | D_SOD-123FL | D3, D10 |
| 1 | ESD5Z5.0 | D_SOD-523 | D4 |
| 1 | RED Hubei KENTO Elec | D_0603 | D5 |
| 1 | GREEN Hubei KENTO Elec | D_0603 | D7 |
| 2 | ORANGE Hubei KENTO Elec | D_0603 | D8, D12 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | WS2812B | LED-SMD_4P-L1.6-W1.5_XL-1615RGBC-WS2812B | D9 |
| 1 | BLUE Hubei KENTO Elec | D_0603 | D11 |
| 1 | 2.2uH,3.15A FH(Guangdong Fenghua Advanced Tech) | L_0805 | L1 |
| 1 | 2.2uH,50mA FH(Guangdong Fenghua Advanced Tech) | L_0805 | L2 |
| 1 | 10uF Samsung Electro-Mechanics | C_0603 | C1 |
| 1 | 100pF FH(Guangdong Fenghua Advanced Tech) | C_0402 | C2 |
| 1 | 22uF Samsung Electro-Mechanics | C_0603 | C3 |
| 1 | 2.2uF Samsung Electro-Mechanics | C_1206 | C4 |
| 1 | 47uF | CAP_PC_10X12P7_NCH | C5 |
| 5 | 10uF Samsung Electro-Mechanics | C_1206 | C6, C18, C24, C25, C26 |
| 1 | 220nF Samsung Electro-Mechanics | C_0603 | C7 |
| 1 | 1uF Samsung Electro-Mechanics | C_1206 | C8 |
| 1 | 220nF FH(Guangdong Fenghua Advanced Tech) | C_1206 | C9 |
| 4 | 22uF Samsung Electro-Mechanics | C_1206 | C10, C11, C17, C30 |
| 3 | 100nF Samsung Electro-Mechanics | C_0402 | C12, C14, C15 |
| 1 | 120uF Samsung Electro-Mechanics | C_0603 | C13 |
| 1 | 47nF Samsung Electro-Mechanics | C_0603 | C16 |
| 6 | 100nF YAGEO | C_0603 | C19, C22, C23, C27, C28, C29 |
| 1 | 1uF Samsung Electro-Mechanics | C_0603 | C20 |
| 1 | 10nF FH(Guangdong Fenghua Advanced Tech) | C_0603 | C21 |
| 2 | 5.1K | R_0603 | R1, R2 |
| 2 | 10kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R3, R15 |
| 5 | 100kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R5, R6, R7, R10, R11 |
| 2 | 20kΩ UNI-ROYAL(Uniroyal Elec) | R_0402 | R8, R9 |
| 2 | 27Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R12, R13 |
| 3 | 4.7kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R14, R17, R18 |
| 1 | 5kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R16 |
| 1 | 650Ω UNI-ROYAL(Uniroyal Elec) | R_0603 | R19 |
| 3 | 1.5kΩ UNI-ROYAL(Uniroyal Elec) | R_0603 | R20, R21, R22 |
Air scales design files
The KiCad project lives in the beaked99/air-scales repository on GitHub; these links point at the commit this page was built from.
Air scales: common questions
What microcontroller does the Air scales use?
The Air scales is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.
How big is the Air scales PCB?
The Air scales measures 45 × 95 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Air scales?
80 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Air scales design files?
From the beaked99/air-scales repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Air scales design in my own project?
The repository has no license, so all rights stay with beaked99. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Air scales without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in air-scales
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k