Esp32-battery charging monitoring
bogdan-kovalchuk·esp32-battery-charging-monitoring·hardware/battery-monitor-rev-a/battery-monitor-rev-a.kicad_pcb
About the Esp32-battery charging monitoring PCB
Esp32-battery charging monitoring is an open source ESP32 PCB design by bogdan-kovalchuk, published on GitHub under the MIT license. It is a 4-layer board measuring 62 × 50 mm, with 60 components from 38 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the LMR38010SDDAR, TPS3808G33DBVR, USBLC6-2SC6, ADS1115IDGSR and Ra-02. By type, the board carries 25 resistors, 16 capacitors, 6 ICs, 4 connectors, 4 diodes and 2 transistors.
It belongs with the power & battery, rf & radio and iot & wireless designs in this gallery.
From the project
An ESP32-based 12 V battery voltage monitor. The firmware measures battery voltage, while a Flask backend delivers notifications to a Signal group through signal-cli.
An ESP32-based 12 V battery voltage monitor. The firmware measures battery voltage, while a Flask backend delivers notifications to a Signal group through signal-cli.
- Voltage sampling every 60 seconds - Immediate ALERT when voltage drops to or below the critical threshold - Immediate INFO when voltage recovers - Separate reminder intervals for INFO and ALERT states - Fallback WiFi access point with a web configuration form - CRC-protected ESP32 configuration stored in alternating NVS slots - Persistent SQLite outbox with retries and eventid` deduplication - Optional HTTP or HTTPS transport…
Main components on the Esp32-battery charging monitoring
Esp32-battery charging monitoring bill of materials (BOM)
60 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMR38010SDDAR Texas Instruments | TI_SO-PowerPAD-8 | U101 |
| 1 | ESP32-S3-WROOM-1-N16R8 (or -N16 / -N8, same footprint) ESP32-S3-WROOM-1-N16R8 Espressif | ESP32-S3-WROOM-1 | U201 |
| 1 | TPS3808G33DBVR Texas Instruments | SOT-23-6 | U202 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U203 |
| 1 | ADS1115IDGSR Texas Instruments | TSSOP-10_3x3mm_P0.5mm | U301 |
| 1 | Ra-02 Ai-Thinker | Ra02_Source | U401 |
| 1 | SI2309CDS-T1-GE3 SI2309CDS Vishay Siliconix | SOT-23 | Q501 |
| 1 | MMBT5551LT1G MMBT5551 onsemi | SOT-23 | Q503 |
| 1 | BAT | SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm | J101 |
| 1 | USB4105-GF-A GCT | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J201 |
| 1 | B3B-XH-A(LF)(SN) VOLTMETER JST | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J503 |
| 1 | B2B-XH-A(LF)(SN) BTN_EXT JST | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J504 |
| 1 | 0451002.MRL 2A 125V Littelfuse | Fuse_Littelfuse-NANO2-451_453 | F101 |
| 1 | 0466.250NRHF 0.25A 125V Littelfuse | Fuse_1206_3216Metric | F501 |
| 1 | B1100-13-F B1100 Diodes Incorporated | D_SMA | D101 |
| 1 | SMAJ33A-TR SMAJ33A STMicroelectronics | D_SMA | D102 |
| 1 | LTST-C191KGKT GREEN Lite-On | LED_0603_1608Metric | D501 |
| 1 | KP-1608SURCK RED Kingbright | LED_0603_1608Metric | D502 |
| 1 | SRN6045-220M 22uH Bourns | L_Bourns_SRN6045TA | L101 |
| 1 | EEE-FK2A220P 22uF 100V Panasonic | CP_Elec_8x10 | C101 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GRM32EC72A106KE05L 10uF 100V Murata | C_1210_3225Metric | C102 |
| 1 | CL10B104KC8NNNC 100nF 100V Samsung | C_0603_1608Metric | C103 |
| 8 | CL10B104KB8NNNC 100nF Samsung | C_0603_1608Metric | C104, C202, C203, C204, C205, C301, C302, C402 |
| 4 | GRM21BR61E226ME44L 22uF Murata | C_0805_2012Metric | C105, C106, C107, C201 |
| 1 | CL21A106KAYNNNE 10uF Samsung | C_0805_2012Metric | C401 |
| 1 | RC0603FR-0768KL 68k Yageo | R_0603_1608Metric | R101 |
| 1 | 0603SAF5103T5E 510k Royal Ohm | R_0603_1608Metric | R102 |
| 1 | RC0603FR-07220KL 220k Yageo | R_0603_1608Metric | R103 |
| 5 | 0603SAF1002T5E 10k Royal Ohm | R_0603_1608Metric | R201, R202, R401, R501, R507 |
| 2 | RC0603FR-075K1L 5.1k Yageo | R_0603_1608Metric | R205, R206 |
| 2 | RC0603FR-0722RL 22 Yageo | R_0603_1608Metric | R208, R209 |
| 1 | ERA-6AEB224V 220k 0.1% Panasonic | R_0805_2012Metric | R304 |
| 1 | RT0603BRD0710KL 10k 0.1% Yageo | R_0603_1608Metric | R305 |
| 4 | RC0603FR-071KL 1k Yageo | R_0603_1608Metric | R307, R502, R503, R510 |
| 2 | 0603SAF4701T5E 4.7k Royal Ohm | R_0603_1608Metric | R504, R505 |
| 3 | AC0603FR-07100KL 100k Yageo | R_0603_1608Metric | R506, R508, R509 |
| 1 | RC2512JK-074R7L 4.7 2512 1W Yageo | R_2512_6332Metric | R511 |
| 1 | 1206S4F1002T5E 10k Royal Ohm | R_1206_3216Metric | R512 |
Esp32-battery charging monitoring design files
The KiCad project lives in the bogdan-kovalchuk/esp32-battery-charging-monitoring repository on GitHub; these links point at the commit this page was built from.
Esp32-battery charging monitoring: common questions
What microcontroller does the Esp32-battery charging monitoring use?
The Esp32-battery charging monitoring is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.
How big is the Esp32-battery charging monitoring PCB?
The Esp32-battery charging monitoring measures 62 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Esp32-battery charging monitoring?
60 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp32-battery charging monitoring design files?
From the bogdan-kovalchuk/esp32-battery-charging-monitoring repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Esp32-battery charging monitoring design in my own project?
Yes, under the terms of its MIT license, which bogdan-kovalchuk chose for the repository.
Can I test firmware for the Esp32-battery charging monitoring without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k