18 open source boards using the 8088
Real designs built with the 8088, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
NuXT
monotech
184.9 × 243.8 mm214 parts4LGPL-3.0120- schematic only · 89 parts
Proton Turbo XT
skiselev
89 partsNo license22 PIC
Nano8088
monotech
110.1 × 101.6 mm75 partsGPL-3.017Qx10 titan clone
brijohn
281 × 79 mm48 parts2LNo license9DubaiXTClone
spencer-uk
304.8 × 215.9 mm144 parts4LCERN-OHL-W-2.08Mad5160
madcatse
304.8 × 215.9 mm188 parts4LMIT5Tiny-8088
nkeck720
147.3 × 128.3 mm54 parts2LGPL-2.03AVR/Arduino
Sbc 8088
miselin
243.8 × 243.8 mm206 parts4LCERN-OHL-P-2.02My pcxt
ppsilv
258.4 × 104.1 mm85 parts2LNo license0Morse Board 8088 TEST BOARD
ifilot
172.1 × 108 mm80 parts2LCERN-OHL-S-2.00PIC
Micro 8088
Vakon84
152.4 × 101.6 mm71 partsGPL-3.00- schematic only · 164 parts
Xl-7-repro
computerguy096
164 partsGPL-3.00 - schematic only · 31 parts
Pravetz-16
enaix
31 partsNo license0 Prototype 8088
miselin
144.8 × 184.1 mm69 parts4LCERN-OHL-P-2.02PIC
Tralala8088homebrew
ppsilv
258.4 × 104.1 mm85 parts2LNo license0Morseboard-8088
ifilot
127 × 127 mm55 parts2LCERN-OHL-S-2.008088
homebrew8088
132 × 73.9 mm22 parts2LGPL-3.0238
How designs wire the 8088
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the 8088 connects to, and the resistors, capacitors and other passives placed on it.
- The SSO pin is left unconnected on 11 of 12 designs.
- The VCC pin has a decoupling capacitor on 8 of 12 designs, most often 100 nF (then 47 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 20 | Connected to: GND 100% | — |
| SSOpin 34 | Connected to: Not connected 92% | — |
| VCCpin 40 | Connected to: VCC 92% |
|
36 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Micro 8088 by skiselev, 8088 by homebrew8088, NuXT by monotech and Nano8088 by monotech.
The 8088 in open source designs
The gallery holds 18 open source boards using the 8088 from 15 GitHub repositories; a typical one measures about 172.1 × 107.9 mm and carries around 78 components.
58% are two-layer designs, the rest use four layers or more, and 72% carry an open source license.
The most starred is Micro 8088 by skiselev.
Parts used alongside the 8088
Microcontrollers on boards using the 8088
8088: common questions
Where can I find a 8088 reference design?
Each of the 18 boards on this page is a real design using the 8088. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 8088 SSO pin connected?
The SSO pin is left unconnected on 11 of 12 designs. Counted from the KiCad layouts of 12 open source designs using the 8088.
What decoupling capacitors do designs use on the 8088 VCC pin?
The VCC pin has a decoupling capacitor on 8 of 12 designs, most often 100 nF (then 47 nF). Counted from the KiCad layouts of 12 open source designs using the 8088.
What parts are used alongside the 8088?
The 8087, 74LS04, 74LS244, 74LS245 and 74LS74 appear in the most repositories here.
Which microcontrollers do boards using the 8088 use?
Most are built on PIC (5) and AVR/Arduino (1).
How big is a typical board using the 8088?
The median is 172.1 × 107.9 mm, and 58% are two-layer designs.
What is the most popular open source board using the 8088?
By GitHub stars, Micro 8088 by skiselev, with 414 stars.
Can I simulate one of these boards using the 8088 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.