8 open source boards using the 74F08
Real designs built with the 74F08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
St251n 20603
schlae
137.4 × 199.1 mm277 parts4LNo license38Kicad amiga2000
rhaamo
416.3 × 345.8 mm537 parts2LCC0-1.033Amiga 2000R6
iansbremner
416.8 × 346.1 mm553 parts2LNo license19CompaqportableIII
raymondh2
194 × 170.6 mm123 parts2LNo license17Qx10 titan clone
brijohn
281 × 79 mm48 parts2LNo license9Hydra-16
danstruthers
304.8 × 243.8 mm199 parts6LNo license1St296n 20741
schlae
137.4 × 199.1 mm269 parts4LNo license38St225 20427
schlae
136.8 × 199.1 mm212 parts2LNo license38
How designs wire the 74F08
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74F08 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a pull-up to 5V on 3 of 6 designs, most often 10 kΩ (then 332 Ω).
- Pin 10 has a pull-up to 5V on 3 of 6 designs, most often 1 kΩ (then 8.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 100% |
|
| Pin 2 | Connected to: A connector 33% |
|
| Pin 3 | Connected to: Signal 100% |
|
| Pin 6 | Connected to: A connector 33% |
|
| GNDpin 7 | Connected to: GND 83% · not connected 17% | — |
| Pin 8 | Connected to: Signal 83% · not connected 17% |
|
| Pin 10 | Connected to: 74LS08 33%, 74LS74A 33%, 8520 33% |
|
| Pin 12 | Connected to: A connector 33% |
|
| VCCpin 14 | Connected to: 5V 83% · not connected 17% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include St225 20427 by schlae, Kicad amiga2000 by rhaamo, Amiga 2000R6 by iansbremner and CompaqportableIII by raymondh2.
The 74F08 in open source designs
The gallery holds 8 open source boards using the 74F08 from 6 GitHub repositories; a typical one measures about 237.5 × 199.1 mm and carries around 241 components.
63% are two-layer designs, the rest use four layers or more, and 13% carry an open source license.
The most starred is St251n 20603 by schlae.
Parts used alongside the 74F08
What boards using the 74F08 are built for
74F08: common questions
Where can I find a 74F08 reference design?
Each of the 8 boards on this page is a real design using the 74F08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the 74F08 pin 1?
Pin 1 has a pull-up to 5V on 3 of 6 designs, most often 10 kΩ (then 332 Ω). Counted from the KiCad layouts of 6 open source designs using the 74F08.
What pull-up resistor is used on the 74F08 pin 10?
Pin 10 has a pull-up to 5V on 3 of 6 designs, most often 1 kΩ (then 8.2 kΩ). Counted from the KiCad layouts of 6 open source designs using the 74F08.
What parts are used alongside the 74F08?
The 74LS245, 74LS373, 74F04, 74F244 and 74F245 appear in the most repositories here.
How big is a typical board using the 74F08?
The median is 237.5 × 199.1 mm, and 63% are two-layer designs.
What is the most popular open source board using the 74F08?
By GitHub stars, St251n 20603 by schlae, with 38 stars.
Can I simulate one of these boards using the 74F08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.