25 open source boards using the SN74CBT3253
Real designs built with the SN74CBT3253, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MBRadioDual2
LadyRoninEngineer
97 × 79.5 mm99 parts2LUnlicense34AVR/Arduino
Software-Defined-Radio
Dizzerin
81.3 × 33.7 mm62 parts2LNo license24STM32
Simple sdr
pd0wm
79.8 × 23.9 mm49 parts2LMIT11DeltaSDR
cernohorsky
100 × 80 mm173 parts2LNo license9AVR/Arduino
SDRReciever
KonradMcClure
100 × 100 mm78 parts2LNo license7TI MSP430/CC
Big Red Satellite Flight Computer
Big-Red-Sat
81.1 × 75 mm243 parts4LCC-BY-SA-4.06Qsd2
Greg-R
100 × 75 mm68 parts2LGPL-3.04AVR/Arduino
Corrected ENGR357 Project v1.1
pricna
100 × 100 mm80 parts2LMPL-2.03Prototipo-R820T2
gmtii
77.6 × 37.9 mm98 parts2LMIT2STM32
Spartacus PCB REV1
vpcsln
100 × 175 mm436 parts6LNo license1STM32
Spartacus PCB REV1
spartacus-hf
100 × 175 mm436 parts6LCERN-OHL-S-2.01STM32
Chireix
vpcsln
100 × 175 mm435 parts6LNo license1ENGR357 SDR
jaronbrown
100 × 100 mm128 parts4LNo license1Qse2
Greg-R
100 × 75 mm80 parts2LGPL-3.01Qsd4
Greg-R
100 × 75 mm65 parts2LGPL-3.01RP2040/RP2350
Rf switchboard
Erhannis
100 × 174.6 mm463 parts4LNo license0Quadrature TX/RX Board
brucemack
70 × 100 mm92 parts4LGPL-3.00Pokus
cernohorsky
100 × 80 mm141 parts2LNo license9AVR/Arduino
SDRBackup2
KonradMcClure
100 × 100 mm76 parts2LNo license7AVR/Arduino
ENGR357 Project v1.1
pricna
74 × 72.1 mm66 parts2LMPL-2.03RP2040/RP2350
Frohne
frohro
100 × 100 mm215 parts4LNo license1Tx-1
brucemack
68 × 41 mm51 parts2LGPL-3.00AVR/Arduino
SDRBackup
KonradMcClure
100 × 100 mm69 parts2LNo license7Kc1fsz rx6
brucemack
60.3 × 46.5 mm48 parts2LGPL-3.00Band Pass Filter 1
brucemack
25 × 70 mm23 parts2LGPL-3.00
How designs wire the SN74CBT3253
Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the SN74CBT3253 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_16 pin has a decoupling capacitor on 15 of 18 designs, most often 100 nF (then 10 nF).
- The 1OE_1 pin is tied to GND on 16 of 18 designs (a signal on 2).
- The 2OE_15 pin is tied to GND on 16 of 18 designs (a signal on 2).
- The 1B4_3 pin has a series resistor on 10 of 18 designs, most often 100 Ω (then 51 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1OE_1pin 1 | Connected to: GND 89% | — |
| 1B4_3pin 3 | Connected to: Signal 78% · GND 17% |
|
| 1B3_4pin 4 | Connected to: Signal 78% · GND 17% |
|
| 1B2_5pin 5 | Connected to: Signal 78% · GND 17% |
|
| 1B1_6pin 6 | Connected to: Signal 83% · GND 17% |
|
| GND_8pin 8 | Connected to: GND 100% | — |
| 2B1_10pin 10 | Connected to: Signal 94% |
|
| 2B2_11pin 11 | Connected to: Signal 100% |
|
| 2B3_12pin 12 | Connected to: Signal 100% |
|
| 2B4_13pin 13 | Connected to: Signal 89% |
|
| 2OE_15pin 15 | Connected to: GND 89% | — |
| VCC_16pin 16 | Connected to: 5V 78% · a signal 22% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MBRadioDual2 by LadyRoninEngineer, Software-Defined-Radio by Dizzerin, Simple sdr by pd0wm and DeltaSDR by cernohorsky.
The SN74CBT3253 in open source designs
The gallery holds 25 open source boards using the SN74CBT3253 from 18 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 80 components.
68% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is MBRadioDual2 by LadyRoninEngineer.
Parts used alongside the SN74CBT3253
Microcontrollers on boards using the SN74CBT3253
What boards using the SN74CBT3253 are built for
SN74CBT3253: common questions
Where can I find a SN74CBT3253 reference design?
Each of the 25 boards on this page is a real design using the SN74CBT3253. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74CBT3253 VCC_16 pin?
The VCC_16 pin has a decoupling capacitor on 15 of 18 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 18 open source designs using the SN74CBT3253.
How is the SN74CBT3253 1OE_1 pin connected?
The 1OE_1 pin is tied to GND on 16 of 18 designs (a signal on 2). Counted from the KiCad layouts of 18 open source designs using the SN74CBT3253.
How is the SN74CBT3253 2OE_15 pin connected?
The 2OE_15 pin is tied to GND on 16 of 18 designs (a signal on 2). Counted from the KiCad layouts of 18 open source designs using the SN74CBT3253.
What parts are used alongside the SN74CBT3253?
The Si5351A-B-GT, LM4562, 161N-4BVS11, Arduino_Nano_v3.x and DSC1003DL2-008.0000T appear in the most repositories here.
Which microcontrollers do boards using the SN74CBT3253 use?
Most are built on AVR/Arduino (6), STM32 (4), RP2040/RP2350 (2) and TI MSP430/CC (1).
How big is a typical board using the SN74CBT3253?
The median is 100 × 80 mm, and 68% are two-layer designs.
What is the most popular open source board using the SN74CBT3253?
By GitHub stars, MBRadioDual2 by LadyRoninEngineer, with 34 stars.
Can I simulate one of these boards using the SN74CBT3253 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.