Gate
Bruhdows·klink·hardware/electronics/gate/gate.kicad_pcb
About the Gate PCB
Gate is an open source PCB design by Bruhdows, published on GitHub. It is a 2-layer board measuring 40 × 30 mm, with 5 components from 5 distinct parts.
By type, the board carries 2 connectors, 2 resistors and 1 capacitor.
It belongs with the sensors designs in this gallery.
From the project
Klink is an 80x80mm magnetic tile system for programmable marble runs. V1 keeps sixteen identical intelligent tiles, a six-port Hub, removable modules and a motorized elevator for continuous circulation. Sensors, buttons, RGB LEDs and a gate let a program react to marbles and peo
Klink is an 80x80mm magnetic tile system for programmable marble runs. V1 keeps sixteen identical intelligent tiles, a six-port Hub, removable modules and a motorized elevator for continuous circulation. Sensors, buttons, RGB LEDs and a gate let a program react to marbles and people.
The design is in progress. It is not ready for main-board fabrication or Fallen Design Submission. The remaining digital work and physical qualification gates are listed below.

Gate bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | M20-9990846 MODULE_SERVICE | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | M20-9990346 FS90_SERVO | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | C2012X7R1H104K125AE 100nF 50V X7R | C_0805_2012Metric | C1 |
| 1 | RC0805FR-074K7L 4.7k 1% | R_0805_2012Metric | R1 |
| 1 | RC0805FR-071KL 1k 1% | R_0805_2012Metric | R2 |
Gate design files
The KiCad project lives in the Bruhdows/klink repository on GitHub; these links point at the commit this page was built from.
Gate: common questions
How big is the Gate PCB?
The Gate measures 40 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gate?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Gate design files?
From the Bruhdows/klink repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Gate design in my own project?
The repository has no license, so all rights stay with Bruhdows. Use it as a reference, and ask the author before reusing the design.
More boards in klink
STM32
Hub
Bruhdows
148 × 78 mm309 parts4LNo license1WCH CH32/CH55x
Tile
Bruhdows
68 × 68 mm109 parts4LNo license1AVR/Arduino
Elevator
Bruhdows
60 × 44 mm47 parts4LNo license1Side flat test
Bruhdows
40 × 12 mm15 parts2LNo license1Side contact test
Bruhdows
40 × 28 mm15 parts2LNo license1Marble sensor
Bruhdows
50 × 36 mm11 parts2LNo license1Flat contact test
Bruhdows
20 × 12 mm6 parts2LNo license1Spring contact test
Bruhdows
20 × 12 mm6 parts2LNo license1Button
Bruhdows
40 × 30 mm4 parts2LNo license1
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956