Side contact test
Bruhdows·klink·hardware/electronics/contact-test/side-contact-test.kicad_pcb
About the Side contact test PCB
Side contact test is an open source PCB design by Bruhdows, published on GitHub. It is a 2-layer board measuring 40 × 28 mm, with 15 components from 9 distinct parts.
By type, the board carries 10 test points and 5 connectors.
It belongs with the sensors designs in this gallery.
From the project
Klink is an 80x80mm magnetic tile system for programmable marble runs. V1 keeps sixteen identical intelligent tiles, a six-port Hub, removable modules and a motorized elevator for continuous circulation. Sensors, buttons, RGB LEDs and a gate let a program react to marbles and peo
Klink is an 80x80mm magnetic tile system for programmable marble runs. V1 keeps sixteen identical intelligent tiles, a six-port Hub, removable modules and a motorized elevator for continuous circulation. Sensors, buttons, RGB LEDs and a gate let a program react to marbles and people.
The design is in progress. It is not ready for main-board fabrication or Fallen Design Submission. The remaining digital work and physical qualification gates are listed below.

Side contact test bill of materials (BOM)
15 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DEBUG_3V3_MONITOR S1961-46R | Harwin_S1961-46R_TestOnly | J1 |
| 1 | S1961-46R | Harwin_S1961-46R_TestOnly | J2 |
| 3 | EDGE_5P_TBD S1961-46R | Harwin_S1961-46R_TestOnly | J3, J4, J5 |
| 1 | BUS_20V FORCE | TP1 | |
| 1 | TILE_20V FORCE | TP2 | |
| 2 | FORCE | TP3, TP4 | |
| 1 | MODULE_5V FORCE | TP5 | |
| 1 | MODULE_20V SENSE | TP6 | |
| 4 | SENSE | TP7, TP8, TP9, TP10 |
Side contact test design files
The KiCad project lives in the Bruhdows/klink repository on GitHub; these links point at the commit this page was built from.
Side contact test: common questions
How big is the Side contact test PCB?
The Side contact test measures 40 × 28 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Side contact test?
15 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Side contact test design files?
From the Bruhdows/klink repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Side contact test design in my own project?
The repository has no license, so all rights stay with Bruhdows. Use it as a reference, and ask the author before reusing the design.
More boards in klink
STM32
Hub
Bruhdows
148 × 78 mm309 parts4LNo license1WCH CH32/CH55x
Tile
Bruhdows
68 × 68 mm109 parts4LNo license1AVR/Arduino
Elevator
Bruhdows
60 × 44 mm47 parts4LNo license1Side flat test
Bruhdows
40 × 12 mm15 parts2LNo license1Marble sensor
Bruhdows
50 × 36 mm11 parts2LNo license1Flat contact test
Bruhdows
20 × 12 mm6 parts2LNo license1Spring contact test
Bruhdows
20 × 12 mm6 parts2LNo license1Gate
Bruhdows
40 × 30 mm5 parts2LNo license1Button
Bruhdows
40 × 30 mm4 parts2LNo license1
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956