Marble sensor

Bruhdows·klink·hardware/electronics/marble-sensor/marble-sensor.kicad_pcb

Marble sensor PCB layout, top view — open source board by Bruhdows

About the Marble sensor PCB

Marble sensor is an open source PCB design by Bruhdows, published on GitHub. It is a 2-layer board measuring 50 × 36 mm, with 11 components from 10 distinct parts.

Other key parts include the AP2112K-3.3TRG1. By type, the board carries 4 resistors, 3 connectors, 3 capacitors and 1 IC.

It belongs with the sensors designs in this gallery.

From the project

Klink is an 80x80mm magnetic tile system for programmable marble runs. V1 keeps sixteen identical intelligent tiles, a six-port Hub, removable modules and a motorized elevator for continuous circulation. Sensors, buttons, RGB LEDs and a gate let a program react to marbles and peo

Klink is an 80x80mm magnetic tile system for programmable marble runs. V1 keeps sixteen identical intelligent tiles, a six-port Hub, removable modules and a motorized elevator for continuous circulation. Sensors, buttons, RGB LEDs and a gate let a program react to marbles and people.

The design is in progress. It is not ready for main-board fabrication or Fallen Design Submission. The remaining digital work and physical qualification gates are listed below.

Marble sensor, from the project README
From the project README

Main components on the Marble sensor

Marble sensor bill of materials (BOM)

11 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AP2112K-3.3TRG1
U1
1
M20-9990846
MODULE_SERVICE
J1
1
M20-9990246
IR_EMITTER
J2
1
M20-9990246
PHOTOTRANSISTOR_C_E
J3
2
C2012X7R1H105K125AB
1uF 16V
C1, C2
1
C2012C0G1H102J125AA
1nF 50V
C3
1
RC0805FR-072K2L
2.2k 1%
R1
1
RC1206FR-07220RL
220 1% 0.25W
R2
1
RC0805FR-0710KL
10k 1%
R3
1
RC0805FR-071KL
1k 1%
R4

Marble sensor design files

The KiCad project lives in the Bruhdows/klink repository on GitHub; these links point at the commit this page was built from.

Marble sensor: common questions

How big is the Marble sensor PCB?

The Marble sensor measures 50 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Marble sensor?

11 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Marble sensor design files?

From the Bruhdows/klink repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Marble sensor design in my own project?

The repository has no license, so all rights stay with Bruhdows. Use it as a reference, and ask the author before reusing the design.

More boards in klink

Similar boards