Esp32lcd
About the Esp32lcd PCB
Esp32lcd is an open source ESP32 PCB design by cjheath, published on GitHub. It is a 2-layer board measuring 78 × 44 mm, with 30 components from 22 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the TPS5430, CH340C and ILI9341_SPI_TOUCH_SD. By type, the board carries 10 resistors, 7 capacitors, 4 ICs, 3 transistors, 3 connectors and 2 diodes.
It belongs with the displays & leds and dev boards & breakouts designs in this gallery.
From the project
A development board for the ESP32 with a 2.4" touchscreen LCD
Main components on the Esp32lcd
Esp32lcd bill of materials (BOM)
30 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS5430 | TI_SO-PowerPAD-8_ThermalVias | U3 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U12 |
| 1 | ESP32-WROOM-32D | ESP32-WROOM-32 | U14 |
| 1 | ILI9341_SPI_TOUCH_SD ILI9341_SPI_Touch_SD | TJCTM24024-SPI | U15 |
| 2 | MMBT2222A_C8512 MMBT2222A | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q1, Q12 |
| 1 | MMBT5401-C8326 MMBT5401 | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q13 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P1.27mm_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB-C_SMD-TYPE-C-31-M-12 | J2 |
| 1 | C319131 Barrel_Jack_Switch | XKB-DC-009A-2.0 | J12 |
| 1 | TPAZ1143-04F TECH PUBLIC(台舟) | DFN-10_L2.5-W1.0-P0.50-BL-A | D1 |
| 1 | SS34_C8678 SS34 | SMA_L4.3-W2.6-LS5.2-RD | D2 |
| 1 | 15µH | L_1210_3225Metric | L2 |
| 1 | TAJB107K006RNJ 100uF | CASE-B_3528 | C3 |
| 1 | 0603B103K500NT 10nF | C0603 | C4 |
| 1 | CL21A475KAQNNNE 4.7uF | C0805 | C5 |
| 4 | CC0603KRX7R9BB104 100nF | C0603 | C11, C14, C15, C16 |
| 4 | 0603WAF1002T5E 10kΩ | R0603 | R1, R5, R12, R17 |
| 2 | 0603WAF5101T5E 5.1kΩ | R0603 | R2, R3 |
| 1 | 0603WAF5601T5E 5.6kΩ | R0603 | R6 |
| 1 | 0805W8F1003T5E_C149504 100kΩ | R0805 | R14 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0603WAF2200T5E 220Ω | R0603 | R15 |
| 1 | 0805W8F100JT5E 10Ω | R0805_NEW | R16 |
Esp32lcd design files
The KiCad project lives in the cjheath/esp32lcd repository on GitHub; these links point at the commit this page was built from.
Esp32lcd: common questions
What microcontroller does the Esp32lcd use?
The Esp32lcd is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the Esp32lcd PCB?
The Esp32lcd measures 78 × 44 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp32lcd?
30 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp32lcd design files?
From the cjheath/esp32lcd repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Esp32lcd design in my own project?
The repository has no license, so all rights stay with cjheath. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32lcd without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32Open Book Abridged Edition
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1k
ESP32Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0k
ESP32Badge
56.3 × 39 mm239 parts4LMIT4.0k
ESP32Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k
ESP32Racer
36 × 50.2 mm70 parts4LApache-2.03.8k
ESP32Bitaxe
skot
56.5 × 99.8 mm86 parts4LCERN-OHL-S-2.01.4k