10 open source boards using the MCP73831-2

Real designs built with the MCP73831-2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the MCP73831-2

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the MCP73831-2 connects to, and the resistors, capacitors and other passives placed on it.

  • The VBAT pin has a decoupling capacitor on 9 of 10 designs, most often 4.7 µF (then 10 µF).
  • The PROG pin has a resistor to GND on 9 of 10 designs, most often 10 kΩ (then 2 kΩ).
  • The STAT pin has a series resistor on 7 of 10 designs, most often 1 kΩ (then 470 Ω).
  • The VDD pin has a decoupling capacitor on 5 of 10 designs, most often 4.7 µF (then 10 µF).
STATpin 1Connected to: Signal 100%
  • Series resistor on 70% · 1 kΩ (2), 470 Ω (2), 10 kΩ (2)
VSSpin 2Connected to: GND 100%
VBATpin 3Connected to: VBAT 70% · a signal 30%
  • Decoupling capacitor on 90% · 4.7 µF (4), 10 µF (4), 1 µF (1)
VDDpin 4Connected to: VBUS 70% · a signal 30%
  • Decoupling capacitor on 50% · 4.7 µF (2), 10 µF (2), 1 µF (1)
PROGpin 5Connected to: Signal 100%
  • Resistor to GND on 90% · 10 kΩ (4), 2 kΩ (3), 7 kΩ (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ttntrackernode by ttnmapper, Lowpower epaper thermometer by antoinecellerier, MoonLander by graycatlabs and Breeze-SmartSensorHub by bluetiger9.

The MCP73831-2 in open source designs

The gallery holds 10 open source boards using the MCP73831-2 from 10 GitHub repositories; a typical one measures about 59 × 75 mm and carries around 57 components.

80% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Ttntrackernode by ttnmapper.

Parts used alongside the MCP73831-2

Microcontrollers on boards using the MCP73831-2

MCP73831-2: common questions

Where can I find a MCP73831-2 reference design?

Each of the 10 boards on this page is a real design using the MCP73831-2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the MCP73831-2 VBAT pin?

The VBAT pin has a decoupling capacitor on 9 of 10 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the MCP73831-2.

What resistor goes on the MCP73831-2 PROG pin?

The PROG pin has a resistor to GND on 9 of 10 designs, most often 10 kΩ (then 2 kΩ). Counted from the KiCad layouts of 10 open source designs using the MCP73831-2.

What resistor goes on the MCP73831-2 STAT pin?

The STAT pin has a series resistor on 7 of 10 designs, most often 1 kΩ (then 470 Ω). Counted from the KiCad layouts of 10 open source designs using the MCP73831-2.

Which microcontrollers do boards using the MCP73831-2 use?

Most are built on ESP32 (3), AVR/Arduino (1), ESP8266 (1) and NXP (1).

How big is a typical board using the MCP73831-2?

The median is 59 × 75 mm, and 80% are two-layer designs.

What is the most popular open source board using the MCP73831-2?

By GitHub stars, Ttntrackernode by ttnmapper, with 13 stars.

Can I simulate one of these boards using the MCP73831-2 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part