Ym2610
About the Ym2610 PCB
Ym2610 is an open source PCB design by dan-rodrigues, published on GitHub. It is a 4-layer board measuring 100.9 × 77.5 mm, with 157 components from 52 distinct parts.
Other key parts include the YM2610, YM3016, 74LVC1G34, 74LVCH245 and 74LV1T34. By type, the board carries 66 resistors, 55 capacitors, 21 ICs, 5 connectors, 3 switches and 1 module.
It belongs with the audio and retro computing designs in this gallery.
From the project
FPGA-based PCB to control a YM2610 sound synthesis chip.
Included is the schematic and PCB layout of the board.
Most ICs on the board are optional but a few are required in any case:
2x 74AHCT595: Shift registers to control the YM2610(B) and reset both the 2610 and the 3016. 1x 74LV1T34: Clock buffer, also shifts the 8MHz clock from 3.3v to 5v.
If ADPCM-A/B playback is needed, then these are required:
4x 74HCT153 1x 74LVC257 1x 74LVC2G08 1x 74LVC244
Main components on the Ym2610
Ym2610 bill of materials (BOM)
157 components, 52 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | YM2610 | DIP-64_W19.05mm_P1.78mm_Socket | U1 |
| 1 | YM3016 | DIP-16_W7.62mm_Socket | U2 |
| 1 | 74LVC1G34 | SOT-353_SC-70-5 | U3 |
| 1 | 74LVCH245 | TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | 74LV1T34 | SOT-23-5 | U5 |
| 3 | 74HCT573 | TSSOP-20_4.4x6.5mm_P0.65mm | U6, U7, U17 |
| 4 | 74HCT153 | TSSOP-16_4.4x5mm_P0.65mm | U8, U9, U19, U20 |
| 2 | TSV914IPT | TSSOP-14_4.4x5mm_P0.65mm | U10, U11 |
| 1 | AD8532 | TSSOP-8_4.4x3mm_P0.65mm | U12 |
| 1 | 74LVC2G08 | TSSOP-8_3x3mm_P0.65mm | U13 |
| 2 | 74AHCT595 | TSSOP-16_4.4x5mm_P0.65mm | U14, U15 |
| 1 | SPDIF_OPTICAL | FCR684208T | U16 |
| 1 | TLP2361 | SOIC-6-5_W4.55mm | U18 |
| 1 | 74LVC257 | TSSOP-16_4.4x5mm_P0.65mm | U21 |
| 1 | iCEBreaker_Bitsy | iCEBreaker_Bitsy_THT | A1 |
| 1 | MIDI_IN | CUI_SDS-50J | J1 |
| 1 | LINE_OUT | SWITCHCRAFT_35RAPC2BH3 | J2 |
| 1 | HEADPHONES | SWITCHCRAFT_35RAPC2BH3 | J3 |
| 1 | SPDIF_COAX | RCJ-04 | J4 |
| 1 | UART | PinHeader_1x03_P2.54mm_Vertical | J5 |
Show 32 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CRESET | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | SSG_VOLUME | PTD901-2015K-A103 | RV1 |
| 1 | FM_PCM_VOLUME | PTD902-2020K-A103 | RV2 |
| 1 | MIX_VOLUME | PTD902-2020K-A103 | RV3 |
| 1 | BTN_A | SW_SPST_PTS645 | SW1 |
| 1 | BTN_B | SW_SPST_PTS645 | SW2 |
| 1 | CRESET | SW_SPST_PTS645 | SW3 |
| 1 | 1N4148 | D_SOD-323 | D1 |
| 1 | BLM18PG221SN1D | L_0603_1608Metric | FB1 |
| 22 | 100nF | C_0603_1608Metric | C1, C16, C28, C29, C31, C32, C33, C34 +14 |
| 2 | 2.7nF | C_0603_1608Metric | C2, C3 |
| 5 | 10uF | C_0603_1608Metric | C4, C8, C30, C51, C53 |
| 10 | 4.7uF | C_0603_1608Metric | C5, C6, C7, C17, C18, C19, C20, C22 +2 |
| 4 | 220pF | C_0603_1608Metric | C9, C10, C11, C12 |
| 1 | 68pF | C_0603_1608Metric | C13 |
| 4 | 47pF | C_0603_1608Metric | C14, C15, C54, C55 |
| 3 | 10nF | C_0603_1608Metric | C21, C24, C25 |
| 2 | 270uF | CP_Elec_6.3x7.7 | C26, C27 |
| 1 | 1nF | C_0603_1608Metric | C49 |
| 1 | 150uF | CP_Elec_5x5.8 | C52 |
| 1 | 220R | R_0603_1608Metric | R1 |
| 10 | 10k | R_0603_1608Metric | R2, R3, R4, R5, R8, R9, R10, R11 +2 |
| 4 | 4.3k | R_0603_1608Metric | R6, R7, R12, R13 |
| 1 | 33R | R_0603_1608Metric | R14 |
| 15 | 100R | R_0603_1608Metric | R17, R18, R26, R27, R28, R29, R30, R31 +7 |
| 2 | 16R | R_0603_1608Metric | R19, R20 |
| 2 | 47k | R_0603_1608Metric | R21, R22 |
| 1 | 210R | R_0603_1608Metric | R23 |
| 1 | 110R | R_0603_1608Metric | R24 |
| 1 | 1k | R_0603_1608Metric | R25 |
| 26 | 100k | R_0603_1608Metric | R39, R40, R41, R42, R43, R44, R45, R46 +18 |
| 2 | 100R | R_Array_Convex_4x0603 | RN1, RN2 |
Ym2610 design files
The KiCad project lives in the dan-rodrigues/ym2610-pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/ym2610-pcb.kicad_pcb
Ym2610: common questions
How big is the Ym2610 PCB?
The Ym2610 measures 100.9 × 77.5 mm, has 4 copper layers and is 1.6002 mm thick.
How many components are on the Ym2610?
157 components, from 52 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ym2610 design files?
From the dan-rodrigues/ym2610-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ym2610 design in my own project?
The repository has no license, so all rights stay with dan-rodrigues. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
OpenTendo
Redherring32
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.0850
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800