8 open source boards using the 74HCT153
Real designs built with the 74HCT153, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Omega-Mainboard
skiselev
333.4 × 149.9 mm248 parts2LGPL-3.0456Omega-Mainboard
merlinkv
333.4 × 149.9 mm248 parts2LGPL-3.040Ym2610
dan-rodrigues
100.9 × 77.5 mm157 parts4LNo license29MSX ONE
jdgabbard
200 × 150 mm107 parts2LGPL-3.028Omega-Mainboard
msx-solis
333.4 × 149.9 mm248 parts2LGPL-3.07Omega mainboard1.3eu
msx-solis
333.4 × 149.9 mm252 parts2LGPL-3.05ALU
89Mods
209.6 × 108 mm82 parts4LMIT2V0c
KITTY-6502
234 × 87.3 mm119 parts2LNo license0
How designs wire the 74HCT153
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74HCT153 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| VCCpin 16 | Connected to: VCC 100% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, Omega-Mainboard by merlinkv, Ym2610-pcb by dan-rodrigues and MSX ONE by jdgabbard.
The 74HCT153 in open source designs
The gallery holds 8 open source boards using the 74HCT153 from 8 GitHub repositories; a typical one measures about 283.7 × 149.9 mm and carries around 203 components.
75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Omega-Mainboard by skiselev.
Parts used alongside the 74HCT153
What boards using the 74HCT153 are built for
74HCT153: common questions
Where can I find a 74HCT153 reference design?
Each of the 8 boards on this page is a real design using the 74HCT153. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT153 VCC pin?
The VCC pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the 74HCT153.
What parts are used alongside the 74HCT153?
The 74HCT157, 74HCT04, 74HCT74, 74LS07 and YM2149 appear in the most repositories here.
How big is a typical board using the 74HCT153?
The median is 283.7 × 149.9 mm, and 75% are two-layer designs.
What is the most popular open source board using the 74HCT153?
By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.
Can I simulate one of these boards using the 74HCT153 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.