6 open source boards using the 74LVC2G08

Real designs built with the 74LVC2G08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the 74LVC2G08

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LVC2G08 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 10 µF).
Pin 1Connected to: Signal 83% · not connected 17%
  • Resistor to GND on 33% · 10 kΩ (1), 1 kΩ (1)
Pin 2Connected to: Signal 100%
  • Resistor to GND on 33% · 10 kΩ (1), 1 kΩ (1)
GNDpin 4Connected to: GND 100%
Pin 5Connected to: Signal 67% · not connected 33%
  • Resistor to GND on 33% · 10 kΩ (2)
Pin 7Connected to: Signal 67% · not connected 33%
  • Resistor to GND on 33% · 10 kΩ (2)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 50% · 100 nF (5), 10 µF (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ym2610-pcb by dan-rodrigues, 4IDEAdapter by gianlucarenzi, Batt Boardv1 by UChicago-Space-Program and HiveCam by BioroboticsLab.

The 74LVC2G08 in open source designs

The gallery holds 6 open source boards using the 74LVC2G08 from 6 GitHub repositories; a typical one measures about 95.6 × 98 mm and carries around 69 components.

67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Ym2610-pcb by dan-rodrigues.

Microcontrollers on boards using the 74LVC2G08

What boards using the 74LVC2G08 are built for

74LVC2G08: common questions

Where can I find a 74LVC2G08 reference design?

Each of the 6 boards on this page is a real design using the 74LVC2G08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC2G08 VCC pin?

The VCC pin has a decoupling capacitor on 3 of 6 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 6 open source designs using the 74LVC2G08.

Which microcontrollers do boards using the 74LVC2G08 use?

Most are built on RP2040/RP2350 (1).

How big is a typical board using the 74LVC2G08?

The median is 95.6 × 98 mm, and 67% are two-layer designs.

What is the most popular open source board using the 74LVC2G08?

By GitHub stars, Ym2610-pcb by dan-rodrigues, with 29 stars.

Can I simulate one of these boards using the 74LVC2G08 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part