5 open source boards using the STM32N657X0H3Q
Real designs built with the STM32N657X0H3Q, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
V2.0
cornway
77 × 40 mm146 parts4LNo license6ESP32
Open race v2
teehee567
90.5 × 49.5 mm329 parts8LNo license4STM32
Roboterarm1
tobiasbaas
62.4 × 94.3 mm216 parts4LNo license1STM32
Aero32
Kiya86
40 × 75 mm161 parts6LNo license1STM32
Stm32n6-px4
DataFlux-Robot
55 × 28 mm21 parts6LApache-2.01
How designs wire the STM32N657X0H3Q
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32N657X0H3Q connects to, and the resistors, capacitors and other passives placed on it.
- The PH0-_OSC_IN pin has a crystal on 5 of 5 designs, most often 24 MHz (then 48 MHz).
- The PQ6 pin is left unconnected on 5 of 5 designs.
- The OTG2_HS_DM pin is left unconnected on 5 of 5 designs.
- The PE15 pin is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PDR_ONpin A1 | Connected to: 1.8V 80% · a signal 20% | — |
| PQ6pin A2 | Connected to: Not connected 100% | — |
| OTG2_HS_DMpin A3 | Connected to: Not connected 100% | — |
| VDD33US_Bpin A4 | Connected to: 3.3V 80% · a signal 20% |
|
| UCPD1_C_C1pin A6 | Connected to: Not connected 80% · a signal 20% | — |
| PH0-_OSC_INpin A7 | Connected to: Signal 100% |
|
| PC10pin A8 | Connected to: Not connected 80% · a signal 20% | — |
| PC1pin A9 | Connected to: Signal 60% · not connected 40% |
|
| PE13pin A11 | Connected to: Not connected 80% · a signal 20% | — |
| PE15pin A12 | Connected to: Not connected 100% | — |
| PD10pin A13 | Connected to: Not connected 60% · a signal 40% | — |
| PE9pin A16 | Connected to: Not connected 60% · a signal 40% | — |
| VSS_1pin A17 | Connected to: GND 100% | — |
| PH3pin B1 | Connected to: Not connected 80% · a signal 20% | — |
| PH6pin B2 | Connected to: Not connected 80% · a signal 20% | — |
| OTG2_HS_DPpin B3 | Connected to: Not connected 100% | — |
| NC_1pin B4 | Connected to: Not connected 100% | — |
| UCPD1_C_C2pin B6 | Connected to: Not connected 80% · a signal 20% | — |
| PH1-_OSC_OUTpin B7 | Connected to: Signal 80% · not connected 20% |
|
| PC11pin B8 | Connected to: Not connected 60% · a signal 40% | — |
| PC6pin B9 | Connected to: Not connected 60% · a signal 40% | — |
| PC5pin B10 | Connected to: Not connected 60% · a signal 40% | — |
| PE14pin B11 | Connected to: Not connected 80% · a signal 20% | — |
| PE12pin B12 | Connected to: Not connected 80% · a signal 20% | — |
| PE7pin B13 | Connected to: Not connected 60% · a signal 40% |
|
| PD4pin B15 | Connected to: Not connected 80% · a signal 20% | — |
| PB14pin B17 | Connected to: Not connected 80% · a signal 20% | — |
| PC15-_OSC32_O_UTpin C1 | Connected to: Signal 80% · not connected 20% |
|
| PH8pin C2 | Connected to: Not connected 80% · a signal 20% | — |
| OTG1_IDpin C3 | Connected to: Not connected 100% | — |
| NC_2pin C4 | Connected to: Not connected 100% | — |
| VDDA18U_SBpin C5 | Connected to: 1.8V 100% |
|
| OTG1_TX_RTUNEpin C6 | Connected to: Signal 60% · not connected 40% |
|
| PC9pin C7 | Connected to: Not connected 60% · a signal 40% | — |
| PC7pin C9 | Connected to: Not connected 80% · a signal 20% | — |
| PC0pin C10 | Connected to: Not connected 60% · a signal 40% | — |
| PD2pin C12 | Connected to: Not connected 60% · a signal 40% | — |
| PD12pin C13 | Connected to: Not connected 80% · a signal 20% | — |
| PD14pin C14 | Connected to: Not connected 60% · a signal 40% | — |
| PB13pin C15 | Connected to: Not connected 80% · a signal 20% | — |
120 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include V2.0 by cornway, Open race v2 by teehee567, Stm32n6-px4 by DataFlux-Robot and Aero32 by Kiya86.
The STM32N657X0H3Q in open source designs
The gallery holds 5 open source boards using the STM32N657X0H3Q from 5 GitHub repositories; a typical one measures about 62.3 × 49.5 mm and carries around 161 components.
100% use four copper layers or more, and 20% carry an open source license.
The most starred is V2.0 by cornway.
What boards using the STM32N657X0H3Q are built for
STM32N657X0H3Q: common questions
Where can I find a STM32N657X0H3Q reference design?
Each of the 5 boards on this page is a real design using the STM32N657X0H3Q. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32N657X0H3Q PH0-_OSC_IN pin connected?
The PH0-_OSC_IN pin has a crystal on 5 of 5 designs, most often 24 MHz (then 48 MHz). Counted from the KiCad layouts of 5 open source designs using the STM32N657X0H3Q.
How is the STM32N657X0H3Q PQ6 pin connected?
The PQ6 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the STM32N657X0H3Q.
How is the STM32N657X0H3Q OTG2_HS_DM pin connected?
The OTG2_HS_DM pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the STM32N657X0H3Q.
Which microcontrollers do boards using the STM32N657X0H3Q use?
Most are built on STM32 (4) and ESP32 (1).
How big is a typical board using the STM32N657X0H3Q?
The median is 62.3 × 49.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32N657X0H3Q?
By GitHub stars, V2.0 by cornway, with 6 stars.
Can I simulate one of these boards using the STM32N657X0H3Q before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.