27 open source boards using the 74HCT157
Real designs built with the 74HCT157, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Omega-Mainboard
skiselev
333.4 × 149.9 mm248 parts2LGPL-3.0456AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT314Amiga 2000 EATX
jasonsbeer
304.8 × 330.2 mm599 parts4LGPL-3.0199Omega-Mainboard
merlinkv
333.4 × 149.9 mm248 parts2LGPL-3.040MSX ONE
jdgabbard
200 × 150 mm107 parts2LGPL-3.028Random Jazz Generator
telec16
167.8 × 200.6 mm126 parts2LNo license16AVR/Arduino
Emurom
jtsiomb
90.6 × 77.8 mm48 parts2LCC-BY-SA-4.015Omega-Mainboard
msx-solis
333.4 × 149.9 mm248 parts2LGPL-3.07Arc module
andrew-bolin
100 × 85 mm85 parts2LNo license6Omega mainboard1.3eu
msx-solis
333.4 × 149.9 mm252 parts2LGPL-3.056309-Unleashed
FredericSegard
252.7 × 106.7 mm95 parts2LNo license3OSM39
christophetoularastel-eng
388.1 × 200 mm186 parts2LGPL-3.01AVR/Arduino
8bit computer
saktheeswaranswan
297.2 × 180.3 mm327 parts2LMIT0Excalibur64
Cptscorcher
209 × 175 mm125 parts2LGPL-3.00Pcie pi module
andrew-bolin
100 × 68.9 mm15 parts2LNo license6VideoBoard
Cptscorcher
143 × 175 mm51 parts2LGPL-3.00Xy register
TomNisbet
102 × 96 mm60 parts2LMIT18Registers
89Mods
209.6 × 108.5 mm98 parts4LMIT2P8x alu card
ksr
280 × 140 mm77 parts4LNo license0Commodore VIC-20 8KB RAM Expansion
BrettHallen
62.9 × 61.6 mm15 parts2LNo license4ALU
89Mods
209.6 × 108 mm82 parts4LMIT2Rev a physical
ddanila
200 × 200 mm119 parts4LNo license1Control
89Mods
209.6 × 108.5 mm81 parts4LMIT28-bit computer ALU
xrayer2000
99.1 × 87.6 mm46 parts2LCC-BY-NC-4.030NEC PC Engine
tebl
58.4 × 38.1 mm25 parts2LCERN-OHL-1.227Memory
89Mods
209.6 × 108.5 mm58 parts4LMIT2NQSAP-PCB Flags and Jump Control
TomNisbet
102 × 96 mm29 parts2LMIT18
How designs wire the 74HCT157
Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the 74HCT157 connects to, and the resistors, capacitors and other passives placed on it.
- The E pin is tied to GND on 19 of 20 designs.
- The VCC pin has a decoupling capacitor on 15 of 20 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| Epin 15 | Connected to: GND 95% | — |
| VCCpin 16 | Connected to: VCC 100% |
|
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega-Mainboard by skiselev, 8bit computer by vascofazza, Amiga 2000 EATX by jasonsbeer and Omega-Mainboard by merlinkv.
The 74HCT157 in open source designs
The gallery holds 27 open source boards using the 74HCT157 from 21 GitHub repositories; a typical one measures about 209.6 × 140 mm and carries around 95 components.
74% are two-layer designs, the rest use four layers or more, and 70% carry an open source license.
The most starred is Omega-Mainboard by skiselev.
Parts used alongside the 74HCT157
Microcontrollers on boards using the 74HCT157
What boards using the 74HCT157 are built for
74HCT157: common questions
Where can I find a 74HCT157 reference design?
Each of the 27 boards on this page is a real design using the 74HCT157. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74HCT157 E pin connected?
The E pin is tied to GND on 19 of 20 designs. Counted from the KiCad layouts of 21 open source designs using the 74HCT157.
What decoupling capacitors do designs use on the 74HCT157 VCC pin?
The VCC pin has a decoupling capacitor on 15 of 20 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 21 open source designs using the 74HCT157.
What parts are used alongside the 74HCT157?
The 74HCT04, 74HCT74, 74HCT245, 74HCT08 and 74HCT273 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT157 use?
Most are built on AVR/Arduino (3).
How big is a typical board using the 74HCT157?
The median is 209.6 × 140 mm, and 74% are two-layer designs.
What is the most popular open source board using the 74HCT157?
By GitHub stars, Omega-Mainboard by skiselev, with 456 stars.
Can I simulate one of these boards using the 74HCT157 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.