EX-MotorShield8874
DCC-EX·EX-MotorShield8874
About the EX-MotorShield8874 PCB
EX-MotorShield8874 is an open source PCB design by DCC-EX, published on GitHub under the CERN-OHL-W-2.0 license. It is a 4-layer board measuring 65.9 × 52.9 mm, with 75 components from 31 distinct parts.
Other key parts include the 74HC04, 74HC08, 74HC32, DRV8874PWPR and LMV321. By type, the board carries 33 capacitors, 18 resistors, 7 ICs, 6 connectors, 6 diodes and 3 transistors.
It belongs with the robotics & motion, dev boards & breakouts and power & battery designs in this gallery.
From the project
Design files for the open source 5A Motor Shield
The EX-Motorshield8874 is a pin compatible with the original Arduino Motor Shield Rev3 but provides significantly improved electrical performance for driving higher loads, with lower power dissipation, and improved usability.
The EX-Motorshield8874 is based on two DRV8874 H-bridge motor drivers with integrated current sensing from Texas Instruments (TI). It is used to drive inductive loads like relays, solenoids, DC and stepping motors.

Main components on the EX-MotorShield8874
EX-MotorShield8874 bill of materials (BOM)
75 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC04 | SO-14_3.9x8.65mm_P1.27mm | U101 |
| 1 | 74HC08 | SO-14_3.9x8.65mm_P1.27mm | U102 |
| 1 | 74HC32 | SO-14_3.9x8.65mm_P1.27mm | U103 |
| 2 | DRV8874PWPR | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46_HiAmp | U104, U105 |
| 1 | LMV321 | SOT-23-5 | U106 |
| 1 | TPS54302 | SOT-23-6 | U201 |
| 2 | AO3400A | SOT-23 | Q101, Q102 |
| 1 | AO4407C | SOIC-8_3.9x4.9mm_P1.27mm | Q201 |
| 2 | C409115 MC 1,5/ 2-G-3,5 | PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal_edited | J101, J103 |
| 1 | C160404 STEMMA QT | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J105 |
| 1 | CONN_02X04_SMD Conn_02x04_smd | PinHeader_2x04_P2.54mm_Vertical_SMD | J106 |
| 1 | CONN_01X04_F Conn_01x04_f | PinHeader_1x04_P2.54mm_Vertical_solderpad | J107 |
| 1 | C319134 Barrel_Jack_MountingPin | BarrelJack_2.1mm_SMD | J201 |
| 1 | C720477 Switch | SW_SPST_TS-1088-AR02016 | SW101 |
| 4 | 0603_LED_YELLOW 0603_LED_Yellow | LED_0603_1608Metric | D101, D102, D103, D104 |
| 1 | 10V | D_SOD-323 | D201 |
| 1 | 0603_LED_GREEN 0603_LED_Green | LED_0603_1608Metric | D202 |
| 1 | 15UH 15uH | L_7.1x6.6_H3_SLO0630H | L201 |
| 10 | 100N 100n | C_1005_(0402) | C101, C104, C107, C108, C114, C115, C208, C220 +2 |
| 5 | C13585 10u VM | C_1206_3216Metric | C102, C105, C203, C209, C210 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | C307331 100n VM | C_1005_(0402) | C103, C106, C211 |
| 2 | C337699 22n VM | C_1005_(0402) | C109, C110 |
| 8 | 22U 22u | C_0805_2012Metric | C111, C212, C213, C214, C216, C217, C218, C219 |
| 2 | 22N 22n | C_1005_(0402) | C112, C113 |
| 2 | C2972719 100u VM | CP_Elec_6.3x7.7 | C201, C202 |
| 1 | 56P 56p | C_1005_(0402) | C215 |
| 10 | 47K 47k | R_1005_(0402) | R101, R102, R103, R104, R107, R108, R109, R110 +2 |
| 2 | 1K43 1k43 | R_1005_(0402) | R111, R112 |
| 2 | 732R | R_1005_(0402) | R113, R114 |
| 2 | 9K1 9k1 | R_1005_(0402) | R115, R204 |
| 2 | 100K 100k | R_1005_(0402) | R116, R203 |
EX-MotorShield8874 design files
The KiCad project lives in the DCC-EX/EX-MotorShield8874 repository on GitHub; these links point at the commit this page was built from.
EX-MotorShield8874: common questions
How big is the EX-MotorShield8874 PCB?
The EX-MotorShield8874 measures 65.9 × 52.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the EX-MotorShield8874?
75 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EX-MotorShield8874 design files?
From the DCC-EX/EX-MotorShield8874 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EX-MotorShield8874 design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which DCC-EX chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k