Lorawatch
dharaneesh-m-oss·lorawatch_pcb
About the Lorawatch PCB
Lorawatch is an open source ESP32 PCB design by dharaneesh-m-oss, published on GitHub. It is a 2-layer board measuring 65 × 77.5 mm, with 41 components from 23 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the MPU-6050, Ai-Thinker-Ra-02, BME280, TP4056-42-ESOP8 and AMS1117-3.3. By type, the board carries 17 capacitors, 7 ICs, 7 resistors, 3 connectors, 3 switches and 3 diodes.
It belongs with the rf & radio, power & battery and sensors designs in this gallery.
From the project
Compact LoRa-based Wearable IoT PCB using ESP32 with GPS, MPU6050, BME280, USB-C charging, and battery management designed in KiCad.
A compact, low-power LoRa-enabled wearable IoT hardware platform designed using KiCad. This PCB was developed by transforming our Smart India Hackathon (SIH) prototype into a custom embedded hardware solution.
The board integrates long-range communication, motion sensing, environmental monitoring, GPS connectivity, battery charging, and onboard power management into a compact PCB suitable for wearable and portable IoT applications.
Main components on the Lorawatch
Lorawatch bill of materials (BOM)
41 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32D | U1 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | Ai-Thinker-Ra-02 | Ai-Thinker-Ra-01-LoRa | U3 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U5 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U6 |
| 1 | GPS_MODULE | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | U7 |
| 1 | Conn_Coaxial | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J2 |
| 1 | battery | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P1 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 3 | SW_Push | SW_SPST_TL3342 | SW1, SW2, SW3 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 2 | LED | LED_0603_1608Metric | D2, D3 |
| 9 | 100n | C_0603_1608Metric | C1, C3, C5, C7, C9, C10, C11, C12 +1 |
| 1 | 2.2n | C_0603_1608Metric | C2 |
| 6 | 10u | C_0805_2012Metric | C4, C6, C8, C13, C14, C15 |
| 1 | 22u | C_1206_3216Metric | C16 |
| 2 | 10K | R_0603_1608Metric | R1, R2 |
| 1 | 2.4K | R_0603_1608Metric | R3 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1K | R_0603_1608Metric | R4, R5 |
| 1 | 5.1K | R_0603_1608Metric | R6 |
| 1 | 330 | R_0603_1608Metric | R7 |
Lorawatch design files
The KiCad project lives in the dharaneesh-m-oss/lorawatch_pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutlora.kicad_pcb
- Schematiclora.kicad_sch
Lorawatch: common questions
What microcontroller does the Lorawatch use?
The Lorawatch is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the Lorawatch PCB?
The Lorawatch measures 65 × 77.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lorawatch?
41 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Lorawatch design files?
From the dharaneesh-m-oss/lorawatch_pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Lorawatch design in my own project?
The repository has no license, so all rights stay with dharaneesh-m-oss. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Lorawatch without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k