HD Remote Clone
digamesystems·HD_Remote_Clone·hardware/hd_remote/hd_remote.kicad_pcb
About the HD Remote Clone PCB
HD Remote Clone is an open source ESP32 PCB design by digamesystems, published on GitHub under the GPL-2.0 license. It is a 2-layer board measuring 145.4 × 40.4 mm, with 95 components from 50 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the USBLC6-2SC6, CP2102N-A02-GQFN24, MCP73831-2-OT and RT9080-33GJ5. By type, the board carries 33 resistors, 25 capacitors, 11 switches, 7 diodes, 6 transistors and 5 ICs.
From the project
Open replacement for the Hunter Douglas Platinum shade remote: decoded IR protocol, the RF wake the shades need, and self-pairing. ESP32 + nRF24 (PlatformIO), KiCad handheld.
Rev 1 as ordered 2026-11-17: KiCad 3D render, not a photo. Top side, front (IR) end at the right. Some 3D models are stand-ins (the IR LEDs render green, the indicator white).
KiCad project for the handheld replacement remote: hdremote/hdremote.kicadpro`.
- Tool: KiCad 10 (the files open in 9.0 or newer). - Spec: docs/HARDWARE.md holds the design decisions, pin map, power budget and open questions. Change the spec first, then the schematic. - Breadboard wiring (the DevKitC prototype this board replaces): docs/WIRING.md.

Main components on the HD Remote Clone
HD Remote Clone bill of materials (BOM)
95 components, 50 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U101 |
| 1 | CP2102N-A02-GQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U102 |
| 1 | MCP73831-2-OT | SOT-23-5 | U103 |
| 1 | RT9080-33GJ5 | SOT-23-5 | U104 |
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32E | U201 |
| 2 | MMBT3904 | SOT-23 | Q101, Q102 |
| 2 | AO3401A | SOT-23 | Q103, Q104 |
| 2 | BC817-40 | SOT-23 | Q301, Q302 |
| 1 | C165948 USB_C_Receptacle | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J101 |
| 1 | Battery | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J102 |
| 1 | SLW-104-01-G-D nRF24_socket Samtec | PinHeader_2x04_P2.54mm_Vertical | J401 |
| 1 | C17477 0R | R_0805_2012Metric | JP101 |
| 1 | C269272 RESET | SW_Push_1P1T_NO_CK_KMR2 | SW201 |
| 1 | C269272 BOOT | SW_Push_1P1T_NO_CK_KMR2 | SW202 |
| 1 | TS02-66-130-BK-160-SCR-D UP Same Sky | SW_PUSH_6mm_H13mm | SW501 |
| 1 | TS02-66-130-BK-160-SCR-D DOWN Same Sky | SW_PUSH_6mm_H13mm | SW502 |
| 1 | TS02-66-130-BK-160-SCR-D ALL Same Sky | SW_PUSH_6mm_H13mm | SW503 |
| 1 | TS02-66-50-BK-160-SCR-D SETUP Same Sky | SW_PUSH_6mm_H5mm | SW504 |
| 1 | TS02-66-130-BK-160-SCR-D 1 Same Sky | SW_PUSH_6mm_H13mm | SW505 |
| 1 | TS02-66-130-BK-160-SCR-D 2 Same Sky | SW_PUSH_6mm_H13mm | SW506 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TS02-66-130-BK-160-SCR-D 3 Same Sky | SW_PUSH_6mm_H13mm | SW507 |
| 1 | TS02-66-130-BK-160-SCR-D 4 Same Sky | SW_PUSH_6mm_H13mm | SW508 |
| 1 | C221841 A/B | SW_SPDT_PCM12 | SW509 |
| 3 | GND | TestPoint_Keystone_5000-5004_Miniature | TP604, TP605, TP606 |
| 1 | C3034753 CHG | LED_Kingbright_APA1606_1.6x0.6mm_Horizontal | D101 |
| 1 | STPS1H100AY | D_SMA | D102 |
| 2 | 1N4148W | D_SOD-123 | D301, D302 |
| 2 | TSAL6200 Vishay | LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm | D303, D304 |
| 1 | WP59EGW Red/Green CC Kingbright | LED_D5.0mm-3 | D501 |
| 1 | C21189 0R (or bead) | L_0603_1608Metric | FB401 |
| 4 | 4.7U 4.7u | C_0603_1608Metric | C101, C103, C105, C106 |
| 14 | 100N 100n | C_0603_1608Metric | C102, C104, C109, C202, C302, C402, C501, C502 +6 |
| 3 | 1u | C_0603_1608Metric | C107, C108, C203 |
| 1 | 22U 22u | C_0805_2012Metric | C201 |
| 1 | 100U 100u | C_1206_3216Metric | C301 |
| 1 | 10U 10u | C_0805_2012Metric | C401 |
| 1 | 100u | C_1206_3216Metric | C403 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R101, R102 |
| 3 | 1k | R_0603_1608Metric | R103, R106, R111 |
| 1 | 22K 22k | R_0603_1608Metric | R104 |
| 1 | 47K 47k | R_0603_1608Metric | R105 |
| 5 | 10K 10k | R_0603_1608Metric | R107, R108, R109, R201, R202 |
| 1 | 3.9K 3.9k | R_0603_1608Metric | R110 |
| 2 | 1M | R_0603_1608Metric | R112, R113 |
| 12 | 100K 100k | R_0603_1608Metric | R114, R302, R402, R403, R501, R502, R503, R504 +4 |
| 1 | 470 | R_0603_1608Metric | R301 |
| 2 | 3.3 | R_0805_2012Metric | R303, R304 |
| 1 | 0 | R_0603_1608Metric | R401 |
| 1 | 330 | R_0603_1608Metric | R509 |
| 1 | 270 | R_0603_1608Metric | R510 |
HD Remote Clone design files
The KiCad project lives in the digamesystems/HD_Remote_Clone repository on GitHub; these links point at the commit this page was built from.
HD Remote Clone: common questions
What microcontroller does the HD Remote Clone use?
The HD Remote Clone is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the HD Remote Clone PCB?
The HD Remote Clone measures 145.4 × 40.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HD Remote Clone?
95 components, from 50 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the HD Remote Clone design files?
From the digamesystems/HD_Remote_Clone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the HD Remote Clone design in my own project?
Yes, under the terms of its GPL-2.0 license, which digamesystems chose for the repository.
Can I test firmware for the HD Remote Clone without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k