Riscduino Adpater Rev1.0
About the Riscduino Adpater Rev1.0 PCB
Riscduino Adpater Rev1.0 is an open source PCB design by dineshannayya, published on GitHub. It is a 2-layer board measuring 92.5 × 93.8 mm, with 49 components from 19 distinct parts.
Other key parts include the AMS1117, NUCLEO144-F746ZG, W25Q32FVSS and caravel_breakout. By type, the board carries 18 resistors, 7 connectors, 6 ICs, 6 diodes, 6 capacitors and 4 test points.
From the project
Riscduino PCB Board documentation
Main components on the Riscduino Adpater Rev1.0
Riscduino Adpater Rev1.0 bill of materials (BOM)
49 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | AMS1117 | SOT-223-3_TabPin2 | U1, U2 |
| 1 | NUCLEO144-F746ZG | ST_Morpho_Connectors_144 | U3 |
| 2 | W25Q32FVSS | SOIC127P790X216-8N | U4, U6 |
| 1 | caravel_breakout | caravel_breakout_flexy_rev3D | U5 |
| 2 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J1, J4 |
| 1 | Conn_01x06_Female | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x11_Female | PinHeader_1x11_P2.54mm_Vertical | J5 |
| 2 | HTSW-120-08-F-D | SAMTEC_HTSW-120-08-F-D | P1, P2 |
| 1 | 10KP | TRIM_T73YU103KT20 | RV1 |
| 1 | 10KPot | TRIM_T73YU103KT20 | RV2 |
| 4 | TestPoint | TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TP1, TP2, TP3, TP4 |
| 6 | LED | LED_1206_3216Metric | D1, D2, D3, D4, D5, D6 |
| 2 | 22uF | CP_Radial_D6.3mm_P2.50mm | C1, C3 |
| 4 | 0.1uf - CC0805KRX7R9BB104 | C_1206_3216Metric | C2, C4, C5, C6 |
| 2 | 330Ohm | R_1206_3216Metric | R1, R3 |
| 2 | R | R_1206_3216Metric | R2, R12 |
| 2 | 180Ohm | R_1206_3216Metric | R4, R5 |
| 12 | 10k - RC0805FR-0710KL | R_1206_3216Metric | R6, R7, R8, R9, R10, R11, R13, R14 +4 |
Riscduino Adpater Rev1.0 design files
The KiCad project lives in the dineshannayya/riscduino_board repository on GitHub; these links point at the commit this page was built from.
Riscduino Adpater Rev1.0: common questions
How big is the Riscduino Adpater Rev1.0 PCB?
The Riscduino Adpater Rev1.0 measures 92.5 × 93.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Riscduino Adpater Rev1.0?
49 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Riscduino Adpater Rev1.0 design files?
From the dineshannayya/riscduino_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Riscduino Adpater Rev1.0 design in my own project?
The repository has no license, so all rights stay with dineshannayya. Use it as a reference, and ask the author before reusing the design.
More boards in riscduino_board
Riscduino Fpga Rev1.1
104.3 × 63.6 mm101 parts2LNo license2
Riscduino Debug Rev1.4
81.7 × 63.6 mm95 parts2LNo license2
Riscduino Uno
68.8 × 53.6 mm90 parts2LNo license2
Riscduino Tester
100.8 × 53.6 mm88 parts2LNo license2
AVR/ArduinoRiscduino ATMEGA Adpater Rev1.0
88.7 × 27.6 mm70 parts2LNo license2