Riscduino Fpga Rev1.1

dineshannayya·riscduino_board·KiCad_PCB/Riscduino_Fpga_Rev1.1/Riscduino_Fpga_Rev1.1.kicad_pcb

About the Riscduino Fpga Rev1.1 PCB

Riscduino Fpga Rev1.1 is an open source PCB design by dineshannayya, published on GitHub. It is a 2-layer board measuring 104.3 × 63.6 mm, with 101 components from 33 distinct parts.

Other key parts include the APX811-29UG-7, 23LC1024-I/P, CH340C, LM1117MP-3.3 and W25Q32JVSS. By type, the board carries 40 resistors, 22 connectors, 20 capacitors, 8 switches, 5 ICs and 5 diodes.

From the project

Riscduino PCB Board documentation

Main components on the Riscduino Fpga Rev1.1

APX811-29UG-7 23LC1024-I/P CH340C LM1117MP-3.3 W25Q32JVSS

Riscduino Fpga Rev1.1 bill of materials (BOM)

101 components, 33 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	APX811-29UG-7	SOT-143_Handsoldering	U1
1	23LC1024-I/P	DIP-8_W7.62mm_LongPads	U3
1	CH340C	SOIC-16_3.9x9.9mm_P1.27mm	U5
1	LM1117MP-3.3	SOT-223-3_TabPin2	U6
1	W25Q32JVSS	SOIC-8_5.23x5.23mm_P1.27mm	U8
1	ASE-10.000MHZ-LC-T	Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm	X1
1	Conn_01x06_Female_Header	PinHeader_1x06_P2.54mm_Vertical	J1
2	Conn_01x03_Male_Header	PinHeader_1x03_P2.54mm_Vertical	J2, J12
3	Conn_01x08_Female_Header	PinHeader_1x08_P2.54mm_Vertical	J3, J7, J10
3	Conn_01x01	PinHeader_1x01_P2.54mm_Vertical	J4, J8, J13
2	Conn_02x15_Male_Header	PinHeader_2x15_P2.54mm_Vertical	J5, J18
1	Conn_02x04_Male_Header	PinHeader_2x04_P2.54mm_Vertical	J6
2	USB_B_Micro_Female	USB_Micro-B_Molex-105017-0001	J9, J21
1	Conn_01x10_Female_Header	PinHeader_1x10_P2.54mm_Vertical	J11
1	Conn_01x06_Male_Header	PinHeader_1x06_P2.54mm_Vertical	J14
1	Conn_01x10_Male_Header	PinHeader_1x10_P2.54mm_Vertical	J15
2	Conn_01x08_Male_Header	PinHeader_1x08_P2.54mm_Vertical	J16, J17
1	Micro_SD_Card	microSD_HC_Molex_104031-0811	J19
1	USB Type A Female	USB_A_Molex_67643_Horizontal	J20
1	Conn_02x06_Male_Header	PinHeader_2x06_P2.54mm_Vertical	J22

Show 13 more

Qty	Part	Footprint	Refs
7	4Pin Round Button SPST Straight Tactile Switch SMD - TS4550TP	SW_SPST_EVPBF_TS4550TP	SW1, SW3, SW4, SW5, SW6, SW7, SW8
1	SW_DIP_x04	DIP-8_W7.62mm_LongPads	SW2
2	GREEN LED	LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder	D2, D4
3	BLUE LED	LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder	D3, D5, D6
17	0.1uF	C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C1, C2, C3, C4, C5, C7, C8, C9 +9
1	22uF	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C6
2	10uF	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C11, C13
6	0E	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R1, R3, R11, R18, R26, R27
1	DNI-0E	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R2
23	10K	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R4, R5, R6, R7, R8, R10, R12, R16 +15
3	DNI	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R9, R34, R35
6	470 Ohm	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R13, R14, R15, R28, R29, R30
1	100E	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R17

Riscduino Fpga Rev1.1 design files

The KiCad project lives in the dineshannayya/riscduino_board repository on GitHub; these links point at the commit this page was built from.

Riscduino Fpga Rev1.1: common questions

How big is the Riscduino Fpga Rev1.1 PCB?

The Riscduino Fpga Rev1.1 measures 104.3 × 63.6 mm, has 2 copper layers and is 1.61544 mm thick.

How many components are on the Riscduino Fpga Rev1.1?

101 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Riscduino Fpga Rev1.1 design files?

From the dineshannayya/riscduino_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.