Riscduino Debug Rev1.4

dineshannayya·riscduino_board·KiCad_PCB/Riscduino_Debug_Rev1.4/Riscduino_Debug_Rev1.4.kicad_pcb

About the Riscduino Debug Rev1.4 PCB

Riscduino Debug Rev1.4 is an open source PCB design by dineshannayya, published on GitHub. It is a 2-layer board measuring 81.7 × 63.6 mm, with 95 components from 35 distinct parts.

Other key parts include the APX811-29UG-7, W25Q32JVSS, 23LC1024-I/P, caravel-M.2-card and CH340C. By type, the board carries 35 resistors, 24 capacitors, 17 connectors, 8 ICs, 5 diodes and 2 jumpers.

From the project

Riscduino PCB Board documentation

Main components on the Riscduino Debug Rev1.4

APX811-29UG-7 W25Q32JVSS 23LC1024-I/P caravel-M.2-card CH340C LM1117MP-3.3 LM1117S-ADJ

Riscduino Debug Rev1.4 bill of materials (BOM)

95 components, 35 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	APX811-29UG-7	SOT-143_Handsoldering	U1
2	W25Q32JVSS	SOIC-8_5.23x5.23mm_P1.27mm	U2, U8
1	23LC1024-I/P	DIP-8_W7.62mm_LongPads	U3
1	caravel-M.2-card	M.2-CONNECTOR-E	U4
1	CH340C	SOIC-16_3.9x9.9mm_P1.27mm	U5
1	LM1117MP-3.3	SOT-223-3_TabPin2	U6
1	LM1117S-ADJ	SOT-223-3_TabPin2	U7
1	ASE-10.000MHZ-LC-T	Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm	X1
1	Conn_01x06_Female_Header	PinHeader_1x06_P2.54mm_Vertical	J1
1	ISP	PinHeader_2x03_P2.54mm_Vertical	J2
2	Conn_01x08_Female_Header	PinHeader_1x08_P2.54mm_Vertical	J3, J10
4	Conn_01x01	PinHeader_1x01_P2.54mm_Vertical	J4, J5, J8, J13
1	Conn_02x04_Odd_Even	PinHeader_2x04_P2.54mm_Vertical	J6
1	Conn_01x08_Pin	PinHeader_1x08_P2.54mm_Vertical	J7
1	USB_B_Micro	USB_Micro-B_Molex-105017-0001	J9
1	Conn_01x10_Female_Header	PinHeader_1x10_P2.54mm_Vertical	J11
1	Conn_01x03_Pin	PinHeader_1x03_P2.54mm_Vertical	J12
1	Conn_01x06_Male_Header	PinHeader_1x06_P2.54mm_Vertical	J14
1	Conn_01x10_Male_Header	PinHeader_1x10_P2.54mm_Vertical	J15
2	Conn_01x08_Male_Header	PinHeader_1x08_P2.54mm_Vertical	J16, J17

Show 15 more

Qty	Part	Footprint	Refs
1	MICROMOD-Standoff	MicroMod-Standoff	H2
2	Jumper_2	PinHeader_1x02_P2.54mm_Vertical	JP1, JP2
1	500 Ohm Trim Pot	Potentiometer_Bourns_3296W_Vertical	RV1
1	4Pin Round Button SPST Straight Tactile Switch SMD - TS4550TP	SW_SPST_EVPBF_TS4550TP	SW1
4	GREEN LED	LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder	D2, D3, D4, D5
1	BLUE LED	LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder	D6
18	0.1uF	C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	C1, C2, C3, C4, C5, C7, C8, C12 +10
2	22uF	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C6, C17
4	10uF	C_0805_2012Metric_Pad1.18x1.45mm_HandSolder	C9, C10, C11, C13
14	10K	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R1, R2, R3, R4, R7, R8, R16, R22 +6
8	0E	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R5, R11, R18, R19, R20, R21, R26, R27
4	DNI	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R6, R9, R34, R35
1	0E-DNI	C_0603_1608Metric_Pad1.08x0.95mm_HandSolder	R10
7	470 Ohm	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R12, R13, R14, R15, R28, R29, R30
1	100E	R_0603_1608Metric_Pad0.98x0.95mm_HandSolder	R17

Riscduino Debug Rev1.4 design files

The KiCad project lives in the dineshannayya/riscduino_board repository on GitHub; these links point at the commit this page was built from.

Riscduino Debug Rev1.4: common questions

How big is the Riscduino Debug Rev1.4 PCB?

The Riscduino Debug Rev1.4 measures 81.7 × 63.6 mm, has 2 copper layers and is 1.61544 mm thick.

How many components are on the Riscduino Debug Rev1.4?

95 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Riscduino Debug Rev1.4 design files?

From the dineshannayya/riscduino_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.