Riscduino Uno
About the Riscduino Uno PCB
Riscduino Uno is an open source PCB design by dineshannayya, published on GitHub. It is a 2-layer board measuring 68.8 × 53.6 mm, with 90 components from 30 distinct parts.
Other key parts include the APX811-29UG-7, W25Q32JVSS, 23LC1024-I/P, Riscduino and LM1117MP-3.3. By type, the board carries 32 resistors, 28 capacitors, 12 connectors, 8 ICs, 5 diodes and 2 jumpers.
From the project
Riscduino PCB Board documentation
Main components on the Riscduino Uno
Riscduino Uno bill of materials (BOM)
90 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | APX811-29UG-7 | SOT-143_Handsoldering | U1 |
| 2 | W25Q32JVSS | SOIC-8_5.23x5.23mm_P1.27mm | U2, U8 |
| 1 | 23LC1024-I/P | DIP-8_W7.62mm_LongPads | U3 |
| 1 | Riscduino | RISCDUINO_QFN-64-1EP_9x9mm_P0.5mm_EP7.65x7.65mm_Ver1.1 | U4 |
| 1 | LM1117MP-3.3 | SOT-223-3_TabPin2 | U5 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U6 |
| 1 | LM1117S-ADJ | SOT-223-3_TabPin2 | U7 |
| 1 | ASE-10.000MHZ-LC-T | Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | X1 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | ISP | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 2 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J3, J9 |
| 4 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J4, J5, J7, J12 |
| 1 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J6 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J8 |
| 1 | Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J10 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 2 | Jumper_2 | PinHeader_1x02_P2.54mm_Vertical | JP1, JP2 |
| 1 | 500 Ohm Trim Pot | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 4Pin Round Button SPST Straight Tactile Switch SMD - TS4550TP | SW_SPST_EVPBF_TS4550TP | SW1 |
| 4 | GREEN LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D5 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BLUE LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 22 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +14 |
| 2 | 22uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C19 |
| 4 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16, C17, C20 |
| 14 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R10, R13, R19, R21 +6 |
| 7 | 0E | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R7, R9, R20, R25, R26 |
| 2 | DNI | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R14 |
| 1 | 0E-DNI | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | R11 |
| 1 | 0 Ohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 7 | 470 Ohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R16, R17, R18, R27, R28, R29 |
Riscduino Uno design files
The KiCad project lives in the dineshannayya/riscduino_board repository on GitHub; these links point at the commit this page was built from.
Riscduino Uno: common questions
How big is the Riscduino Uno PCB?
The Riscduino Uno measures 68.8 × 53.6 mm, has 2 copper layers and is 1.61544 mm thick.
How many components are on the Riscduino Uno?
90 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Riscduino Uno design files?
From the dineshannayya/riscduino_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Riscduino Uno design in my own project?
The repository has no license, so all rights stay with dineshannayya. Use it as a reference, and ask the author before reusing the design.
More boards in riscduino_board
Riscduino Fpga Rev1.1
104.3 × 63.6 mm101 parts2LNo license2
Riscduino Debug Rev1.4
81.7 × 63.6 mm95 parts2LNo license2
Riscduino Tester
100.8 × 53.6 mm88 parts2LNo license2
AVR/ArduinoRiscduino ATMEGA Adpater Rev1.0
88.7 × 27.6 mm70 parts2LNo license2
Riscduino Adpater Rev1.0
92.5 × 93.8 mm49 parts2LNo license2