6 open source boards using the LM1117S-ADJ
Real designs built with the LM1117S-ADJ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Riscduino Uno
dineshannayya
70.6 × 53.7 mm90 parts2LApache-2.02Riscduino Debug Rev1.4
dineshannayya
81.7 × 63.6 mm95 parts2LNo license2Riscduino Debug
dineshannayya
70.6 × 53.7 mm81 parts2LApache-2.02Riscduino Uno
dineshannayya
68.8 × 53.6 mm90 parts2LNo license2Riscduino Tester
dineshannayya
100.8 × 53.6 mm88 parts2LNo license2AVR/Arduino
Riscduino ATMEGA Adpater Rev1.0
dineshannayya
88.7 × 27.6 mm70 parts2LNo license2
The LM1117S-ADJ in open source designs
The gallery holds 6 open source boards using the LM1117S-ADJ from 2 GitHub repositories; a typical one measures about 76.2 × 53.7 mm and carries around 89 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Riscduino Debug Rev1.4 by dineshannayya.
Parts used alongside the LM1117S-ADJ
Microcontrollers on boards using the LM1117S-ADJ
What boards using the LM1117S-ADJ are built for
LM1117S-ADJ: common questions
Where can I find a LM1117S-ADJ reference design?
Each of the 6 boards on this page is a real design using the LM1117S-ADJ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LM1117S-ADJ?
The 23LC1024-I/P, CH340C, LM1117MP-3.3, MAX1232ESA+T and Riscduino appear in the most repositories here.
Which microcontrollers do boards using the LM1117S-ADJ use?
Most are built on AVR/Arduino (1).
How big is a typical board using the LM1117S-ADJ?
The median is 76.2 × 53.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the LM1117S-ADJ?
By GitHub stars, Riscduino Debug Rev1.4 by dineshannayya, with 2 stars.
Can I simulate one of these boards using the LM1117S-ADJ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.