ZYNQ7020 Development Board
About the ZYNQ7020 Development Board
ZYNQ7020 Development Board is an open source FPGA PCB design by dj140, published on GitHub. It is a 4-layer board measuring 86 × 69 mm, with 121 components from 47 distinct parts.
Its main chip is the HR911130A, from the FPGA family. Other key parts include the CP2102N-A01-GQFN28, TXS02612RTWR, TF_Card, TXS0108EPWR and USB3320. By type, the board carries 67 resistors, 28 capacitors, 10 connectors, 8 ICs, 3 diodes and 2 crystals.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the ZYNQ7020 Development Board
ZYNQ7020 Development Board bill of materials (BOM)
121 components, 47 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | HR911130A | HR911130A | U1 |
| 1 | CP2102N-A01-GQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | TXS02612RTWR | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U4 |
| 1 | TF_Card | XKXFS-N02-XXT | U5 |
| 1 | TXS0108EPWR | TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 1 | USB3320 | QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U7 |
| 1 | TPS2051BDBV | SOT-23-5 | U8 |
| 1 | GL850G | SSOP-28_5.3x10.2mm_P0.65mm | U9 |
| 1 | 24Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 12Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 2 | Conn_02x50_Odd_Even | 51779844 | J1, J2 |
| 1 | ZYNQ_JTAG | PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 2 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Palconn_UTC16-G | J5, J9 |
| 1 | HDMI_A | HDMI-A_2086581001 | J6 |
| 2 | USB_A_Stacked | USB_A_Wuerth_61400826021_Horizontal_Stacked | J8, J11 |
| 1 | Conn_02x20_Odd_Even | PinHeader_2x20_P2.54mm_Vertical | J10 |
| 1 | Conn_01x30 | Hirose_FH12-30S-0.5SH_1x30-1MP_P0.50mm_Horizontal | J12 |
| 1 | Fuse_Small | Fuse_0805_2012Metric | F1 |
| 1 | SW_DIP_x01 | SW_SPST_B3U-1000P | SW2 |
| 1 | SW_DIP_x02 | SW_DIP_SPSTx02_Slide_Copal_CHS-02B_W7.62mm_P1.27mm | SW5 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | SS34 | D_SOD-123F | D1, D3 |
| 1 | BAS16XV2T1G | D_SOD-523 | D2 |
| 14 | 104 | C_0402_1005Metric | C1, C3, C4, C10, C11, C13, C16, C17 +6 |
| 4 | 106 | C_0603_1608Metric | C2, C12, C22, C30 |
| 3 | 106 | C_0805_2012Metric | C5, C6, C7 |
| 1 | 105 | C_0402_1005Metric | C9 |
| 2 | 475 | C_0603_1608Metric | C20, C23 |
| 4 | 18pF | C_0402_1005Metric | C25, C26, C27, C28 |
| 3 | 330R | R_0402_1005Metric | R1, R2, R22 |
| 6 | 20K | R_0402_1005Metric | R3, R4, R5, R12, R13, R54 |
| 6 | 33R | R_0402_1005Metric | R6, R7, R8, R9, R23, R40 |
| 7 | 10K | R_0402_1005Metric | R10, R11, R21, R44, R45, R53, R55 |
| 4 | 5.1K | R_0402_1005Metric | R14, R15, R49, R50 |
| 4 | 4.7K | R_0402_1005Metric | R16, R18, R20, R24 |
| 4 | 0Ω | R_0402_1005Metric | R17, R19, R58, R59 |
| 5 | 2.2K | R_0402_1005Metric | R25, R26, R27, R28, R29 |
| 3 | 100K | R_0402_1005Metric | R30, R48, R57 |
| 8 | 49.9R | R_0402_1005Metric | R31, R32, R33, R34, R35, R36, R37, R38 |
| 1 | 27K | R_0402_1005Metric | R39 |
| 1 | 8K06 | R_0402_1005Metric | R41 |
| 1 | 1.5K | R_0402_1005Metric | R42 |
| 2 | 1K | R_0402_1005Metric | R43, R47 |
| 1 | 1M | R_0402_1005Metric | R46 |
| 1 | 680R | R_0402_1005Metric | R51 |
| 1 | 510K | R_0402_1005Metric | R52 |
| 1 | 47K | R_0402_1005Metric | R56 |
| 8 | R_Pack04 | R_Array_Concave_4x0603 | RN1, RN2, RN3, RN4, RN5, RN6, RN7, RN8 |
ZYNQ7020 Development Board design files
The KiCad project lives in the dj140/ZYNQ7020_Development_Board repository on GitHub; these links point at the commit this page was built from.
- LayoutZYNQ7000_MINIMB.kicad_pcb
- SchematicZYNQ7000_MINIMB.kicad_sch
ZYNQ7020 Development Board: common questions
What microcontroller does the ZYNQ7020 Development Board use?
The ZYNQ7020 Development Board is built around the HR911130A, from the FPGA family.
How big is the ZYNQ7020 Development Board?
The ZYNQ7020 Development Board measures 86 × 69 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ZYNQ7020 Development Board?
121 components, from 47 distinct parts. The full bill of materials is listed on this page.
Where can I download the ZYNQ7020 Development Board design files?
From the dj140/ZYNQ7020_Development_Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ZYNQ7020 Development Board design in my own project?
The repository has no license, so all rights stay with dj140. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ZYNQ7020 Development Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGABase board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2k
FPGAThunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3k
FPGAUsb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3k
FPGATomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1k
FPGAIcepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865
FPGAGcvideo
ikorb
49 × 30 mm44 parts4LNo license765