15 open source boards using the TXS02612RTWR
Real designs built with the TXS02612RTWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Fmc usb gpio spi jtag
chipsalliance
76.5 × 69 mm136 parts6LApache-2.019FPGA
IO-SDR
rishivg
99.4 × 60 mm309 parts8LCERN-OHL-S-2.010FPGA
SDR Gen2
WA1CYB
92 × 92 mm622 parts12LMIT3FPGA
IO SDR 1.1
SunnyYoshimitsu
91.5 × 91.5 mm268 parts6LNo license3FPGA
ZynqBoard
tamapochi1
136.8 × 79 mm284 parts6LNo license2FPGA
ZYNQ7020 Development Board
dj140
86 × 69 mm121 parts4LNo license2FPGA
Zynqinator
rkarl2
100 × 102 mm631 parts8LAGPL-3.01FPGA
CORE
Han-ZenX
118 × 97 mm81 parts4LCustom license1FPGA
FPGA-Board
AbdulAjadi1
132.6 × 97.9 mm569 parts8LNo license0- schematic only · 24 partsESP32
Tucklet
RebornBeat
24 partsCustom license0 Fmc sdram
chipsalliance
76.5 × 69 mm63 parts4LApache-2.019FPGA
ZynqBoard2
tamapochi1
89 × 69 mm284 parts6LNo license2Controller
krasin
105 × 72 mm108 parts4LCERN-OHL-S-2.01Ovc5
osrf
98 × 97 mm197 parts6LApache-2.0207Ovc3
osrf
138 × 50 mm166 parts6LApache-2.0207
How designs wire the TXS02612RTWR
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TXS02612RTWR connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF).
- The VCCB1 pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF).
- The VCCB0 pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF).
- The DAT2B1 pin is left unconnected on 9 of 11 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2, 11 | Connected to: GND 100% | — |
| VCCApin 5 | Connected to: 1.8V 91% |
|
| DAT2B1pin 8 | Connected to: Not connected 82% · a signal 18% | — |
| CLKApin 9 | Connected to: The microcontroller 27% |
|
| DAT3B1pin 10 | Connected to: Not connected 82% · a signal 18% | — |
| CMDB1pin 12 | Connected to: Not connected 82% · a signal 18% | — |
| CLKB1pin 13 | Connected to: Not connected 82% · a signal 18% | — |
| DAT0B1pin 14 | Connected to: Not connected 64% · a signal 36% | — |
| DAT1B1pin 15 | Connected to: Not connected 82% · a signal 18% | — |
| VCCB1pin 17 | Connected to: 3.3V 91% |
|
| CMDB0pin 20 | Connected to: A connector 73% |
|
| VCCB0pin 21 | Connected to: 3.3V 91% |
|
| SELpin 24 | Connected to: Signal 73% · GND 27% |
|
| EPADpin 25 | Connected to: GND 100% | — |
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ovc3 by osrf, Fmc sdram by chipsalliance, IO-SDR by rishivg and IO SDR 1.1 by SunnyYoshimitsu.
The TXS02612RTWR in open source designs
The gallery holds 15 open source boards using the TXS02612RTWR from 12 GitHub repositories; a typical one measures about 98.7 × 75.5 mm and carries around 197 components.
100% use four copper layers or more, and 53% carry an open source license.
The most starred is Ovc5 by osrf.
Parts used alongside the TXS02612RTWR
What boards using the TXS02612RTWR are built for
TXS02612RTWR: common questions
Where can I find a TXS02612RTWR reference design?
Each of the 15 boards on this page is a real design using the TXS02612RTWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TXS02612RTWR VCCA pin?
The VCCA pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the TXS02612RTWR.
What decoupling capacitors do designs use on the TXS02612RTWR VCCB1 pin?
The VCCB1 pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the TXS02612RTWR.
What decoupling capacitors do designs use on the TXS02612RTWR VCCB0 pin?
The VCCB0 pin has a decoupling capacitor on 11 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the TXS02612RTWR.
What parts are used alongside the TXS02612RTWR?
The AD9361BBCZ, BNO085, H5TQ4G63AFR, MS5611-01BA and MX25U1635EZNI-10G appear in the most repositories here.
Which microcontrollers do boards using the TXS02612RTWR use?
Most are built on FPGA (9) and ESP32 (1).
How big is a typical board using the TXS02612RTWR?
The median is 98.7 × 75.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the TXS02612RTWR?
By GitHub stars, Ovc5 by osrf, with 207 stars.
Can I simulate one of these boards using the TXS02612RTWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.