6 open source boards using the GL850G

Real designs built with the GL850G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the GL850G

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the GL850G connects to, and the resistors, capacitors and other passives placed on it.

  • The X1 pin has a crystal on 5 of 5 designs, most often 12 MHz.
  • The X2 pin has a crystal on 5 of 5 designs, most often 12 MHz.
  • The OVCUR2 pin is left unconnected on 5 of 5 designs.
  • The PWEREN2 pin is left unconnected on 5 of 5 designs.
AVDDpin 1, 5, 10, 16Connected to: Signal 60% · VDDA 40%
  • Capacitor to GND on 80% · 100 nF (23), 1 µF (1)
  • Series resistor on 60% · 100 kΩ (5), 10 kΩ (4)
  • Inductor on 40% · 47 µH (4)
DM2pin 2Connected to: A connector 40%
  • Series resistor on 40% · 22 Ω (2)
DP2pin 3Connected to: A connector 40%
  • Series resistor on 40% · 22 Ω (2), 1.5 kΩ (1)
RREFpin 4Connected to: Signal 100%
  • Resistor to GND on 80% · 680 Ω (4)
X1pin 6Connected to: Signal 100%
  • Crystal on 100% · 12 MHz (5)
  • Capacitor to GND on 80% · 33 pF (2), 18 pF (1), 12 pF (1)
  • Series resistor on 40% · 1 MΩ (2)
X2pin 7Connected to: Signal 100%
  • Crystal on 100% · 12 MHz (5)
  • Capacitor to GND on 80% · 33 pF (2), 18 pF (1), 12 pF (1)
  • Series resistor on 40% · 1 MΩ (2)
RESETNpin 13Connected to: Signal 100%
  • Resistor to GND on 80% · 47 kΩ (3)
  • Capacitor to GND on 80% · 1 µF (2), 100 nF (1)
  • Series resistor on 60% · 10 kΩ (3)
  • Pull-up to 5V on 40% · 10 kΩ (2)
TEST/SCLpin 14Connected to: Not connected 60% · GND 20% · a signal 20%
GNDpin 15Connected to: GND 80% · a signal 20%
PSELFpin 17Connected to: Signal 100%
  • Series resistor on 80% · 10 kΩ (2), 510 kΩ (1), 4.7 kΩ (1)
  • Pull-up to 3.3V on 40% · 10 kΩ (1), 470 kΩ (1)
PGANGpin 18Connected to: Signal 100%
  • Series resistor on 60% · 100 kΩ (2), 10 kΩ (1)
  • Pull-up to 3.3V on 40% · 47 kΩ (1), 100 kΩ (1)
OVCUR2pin 19Connected to: Not connected 100%
PWEREN2pin 20Connected to: Not connected 100%
OVCUR1pin 21Connected to: Signal 100%
  • Resistor to GND on 80% · 20 kΩ (2), 10 kΩ (2)
  • Pull-up to 5V on 60% · 10 kΩ (2), 5.1 kΩ (1)
  • Series resistor on 40% · 10 kΩ (2), 5.1 kΩ (1)
PWEREN1pin 22Connected to: Not connected 100%
V5pin 23Connected to: 5V 60% · a signal 40%
V33pin 24Connected to: Signal 80% · 3.3V 20%
  • Capacitor to GND on 80% · 10 µF (2), 100 nF (1)
  • Inductor on 60% · 47 µH (1)
  • Series resistor on 40% · 100 kΩ (2), 10 kΩ (1)
DM1pin 27Connected to: A connector 40%
  • Series resistor on 40% · 22 Ω (2)
DP1pin 28Connected to: A connector 40%
  • Series resistor on 40% · 22 Ω (2)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include USB Hub by llegoff, ZYNQ7020 Development Board by dj140, GiantKnob by mathisschmieder and USB Project by Lee34667.

The GL850G in open source designs

The gallery holds 6 open source boards using the GL850G from 5 GitHub repositories; a typical one measures about 93 × 70.3 mm and carries around 113 components.

67% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.

The most starred is USB Hub by llegoff.

Microcontrollers on boards using the GL850G

What boards using the GL850G are built for

GL850G: common questions

Where can I find a GL850G reference design?

Each of the 6 boards on this page is a real design using the GL850G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the GL850G X1 pin connected?

The X1 pin has a crystal on 5 of 5 designs, most often 12 MHz. Counted from the KiCad layouts of 5 open source designs using the GL850G.

How is the GL850G X2 pin connected?

The X2 pin has a crystal on 5 of 5 designs, most often 12 MHz. Counted from the KiCad layouts of 5 open source designs using the GL850G.

How is the GL850G OVCUR2 pin connected?

The OVCUR2 pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the GL850G.

Which microcontrollers do boards using the GL850G use?

Most are built on AVR/Arduino (1) and FPGA (1).

How big is a typical board using the GL850G?

The median is 93 × 70.3 mm, and 67% are two-layer designs.

What is the most popular open source board using the GL850G?

By GitHub stars, USB Hub by llegoff, with 8 stars.

Can I simulate one of these boards using the GL850G before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part