Hotswap ble

ebastler·cornholius·hotswap_ble/hotswap_ble.kicad_pcb

Hotswap ble PCB layout, top view — open source Nordic nRF board by ebastler

About the Hotswap ble PCB

Hotswap ble is an open source Nordic nRF PCB design by ebastler, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 271.8 × 103.9 mm, with 134 components from 25 distinct parts.

Its main chip is the NRF52840_E73-2G4M08S1C, from the Nordic nRF family. Other key parts include the MAX17048, BQ24075, SRV05-4 and 74LVC1G11. By type, the board carries 48 diodes, 14 capacitors, 11 resistors, 5 ICs, 2 connectors and 2 inductors.

It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.

From the project

ZMK-based replacement PCB for Cornelius keyboard

Cornholius is, first and foremost, a Bluetooth Low Energy capable replacement PCB for the Foostan Cornelius. Key and connector positions as well as PCB outline and plate were derived from the original Cornelius repository, but altered to fit the scope of this project - Thank you for open sourcing these files! In accordance with the license chosen by foostan, this project was published under the same license: CC BY-NC-SA 4.0.

Hotswap ble, from the project README
From the project README

Main components on the Hotswap ble

Hotswap ble bill of materials (BOM)

134 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MAX17048
U1
1
BQ24075
U2
1
SRV05-4
U3
1
NRF52840_E73-2G4M08S1C
nRF52840_E73-2G4M08S1C
U4
1
74LVC1G11
U5
1
C55208
32.768 KHz
Y1
1
TYPE-C-31-M-12
J1
1
78171-0002
J2
1
500MA
500mA
F1
48
C5184526
MX
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +40
1
C100056
RST
SW1
1
C2802677
IND
LED1
48
1N4148WT
D1, D2, D3, D4, D5, D6, D7, D8 +40
1
BLM15PX121SN1D
L1
1
10 uH
L2
6
4U7
4u7
C1, C2, C4, C7, C10, C11
4
1u
C3, C5, C8, C9
2
100N
100n
C6, C14
2
12P
12p
C12, C13
2
5K1
5k1
R1, R2
Show 5 more
QtyPartRefs
3
10K
10k
R3, R7, R8
1
47K
47k
R4
1
1K5
1k5
R5
1
2K2
2k2
R6
3
1k
R9, R10, R11

Hotswap ble design files

The KiCad project lives in the ebastler/cornholius repository on GitHub; these links point at the commit this page was built from.

Hotswap ble: common questions

What microcontroller does the Hotswap ble use?

The Hotswap ble is built around the NRF52840_E73-2G4M08S1C, from the Nordic nRF family.

How big is the Hotswap ble PCB?

The Hotswap ble measures 271.8 × 103.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hotswap ble?

134 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hotswap ble design files?

From the ebastler/cornholius repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hotswap ble design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Hotswap ble without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in cornholius

Similar boards