12 open source boards using the BQ24075
Real designs built with the BQ24075, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRF
Fusion
crides
125.8 × 91.8 mm100 parts2LNo license82Nordic nRF
Hotswap ble
ebastler
271.8 × 103.9 mm134 parts2LCC-BY-NC-4.037STM32
Kottoruwa hardware
bandakkalokka
317.5 × 134.6 mm229 parts4LGPL-3.012ESP32
Crazyflie control board
sPyOpenSource
40.1 × 38.1 mm92 parts4LMIT8STM32
24RF Remote Control
Yongxin-Lu
34.9 × 51.2 mm71 parts4LNo license3ESP32
Esp32 sensornode
rmd6502
70 × 33 mm35 parts2LApache-2.03STM32
Roboy crazyfly
Roboy
80.2 × 80.2 mm108 parts4LBSD-3-Clause2Nordic nRF
Orthus
Hob-dev
133.7 × 95.6 mm318 parts2LCC-BY-NC-4.01Nordic nRF
Pockey
Hob-dev
94.4 × 72.4 mm57 parts2LNo license1RP2040/RP2350
Greybadge25
NUSGreyhats
75 × 99 mm126 parts2LNo license0Nordic nRF
Pancake v8
Spaceboards
115.5 × 76.2 mm86 parts2LCERN-OHL-W-2.0144Psu
bfrigon
44.5 × 30.5 mm40 parts2LCC-BY-SA-4.018
How designs wire the BQ24075
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the BQ24075 connects to, and the resistors, capacitors and other passives placed on it.
- The TS pin has a resistor to GND on 11 of 12 designs, most often 10 kΩ.
- The ILIM pin has a resistor to GND on 11 of 11 designs, most often 1.5 kΩ (then 1.2 kΩ).
- The ISET pin has a resistor to GND on 11 of 11 designs, most often 2.2 kΩ (then 1 kΩ).
- The BAT pins have a decoupling capacitor on 10 of 12 designs, most often 4.7 µF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| TSpin 1 | Connected to: Signal 92% |
|
| BATpin 2, 3 | Connected to: BATT 71% · a signal 25% |
|
| CEpin 4 | Connected to: GND 75% · a signal 17% | — |
| VSSpin 8, 17 | Connected to: GND 100% | — |
| CHGpin 9 | Connected to: The microcontroller 27% |
|
| OUTpin 10, 11 | Connected to: VSW 64% · a signal 32% | — |
| ILIMpin 12 | Connected to: Signal 100% |
|
| INpin 13 | Connected to: 5V 64% · a signal 36% | — |
| TMRpin 14 | Connected to: Signal 82% |
|
| ISETpin 16 | Connected to: Signal 100% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pancake v8 by Spaceboards, Fusion by crides, Hotswap ble by ebastler and Psu by bfrigon.
The BQ24075 in open source designs
The gallery holds 12 open source boards using the BQ24075 from 12 GitHub repositories; a typical one measures about 87.3 × 78.2 mm and carries around 96 components.
67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Pancake v8 by Spaceboards.
Parts used alongside the BQ24075
Microcontrollers on boards using the BQ24075
What boards using the BQ24075 are built for
BQ24075: common questions
Where can I find a BQ24075 reference design?
Each of the 12 boards on this page is a real design using the BQ24075. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the BQ24075 TS pin?
The TS pin has a resistor to GND on 11 of 12 designs, most often 10 kΩ. Counted from the KiCad layouts of 12 open source designs using the BQ24075.
What resistor goes on the BQ24075 ILIM pin?
The ILIM pin has a resistor to GND on 11 of 11 designs, most often 1.5 kΩ (then 1.2 kΩ). Counted from the KiCad layouts of 12 open source designs using the BQ24075.
What resistor goes on the BQ24075 ISET pin?
The ISET pin has a resistor to GND on 11 of 11 designs, most often 2.2 kΩ (then 1 kΩ). Counted from the KiCad layouts of 12 open source designs using the BQ24075.
What parts are used alongside the BQ24075?
The SRV05-4, nRF52840_E73-2G4M08S1C, MAX17048, 74LVC1G11 and DW01A appear in the most repositories here.
Which microcontrollers do boards using the BQ24075 use?
Most are built on Nordic nRF (5), STM32 (3), ESP32 (2) and RP2040/RP2350 (1).
How big is a typical board using the BQ24075?
The median is 87.3 × 78.2 mm, and 67% are two-layer designs.
What is the most popular open source board using the BQ24075?
By GitHub stars, Pancake v8 by Spaceboards, with 144 stars.
Can I simulate one of these boards using the BQ24075 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.