Microohmetro uis

EDWARDPJ26·microohmetro-uis·hardware/kicad/microohmetro_v2.kicad_pcb

Microohmetro uis PCB layout, top view — open source ESP32 board by EDWARDPJ26

About the Microohmetro uis PCB

Microohmetro uis is an open source ESP32 PCB design by EDWARDPJ26, published on GitHub. It is a 4-layer board measuring 64 × 116 mm, with 93 components from 47 distinct parts.

Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the STUSB4500QTR, USBLC6-2SC6, BQ25895RTWR, AP2112K-3.3TRG1 and REF3325AIDBZR. By type, the board carries 36 capacitors, 26 resistors, 9 ICs, 6 transistors, 6 connectors and 5 diodes.

It belongs with the power & battery and iot & wireless designs in this gallery.

From the project

Proyecto de la asignatura Diseño de Sistemas Electrónicos de la Universidad Industrial de Santander (E3T), dictada por el profesor Jaime Barrero. Autores: Edward Andrés Pacheco Jurado (2222236) y Joseph Thomas Albarracín Contreras (2220415), 2026.

Proyecto de la asignatura Diseño de Sistemas Electrónicos de la Universidad Industrial de Santander (E3T), dictada por el profesor Jaime Barrero. Autores: Edward Andrés Pacheco Jurado (2222236) y Joseph Thomas Albarracín Contreras (2220415), 2026.

Es un instrumento portátil con medición Kelvin de 4 hilos. Usa corriente pulsada de dos niveles (1,042 A / 0,502 A) y medición ratiométrica, con un ADC sigma-delta AD7124-4 que aprovecha su PGA. El control lo hace un ESP32-C3, con BLE y OTA. Se alimenta de una LiPo 1S de 2000 mAh integrada en la PCB, que se carga por USB-C Power Delivery con un…

Microohmetro uis, from the project README
From the project README

Main components on the Microohmetro uis

Microohmetro uis bill of materials (BOM)

93 components, 47 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STUSB4500QTR
U101
1
USBLC6-2SC6
U102
1
BQ25895RTWR
U201
1
AP2112K-3.3TRG1
U301
1
REF3325AIDBZR
U401
1
OPA388IDBVR
U402
1
INA181A1IDBVR
U501
1
AD7124-4BBCPZ-RL7
U601
1
ESP32-C3-WROOM-02-N4
U701
3
AO3401A
Q101, Q201, Q202
2
2N7002
Q401, Q402
1
NTD25P03LT4G
Q403
1
Amphenol 12401610E4#2A
USB-C 24p 5 A
J101
1
S3B-XH-SM4-TB
LiPo 1S (JST XH)
J201
1
Borne 4 mm de panel rojo (agujero 6 mm)
I_PLUS (rojo)
J501
1
Borne 4 mm de panel amarillo (agujero 6 mm)
S_PLUS (amarillo)
J502
1
Borne 4 mm de panel azul (agujero 6 mm)
S_MINUS (azul)
J503
1
Borne 4 mm de panel negro (agujero 6 mm)
I_MINUS (negro)
J504
1
RESET
SW701
1
BOOT
SW702
Show 27 more
QtyPartRefs
1
NCP18XH103F03RB
10k NTC
TH201
1
SMBJ12A
D101
1
LED ambar CHG
D201
2
BAT54S
D601, D602
1
LED verde STAT
D701
1
BLM18KG601SN1D
600R@100MHz
FB301
1
SRN4018-2R2M
2.2u
L201
3
10U/25V
10u/25V
C101, C205, C206
8
1u
C102, C103, C104, C301, C401, C609, C610, C701
1
1U/25V
1u/25V
C201
1
47N
47n
C202
6
10U/10V
10u/10V
C203, C204, C208, C302, C303, C702
1
4.7U/10V
4.7u/10V
C207
9
100N
100n
C304, C404, C405, C501, C606, C607, C608, C611 +1
1
22N
22n
C402
2
10N
10n
C403, C603
4
1n
C601, C602, C604, C605
5
100K
100k
R101, R205, R405, R406, R407
1
178
R201
4
1k
R202, R601, R602, R706
1
5.23K
5.23k
R203
1
30.1K
30.1k
R204
8
10K
10k
R401, R403, R605, R701, R702, R703, R704, R705
1
9.31K
9.31k
R402
3
100
R404, R603, R604
1
WSK2512R1200FEA
0.12 1% 4T
R501
1
0.68
R502

Microohmetro uis design files

The KiCad project lives in the EDWARDPJ26/microohmetro-uis repository on GitHub; these links point at the commit this page was built from.

Microohmetro uis: common questions

What microcontroller does the Microohmetro uis use?

The Microohmetro uis is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.

How big is the Microohmetro uis PCB?

The Microohmetro uis measures 64 × 116 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Microohmetro uis?

93 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Microohmetro uis design files?

From the EDWARDPJ26/microohmetro-uis repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Microohmetro uis design in my own project?

The repository has no license, so all rights stay with EDWARDPJ26. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Microohmetro uis without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards