TRX4M-Lightkit
elchue·TRX4M-Lightkit·hardware/trx4m_light_xiao_breakout/trx4m_light_xiao_breakout.kicad_pcb
About the TRX4M-Lightkit PCB
TRX4M-Lightkit is an open source ESP32 PCB design by elchue, published on GitHub. It is a 2-layer board measuring 19.8 × 36.1 mm, with 15 components from 11 distinct parts.
Its main chip is the XIAO-ESP32-C6-SMD, from the ESP32 family. Other key parts include the 74LVC2T45DC and AP63205WU. By type, the board carries 5 capacitors, 3 ICs, 3 connectors, 2 resistors, 1 switch and 1 inductor.
It belongs with the displays & leds and dev boards & breakouts designs in this gallery.
From the project
Custom ESP32 controller to run the original Traxxas TRX-4M Pro Scale Light Kit with 3rd-party receivers (Flysky, Radiomaster) and aftermarket ESCs.
Ein maßgeschneidertes, intelligentes Steuergerät (basierend auf dem ESP32-C6), um das originale Traxxas TRX-4M Pro Scale Lichtkit (inkl. Lightbar) mit 3rd-Party Fernsteuerungen (wie Flysky Noble NB4, Radiomaster, Futaba etc.) und Aftermarket-ESCs weiterverwenden zu können!
Wer seinen TRX-4M auf Brushless (z. B. Furitek) oder eine professionelle Funke umbaut, verliert normalerweise die Funktion des originalen Traxxas-Lichtsets, da dieses fest an die Traxxas ECM-2.5 Einheit gebunden ist. Dieses Projekt ersetzt die Traxxas-Elektronik als "Gehirn" für die Lichter und wertet das System mit…
Main components on the TRX4M-Lightkit
TRX4M-Lightkit bill of materials (BOM)
15 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C6-SMD | XIAO-14P-Add-On | U1 |
| 1 | 74LVC2T45DC | VSSOP-8_2.3x2mm_P0.5mm | U2 |
| 1 | AP63205WU | TSOT-23-6 | U3 |
| 3 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J1, J2, J3 |
| 1 | SW_Push | SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | C2879693 4.7µH | L_Ferrocore_DLG-0403 | L1 |
| 2 | C49332972 470µF | CP_EIA-7343-20_Kemet-V | C1, C4 |
| 2 | 100NF 100nF | C_0805_2012Metric | C2, C5 |
| 1 | C15850 10µF | C_0805_2012Metric | C3 |
| 1 | 330R | R_0805_2012Metric | R1 |
| 1 | R330 | R_0805_2012Metric | R2 |
TRX4M-Lightkit design files
The KiCad project lives in the elchue/TRX4M-Lightkit repository on GitHub; these links point at the commit this page was built from.
TRX4M-Lightkit: common questions
What microcontroller does the TRX4M-Lightkit use?
The TRX4M-Lightkit is built around the XIAO-ESP32-C6-SMD, from the ESP32 family.
How big is the TRX4M-Lightkit PCB?
The TRX4M-Lightkit measures 19.8 × 36.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TRX4M-Lightkit?
15 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the TRX4M-Lightkit design files?
From the elchue/TRX4M-Lightkit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the TRX4M-Lightkit design in my own project?
The repository has no license, so all rights stay with elchue. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TRX4M-Lightkit without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k