USB CopyNES
famicomical·USB_CopyNES
About the USB CopyNES PCB
USB CopyNES is an open source PCB design by famicomical, published on GitHub. It is a 2-layer board measuring 88.8 × 114.5 mm, with 34 components from 25 distinct parts.
Other key parts include the 6522, 74HC32, 74HC157, 74HC138 and 74HC10. By type, the board carries 12 capacitors, 8 ICs, 8 resistors, 3 connectors, 1 transistor and 1 crystal.
It belongs with the retro computing designs in this gallery.
From the project
KiCad 9 recreation of the Sealie USB CopyNES V4 (rev D), traced from the original PCB
KiCad 9 recreation of the Sealie USB CopyNES V4 (rev D), made by tracing the original PCB.
- U3 spare inputs grounded. - R5 = 2.2k series / R6 = 10k pull-up, per FTDI reference design. - Board is re-routed in KiCad (Freerouting, hand-cleaned) with a bottom-layer GND pour; copper does not match the original trace-for-trace. Edge cuts and the positions of J2 (USB) and J6 (cart header) match and were taken from real measurements.

Main components on the USB CopyNES
USB CopyNES bill of materials (BOM)
34 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 6522 | DIP-40_W15.24mm | U1 |
| 1 | 74HC32 | DIP-14_W7.62mm | U3 |
| 1 | 74HC157 | DIP-16_W7.62mm | U4 |
| 1 | 74HC138 | DIP-16_W7.62mm | U6 |
| 1 | 74HC10 | DIP-14_W7.62mm | U7 |
| 1 | FT2232D | LQFP-48_7x7mm_P0.5mm | U8 |
| 1 | 93LC46B | DIP-8_W7.62mm | U12 |
| 1 | 27C256 | DIP-28_W15.24mm | U14 |
| 1 | 2N4401 | TO-92_Inline_Wide | Q1 |
| 1 | 6.00M | Resonator-3Pin_W10.0mm_H5.0mm | Y1 |
| 1 | USB_B | USB_B_OST_USB-B1HSxx_Horizontal | J2 |
| 1 | ~ | DIP-40_W15.24mm | J5 |
| 1 | Conn_02x20_Counter_Clockwise_2A03 | DIP-40_W15.24mm | J6 |
| 1 | EXP0 | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 9 | .1u | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 +1 |
| 1 | 10u | CP_Radial_D5.0mm_P2.00mm | C12 |
| 1 | 10n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C14 |
| 1 | 33n | C_Disc_D5.0mm_W2.5mm_P5.00mm | C15 |
| 1 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 2 | 27 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1.5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 270 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9 |
| 1 | 4.7k | R_Array_SIP10 | R10 |
USB CopyNES design files
The KiCad project lives in the famicomical/USB_CopyNES repository on GitHub; these links point at the commit this page was built from.
- LayoutUSB_CopyNES.kicad_pcb
- SchematicUSB_CopyNES.kicad_sch
USB CopyNES: common questions
How big is the USB CopyNES PCB?
The USB CopyNES measures 88.8 × 114.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB CopyNES?
34 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the USB CopyNES design files?
From the famicomical/USB_CopyNES repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the USB CopyNES design in my own project?
The repository has no license, so all rights stay with famicomical. Use it as a reference, and ask the author before reusing the design.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k