5 open source boards using the 93LC46B

Real designs built with the 93LC46B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the 93LC46B

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 93LC46B connects to, and the resistors, capacitors and other passives placed on it.

  • The DI pin has a series resistor on 5 of 5 designs, most often 2.2 kΩ (then 2 kΩ).
  • The DO pin has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ.
  • The DO pin has a series resistor on 3 of 5 designs, most often 2.2 kΩ.
  • The CS pin has a series resistor on 2 of 5 designs, most often 2 kΩ (then 2.2 kΩ).
CSpin 1Connected to: FT2232D 40%
  • Series resistor on 40% · 2 kΩ (1), 2.2 kΩ (1), 10 kΩ (1)
DIpin 3Connected to: FT2232H 40%, FT2232D 40%
  • Series resistor on 100% · 2.2 kΩ (4), 2 kΩ (1)
DOpin 4Connected to: FT2232H 40%
  • Pull-up to 3.3V on 60% · 10 kΩ (3)
  • Series resistor on 60% · 2.2 kΩ (3)
GNDpin 5Connected to: GND 60% · a signal 40%
NCpin 7Connected to: Not connected 100%
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (2)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Spartan6Dev by jonthomasson, 5-6GHz-FMCW-Radar by Radar-Uniwa, Pluto jtag adapter by teodor961 and ModBus-RJ45-Breakout-2 by the78mole.

The 93LC46B in open source designs

The gallery holds 5 open source boards using the 93LC46B from 5 GitHub repositories; a typical one measures about 88.8 × 61 mm and carries around 116 components.

60% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Spartan6Dev by jonthomasson.

Parts used alongside the 93LC46B

Microcontrollers on boards using the 93LC46B

What boards using the 93LC46B are built for

93LC46B: common questions

Where can I find a 93LC46B reference design?

Each of the 5 boards on this page is a real design using the 93LC46B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 93LC46B DI pin?

The DI pin has a series resistor on 5 of 5 designs, most often 2.2 kΩ (then 2 kΩ). Counted from the KiCad layouts of 5 open source designs using the 93LC46B.

What pull-up resistor is used on the 93LC46B DO pin?

The DO pin has a pull-up to 3.3V on 3 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the 93LC46B.

What resistor goes on the 93LC46B CS pin?

The CS pin has a series resistor on 2 of 5 designs, most often 2 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 5 open source designs using the 93LC46B.

Which microcontrollers do boards using the 93LC46B use?

Most are built on FPGA (1).

How big is a typical board using the 93LC46B?

The median is 88.8 × 61 mm, and 60% are two-layer designs.

What is the most popular open source board using the 93LC46B?

By GitHub stars, Spartan6Dev by jonthomasson, with 17 stars.

Can I simulate one of these boards using the 93LC46B before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part