10 open source boards using the 74HC10
Real designs built with the 74HC10, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
440BX
raszpl
304.8 × 243.8 mm650 parts4LGPL-3.06A1
smaldragon
190 × 100 mm121 parts2LUnlicense2Cisc-8
nailed-barnacle
299.7 × 198.1 mm315 parts2LMIT1Td4cpu
nikachu2012
144 × 100 mm90 parts2LNo license1Raspberry Pi
Gbczero
hahhen
71.4 × 128 mm78 parts2LNo license0USB CopyNES
famicomical
88.8 × 114.5 mm34 parts2LNo license0- schematic only · 558 parts
Breadboarding
MihrimatriX
558 partsMIT0 Sus
stonedDiscord
175.3 × 80.6 mm83 parts2LBSD-2-Clause5A0
smaldragon
190 × 100 mm118 parts2LUnlicense2A2
smaldragon
190 × 100 mm116 parts2LUnlicense2
How designs wire the 74HC10
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74HC10 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 100% | — |
| VCCpin 14 | Connected to: VCC 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sus by stonedDiscord, A0 by smaldragon, Cisc-8 by nailed-barnacle and Td4cpu by nikachu2012.
The 74HC10 in open source designs
The gallery holds 10 open source boards using the 74HC10 from 8 GitHub repositories; a typical one measures about 190 × 100 mm and carries around 117 components.
89% are two-layer designs, the rest use four layers or more, and 70% carry an open source license.
The most starred is 440BX by raszpl.
Parts used alongside the 74HC10
Microcontrollers on boards using the 74HC10
What boards using the 74HC10 are built for
74HC10: common questions
Where can I find a 74HC10 reference design?
Each of the 10 boards on this page is a real design using the 74HC10. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC10 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the 74HC10.
What parts are used alongside the 74HC10?
The 74HC32, 74HC04, 74HC138, 74HC00 and 74HC08 appear in the most repositories here.
Which microcontrollers do boards using the 74HC10 use?
Most are built on Raspberry Pi (1).
How big is a typical board using the 74HC10?
The median is 190 × 100 mm, and 89% are two-layer designs.
What is the most popular open source board using the 74HC10?
By GitHub stars, 440BX by raszpl, with 6 stars.
Can I simulate one of these boards using the 74HC10 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.