15 open source boards using the 6522

Real designs built with the 6522, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the 6522

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 6522 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF.
  • The RES pin has a pull-up to VCC on 4 of 9 designs, most often 10 kΩ (then 2.2 kΩ).
VSSpin 1Connected to: GND 100%
PB0pin 10Connected to: A connector 67%
  • Pull-up to VCC on 33% · 4.7 kΩ (2), 3.3 kΩ (1)
PB7pin 17Connected to: A connector 56%
  • Series resistor on 33% · 330 Ω (5), 22 kΩ (1), 3.3 kΩ (1)
  • Pull-up to VCC on 33% · 4.7 kΩ (3)
VCCpin 20Connected to: VCC 89%
  • Decoupling capacitor on 56% · 100 nF (6)
IRQpin 21Connected to: A connector 33%, 6522 22%, 6551 22%
  • Pull-up to VCC on 33% · 2.2 kΩ (1), 3.3 kΩ (1)
RESpin 34Connected to: 6522 33%, 6551 22%, a connector 22%
  • Pull-up to VCC on 44% · 10 kΩ (1), 2.2 kΩ (1), 22 kΩ (1)
RS1pin 37Connected to: 6522 22%, 6551 22%, a connector 22%
  • Series resistor on 33% · 3.3 kΩ (1), 75 Ω (1), 33 Ω (1)

33 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Junior computer by laurent-fr, TELESTRAT II by Fred72z, MetaphoricV2 by OldWer and Burstcart via by ytmytm.

The 6522 in open source designs

The gallery holds 15 open source boards using the 6522 from 9 GitHub repositories; a typical one measures about 170 × 113 mm and carries around 96 components.

87% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is Junior interface by laurent-fr.

Microcontrollers on boards using the 6522

What boards using the 6522 are built for

6522: common questions

Where can I find a 6522 reference design?

Each of the 15 boards on this page is a real design using the 6522. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 6522 VCC pin?

The VCC pin has a decoupling capacitor on 5 of 9 designs, most often 100 nF. Counted from the KiCad layouts of 9 open source designs using the 6522.

What pull-up resistor is used on the 6522 RES pin?

The RES pin has a pull-up to VCC on 4 of 9 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 9 open source designs using the 6522.

What parts are used alongside the 6522?

The 6551, 74LS00, LM386, 27C256 and 6502 appear in the most repositories here.

Which microcontrollers do boards using the 6522 use?

Most are built on AVR/Arduino (1) and PIC (1).

How big is a typical board using the 6522?

The median is 170 × 113 mm, and 87% are two-layer designs.

What is the most popular open source board using the 6522?

By GitHub stars, Junior interface by laurent-fr, with 14 stars.

Can I simulate one of these boards using the 6522 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part