ESP32 E-Paper-4.2 V1
filada·ESP32_E-Paper-4.2_V1·HW/ESP32_E-Paper_4-2_V1.kicad_pcb
About the ESP32 E-Paper-4.2 V1 PCB
ESP32 E-Paper-4.2 V1 is an open source ESP32 PCB design by filada, published on GitHub. It is a 2-layer board measuring 91 × 77 mm, with 68 components from 33 distinct parts.
Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the TP4054, MCP1700x-330xxMB, BME280 and DS18B20U. By type, the board carries 24 resistors, 22 capacitors, 5 ICs, 4 connectors, 4 switches and 4 diodes.
Main components on the ESP32 E-Paper-4.2 V1
ESP32 E-Paper-4.2 V1 bill of materials (BOM)
68 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32E | ESP32-WROOM-32D | U1 |
| 1 | TP4054 | TSOT-23-5 | U2 |
| 1 | MCP1700x-330xxMB | SOT-89-3 | U3 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | DS18B20U | MSOP-8_3x3mm_P0.65mm | U5 |
| 1 | Si1308EDL | SOT-323_SC-70 | Q2 |
| 1 | USB_C_Receptacle_PowerOnly_6P | USB_C_Receptacle_HRO_TYPE-C-31-M-17 | J1 |
| 1 | I2C | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | BATTERY | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | PROG | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Piezo | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | 1A | Fuse_1206_3216Metric | F1 |
| 1 | FPC_E-Paper JS(钜硕电子) | JUSHUO AFC24-S24FIC-00 | FPC1 |
| 4 | BTN1 | SW_PUSH_6mm_H7.3mm | SW1, SW2, SW3, SW4 |
| 1 | CHARGING | LED_1206_3216Metric | D1 |
| 3 | MBR0530 | D_SOD-123 | D2, D3, D4 |
| 1 | 10uH/1A | inductor_4.5x4_V1 | L1 |
| 4 | 10uF | C_0805_2012Metric | C1, C3, C5, C8 |
| 6 | 100nF | C_0805_2012Metric | C2, C4, C7, C20, C21, C22 |
| 8 | 4.7uF | C_0805_2012Metric | C6, C9, C10, C11, C12, C15, C16, C18 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1uF | C_0805_2012Metric | C13, C14, C17, C19 |
| 2 | 5K1 | R_0805_2012Metric | R1, R2 |
| 1 | 470R | R_0805_2012Metric | R3 |
| 1 | 1K65 | R_0805_2012Metric | R4 |
| 11 | 10K | R_0805_2012Metric | R5, R6, R7, R8, R11, R12, R14, R15 +3 |
| 1 | 1K | R_0805_2012Metric | R9 |
| 1 | 3K3 | R_0805_2012Metric | R10 |
| 1 | 100R | R_0805_2012Metric | R13 |
| 2 | 3R | R_0805_2012Metric | R16, R20 |
| 1 | 4K7 | R_0805_2012Metric | R17 |
| 1 | 0.47R | R_0805_2012Metric | R19 |
| 1 | 1M | R_0805_2012Metric | R22 |
| 1 | 1M3 | R_0805_2012Metric | R23 |
ESP32 E-Paper-4.2 V1 design files
The KiCad project lives in the filada/ESP32_E-Paper-4.2_V1 repository on GitHub; these links point at the commit this page was built from.
ESP32 E-Paper-4.2 V1: common questions
What microcontroller does the ESP32 E-Paper-4.2 V1 use?
The ESP32 E-Paper-4.2 V1 is built around the ESP32-WROOM-32E, from the ESP32 family.
How big is the ESP32 E-Paper-4.2 V1 PCB?
The ESP32 E-Paper-4.2 V1 measures 91 × 77 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32 E-Paper-4.2 V1?
68 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32 E-Paper-4.2 V1 design files?
From the filada/ESP32_E-Paper-4.2_V1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the ESP32 E-Paper-4.2 V1 design in my own project?
The repository has no license, so all rights stay with filada. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32 E-Paper-4.2 V1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k