ThermoBox
Focursed·ThermoBox
About the ThermoBox PCB
ThermoBox is an open source ESP32 PCB design by Focursed, published on GitHub. It is a 2-layer board measuring 49 × 64 mm, with 43 components from 27 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the USBLC6-2SC6, MCP73831-2-OT, ME6211C33M5 and SHT40. By type, the board carries 17 resistors, 10 capacitors, 5 ICs, 3 connectors, 3 switches and 2 transistors.
It belongs with the iot & wireless designs in this gallery.
From the project
ThermoBox: pocket ESP32-C3 thermometer-hygrometer with one-button games (KiCad schematic + PCB, firmware, case)
Маленькая коробочка: экран 0,96" OLED, датчик SHT40, аккумулятор LiPo, зарядка от USB‑C, боковая кнопка будит устройство из глубокого сна. Программируется через тот же USB‑C прямо из Arduino IDE.
Схема в PDF: docs/ThermoBoxschematic.pdf · исходник KiCad 10: ThermoBox.kicadsch
1. Arduino IDE 2.x → File → Preferences → Additional boards manager URLs: https://espressif.github.io/arduino-esp32/packageesp32index.json 2. Boards Manager → установи esp32 by Espressif Systems (версия 3.x). 3. Library Manager → установи U8g2 (by olikraus). Для SHT40 библиотека не нужна: он читается напрямую. 4.…

Main components on the ThermoBox
ThermoBox bill of materials (BOM)
43 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | MCP73831-2-OT | SOT-23-5 | U2 |
| 1 | ME6211C33M5 | SOT-23-5 | U3 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U4 |
| 1 | SHT40 | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U5 |
| 2 | AO3401A | SOT-23 | Q1, Q2 |
| 1 | USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | LiPo 1S 1000mAh | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | OLED 0.96 SSD1306 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | 500mA PTC | Fuse_1206_3216Metric | F1 |
| 1 | WAKE (side) | SW_SPST_EVQP7A | SW1 |
| 1 | RESET | SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | BOOT | SW_Push_SPST_NO_Alps_SKRK | SW3 |
| 1 | SS14 | D_SMA | D1 |
| 1 | CHG red | LED_0603_1608Metric | D2 |
| 2 | 4.7UF 4.7uF | C_0805_2012Metric | C1, C2 |
| 2 | 10UF 10uF | C_0805_2012Metric | C3, C4 |
| 3 | 100NF 100nF | C_0603_1608Metric | C5, C8, C10 |
| 2 | 1UF 1uF | C_0603_1608Metric | C6, C7 |
| 1 | 10NF 10nF | C_0603_1608Metric | C9 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 4.7k (210mA) | R_0603_1608Metric | R3 |
| 1 | 1k | R_0603_1608Metric | R4 |
| 5 | 100K 100k | R_0603_1608Metric | R5, R10, R13, R16, R17 |
| 4 | 10K 10k | R_0603_1608Metric | R6, R7, R8, R9 |
| 2 | 4.7K 4.7k | R_0603_1608Metric | R11, R12 |
| 2 | 1M | R_0603_1608Metric | R14, R15 |
ThermoBox design files
The KiCad project lives in the Focursed/ThermoBox repository on GitHub; these links point at the commit this page was built from.
- LayoutThermoBox.kicad_pcb
- SchematicThermoBox.kicad_sch
- BOMfab/ThermoBox_BOM.csv
ThermoBox: common questions
What microcontroller does the ThermoBox use?
The ThermoBox is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the ThermoBox PCB?
The ThermoBox measures 49 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ThermoBox?
43 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ThermoBox design files?
From the Focursed/ThermoBox repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ThermoBox design in my own project?
The repository has no license, so all rights stay with Focursed. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ThermoBox without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k