ESP32-EVB Rev A

fso-dev-man·ESP32-EVB-Board·HARDWARE/REV-A/ESP32-EVB_Rev_A.kicad_pcb

ESP32-EVB Rev A PCB layout, top view — open source ESP32 board by fso-dev-man

About the ESP32-EVB Rev A PCB

ESP32-EVB Rev A is an open source ESP32 PCB design by fso-dev-man, published on GitHub under the Apache-2.0 license. It is a 4-layer board measuring 75 × 57.2 mm, with 105 components from 65 distinct parts.

Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. Other key parts include the TP4054-42-SOT25-R, SY8009AAAC(SOT23-5) and LAN8710A-EZC(QFN32). By type, the board carries 41 resistors, 20 capacitors, 6 LEDs, 5 diodes, 4 ICs and 4 inductors.

It belongs with the power & battery designs in this gallery.

From the project

- revision A - internal, not released - revision B - initial public release - revision C - changes:

- revision A - internal, not released - revision B - initial public release - revision C - changes:

1. MicroUSB connector moved back, 40 mils to the middle of the board. 2. All mounting holes are now connected to GND. 3. Improved the ground layer around the infra red's pads and wires.

1. Changed R38 from 10k/0603 to 100k/0603 to lower the time without clock 2. Changed C28 from 100n/0603 to 10n/0603 to increase the time in reset

Main components on the ESP32-EVB Rev A

ESP32-EVB Rev A bill of materials (BOM)

105 components, 65 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TP4054-42-SOT25-R
MCP73833(MSOP10)
U1
1
SY8009AAAC(SOT23-5)
U2
1
ESP32-WROOM-32E-N4
ESP-WROOM-32
U3
1
LAN8710A-EZC(QFN32)
U4
2
BC817-40(SOT23)
Q1, Q2
2
DG306-5.0-3P
TB3 DG306-5.0-3P
CON1, CON2
2
Closed
400MA_E1, +5V_EN1
1
DW02R
BAT1
2
T1107A(6x3,8x2,5MM)
BUT1, BUT2
1
Q50MHZ/25PPM/3V/4P/5X3.2MM
NA(Q50MHz/25ppm/3V/4P/5x3.2mm)
CR1
1
HN2x20
EXT1
1
WPM2015-3
IRLML6402
FET1
1
NA(5025)
FUSE1
2
MOUNTING_HOLE_SHIELD_3.3MM
Mounting_hole_Shield_3.3mm
MH2, MH3
1
TFC-WXCP11-08-LF
MICRO_SD1
1
Opened
PHY_RST1
1
PWRJ-2mm(YDJ-1134)
PWR1
1
NA(TB2 DG306-5.0-2P)
PWR2
2
RAS-0515
REL1, REL2
1
RA1206_(4X0603)_4B8_100k
RM1
Show 45 more
QtyPartRefs
2
RA1206_(4X0603)_4B8_4.7k
RM2, RM3
1
BH10S
UEXT1
1
LED/RED/0603
BAT_LOW1
1
LED/YELLOW/0603
CHARGING1
1
LED/GREEN/0603
COMPLETE1
2
LED/GREEN/0603
LED1, LED2
1
LED/RED/0603
LED/Red/0603
PWRLED1
2
1N5819(S4 SOD-123)
D1, D3
1
SMBJ6.0A(DO-214AA)
D2
1
1N5822/SS34/SMA
D4
1
1N5819(S4SOD-123)
D5
3
600R/2A/UPZ2012E-601-2R0TF
FB0805/600R/2A
L1, L3, L4
1
2.2UH/NRS3015T2R2MNGH
2.2uH/1.5A/DCR<0.1R/CD32
L2
3
47uF/6.3V/20%/X5R/C0805
C1, C2, C10
1
470uF/10V/105C
C3
7
22uF/6.3V/20%/X5R/C0603
C4, C5, C6, C7, C8, C9, C12
5
100nF/50V/20%/Y5V/C0603
C11, C13, C14, C15, C17
1
2.2uF/6.3V/10%/X5R/C0603
C16
1
10uF/6.3V/20%/X5R/C0603
C18
1
1nF/2000V/10%/X7R/C1206
C19
1
NA(1nF/2000V/10%/X7R/C1206)
C20
2
1K/R0603
1k/R0603
R1, R5
7
10K/R0603
10k/R0603
R2, R6, R22, R23, R24, R29, R38
5
2.2K/R0603
2.2k/R0603
R3, R7, R11, R18, R21
1
2.2K/R0603
2.2k/R0402
R4
1
4.99k/1%/R0603
R8
1
470K/R0603
2.2k/R0603
R9
1
470K/R0603
4.99k/1%/R0603
R10
1
NA/R0603
1k/R0603
R12
1
330R/R0603
10k/0603
R13
4
220R/R0603
R14, R16, R26, R27
1
680R/R0603
2.2k/R0603
R15
1
NA/R0603
NA
R17
1
220K/R0603
4.99k/1%/R0402
R19
1
1.1k/1%/R0402
R20
1
0R(board_mounted)
R25
4
49.9R/1%/R0603
R28, R31, R32, R33
1
10K/R0603
NA(10k/R0603)
R34
1
10K/R0603
22R/R0603
R35
1
10R/R0603
NA(22R/R0603)
R36
1
220R/R0603
NA(R0603)
R37
1
12.1k/1%/R0603
R39
1
10K/R0603
2.2k/R0603
R40
1
1K/R0603
220R/R0603
R41
1
10R/R0603
22R/R0603
R43

ESP32-EVB Rev A design files

The KiCad project lives in the fso-dev-man/ESP32-EVB-Board repository on GitHub; these links point at the commit this page was built from.

ESP32-EVB Rev A: common questions

What microcontroller does the ESP32-EVB Rev A use?

The ESP32-EVB Rev A is built around the ESP32-WROOM-32E-N4, from the ESP32 family.

How big is the ESP32-EVB Rev A PCB?

The ESP32-EVB Rev A measures 75 × 57.2 mm, has 4 copper layers and is 1.5 mm thick.

How many components are on the ESP32-EVB Rev A?

105 components, from 65 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32-EVB Rev A design files?

From the fso-dev-man/ESP32-EVB-Board repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the ESP32-EVB Rev A design in my own project?

Yes, under the terms of its Apache-2.0 license, which fso-dev-man chose for the repository.

Can I test firmware for the ESP32-EVB Rev A without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in ESP32-EVB-Board

Similar boards