ESP32-EVB Rev K1
fso-dev-man·ESP32-EVB-Board·HARDWARE/REV-K1/ESP32-EVB_Rev_K1.kicad_pcb
About the ESP32-EVB Rev K1 PCB
ESP32-EVB Rev K1 is an open source ESP32 PCB design by fso-dev-man, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 75.2 × 74.7 mm, with 157 components from 75 distinct parts.
Its main chip is the ESP32-WROOM-32E-N4, from the ESP32 family. Other key parts include the TP4054-42-SOT25-R, SY8089AAAC(SOT23-5), LAN8710A-EZC(QFN32), CH340T(SSOP20W) and SIT1050T(SOIC-8_150mil). By type, the board carries 58 resistors, 32 capacitors, 11 ICs, 10 diodes, 6 transistors and 5 LEDs.
It belongs with the power & battery designs in this gallery.
From the project
- revision A - internal, not released - revision B - initial public release - revision C - changes:
- revision A - internal, not released - revision B - initial public release - revision C - changes:
1. MicroUSB connector moved back, 40 mils to the middle of the board. 2. All mounting holes are now connected to GND. 3. Improved the ground layer around the infra red's pads and wires.
1. Changed R38 from 10k/0603 to 100k/0603 to lower the time without clock 2. Changed C28 from 100n/0603 to 10n/0603 to increase the time in reset
Main components on the ESP32-EVB Rev K1
ESP32-EVB Rev K1 bill of materials (BOM)
157 components, 75 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4054-42-SOT25-R BL4054B-42TPRN(SOT23-5) | SOT-23-5 | U1 |
| 1 | SY8089AAAC(SOT23-5) | SOT-23-5 | U2 |
| 1 | ESP32-WROOM-32E-N4 ESP-WROOM-32 | ESP-WROOM-32_MODULE | U3 |
| 1 | LAN8710A-EZC(QFN32) | QFN32_EP(33)_5.00x5.00x0.90mm_Pitch_0.50mm | U4 |
| 1 | CH340T(SSOP20W) | SSOP-20W | U5 |
| 1 | SIT1050T(SOIC-8_150mil) | SOIC-8_150mil | U6 |
| 1 | VS1838B | RPM7236-H8 | U7 |
| 1 | NA(NCP303LSN27T1G(SOT-23-5)) | SOT-23-5 | U8 |
| 2 | BAT54C(SOT23-3) | SOT23-3 | U9, U10 |
| 1 | HX7027(SOT-23) | SOT-23 | U11 |
| 5 | BC817-40(SOT23) | SOT23 | Q1, Q2, Q4, Q5, Q7 |
| 1 | Q12MHZ/2P/20PPM/20PF/HU49SM Q12MHz/20pF/30ppm/2P/HC-49SM(SMD) | Q_49U3HMS | Q3 |
| 2 | DG306-5.0-3P TB3-DG306-5.0-3P | TB3-DG306-5.0_3P | CON1, CON2 |
| 1 | Closed(1-2)/Opened(2-3) | SJ_2_SMALL_12_TIED | 5.0V/3.3V1 |
| 1 | DW02R | LIPO_BAT-CON2DW02R | BAT1 |
| 1 | Opened(2-3)/Soldered(1-2) | SJ_2_SMALL | BAT/BUT1 |
| 2 | T1107A(6x3,8x2,5MM) | T1107A(6x3,8x2,5MM) | BUT1, RST1 |
| 1 | TB3-3.5mm | TB3-3.5mm | CAN1 |
| 2 | Opened | SJ | CAN_T1, PHY_RST1 |
| 1 | Q50MHZ/25PPM/3V/4P/5X3.2MM Q50MHz/25ppm/3V/4P/5x3.2mm | 5032-4P_HCX-3S | CR1 |
Show 55 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NA(HN2x20) | HN2x20 | EXT1 |
| 3 | WPM2015-3 WPM2015-3/TR | SOT23 | FET1, FET2, FET3 |
| 1 | BSS138 | SOT23 | FET4 |
| 1 | RJLD-060TC1(LPJ4013EDNL) | RJLBC-060TC1 | LAN1 |
| 2 | MOUNTING_HOLE_SHIELD_3.3MM Mounting_hole_Shield_3.3mm | Mounting_hole_Shield_3.3mm | MH2, MH3 |
| 1 | TFC-WXCP11-08-LF | TFC-WXCP11-08-LF | MICRO_SD1 |
| 1 | PWRJ-2mm(YDJ-1134) | PWRJ-2mm(YDJ-1136) | PWR1 |
| 1 | NA(TB2 DG306-5.0-2P) | TB2-DG306-5.0_2P | PWR2 |
| 2 | RAS-0515 | Relay_RAS-05-15 | REL1, REL2 |
| 3 | RA1206_(4X0603)_4B8_2.2k | R_MATRIX_4 | RM1, RM2, RM3 |
| 1 | ESDS314DBVR(SOT-23-5) | SOT-23-5 | TVS1 |
| 1 | BH10S | UEXT_ML10 | UEXT1 |
| 1 | MISB-SWMM-5B-LF(USB_MICRO) | USB-MICRO_MISB-SWMM-5B_LF | USB-UART1 |
| 1 | LED/YELLOW/0603 LED/Yellow/0603 | LED_0603_KA | CHARGE1 |
| 2 | LED/GREEN/0603 | LED_0603_KA | LED1, LED2 |
| 1 | LED/IR333-A/5MM LED/IR333-A/5mm | LED-5mm-PTH-AK | LED3 |
| 1 | LED/RED/0603 | LED_0603_KA | PWRLED1 |
| 6 | 1N5819S4(SOD-123) | SOD-123_1C-2A_KA | D1, D3, D5, D7, D8, D9 |
| 1 | SMBJ6.0A(DO-214AA) | DO214AA_1(K)-2(A) | D2 |
| 2 | 1N5822/SS34/SMA | SMA-KA | D4, D6 |
| 1 | BAT54A(SOT23-3) | SOT23-3 | D10 |
| 3 | 600R/2A/UPZ2012E-601-2R0TF FB0805/600R/2A | L_0805_5MIL_DWS | L1, L3, L4 |
| 1 | 2.2UH/NRS3015T2R2MNGH 2.2uH/1.5A/DCR=72mR/20%/3.00x3.00x1.50mm/CD32(NR3015T2R2M) | CD32 | L2 |
| 1 | NA(FB0805/600R/2A) | L_0805_5MIL_DWS | L5 |
| 2 | NA(47uF/6.3V/20%/X5R/C0805) | C_0805_5MIL_DWS | C1, C3 |
| 3 | 47uF/6.3V/20%/X5R/C0805 | C_0805_5MIL_DWS | C2, C4, C10 |
| 8 | 22uF/6.3V/20%/X5R/C0603 | C_0603_5MIL_DWS | C5, C6, C7, C8, C9, C12, C23, C29 |
| 9 | 100nF/50V/20%/Y5V/C0603 | C_0603_5MIL_DWS | C11, C13, C14, C15, C17, C24, C25, C27 +1 |
| 1 | 2.2uF/6.3V/10%/X5R/C0603 | C_0603_5MIL_DWS | C16 |
| 1 | 1nF/50V/5%/NPO(COG)/C0603 | C_0603_5MIL_DWS | C18 |
| 1 | 1nF/2000V/10%/X7R/C1206 | C_1206_5MIL_DWS_ISO | C19 |
| 1 | NA(1nF/2000V/10%/X7R/C1206) | C_1206_5MIL_DWS_ISO | C20 |
| 2 | 27pF/50V/5%/C0G/C0603 | C_0603_5MIL_DWS | C21, C22 |
| 1 | 10uF/6.3V/20%/X5R/C0603 | C_0603_5MIL_DWS | C26 |
| 1 | NA(470nF/16V/10%/X7R/C0603) | C_0603_5MIL_DWS | C28 |
| 2 | 1uF/10V/10%/X5R/C0603 | C_0603_5MIL_DWS | C31, C32 |
| 6 | 1K/R0603 1k/R0603 | R_0603_5MIL_DWS | R1, R5, R41, R42, R50, R55 |
| 15 | 10K/R0603 10k/R0603 | R_0603_5MIL_DWS | R2, R6, R22, R23, R24, R29, R30, R34 +7 |
| 6 | 2.2K/R0603 2.2k/R0603 | R_0603_5MIL_DWS | R3, R4, R7, R11, R18, R21 |
| 1 | 2k/1%/R0603 | R_0603_5MIL_DWS | R8 |
| 2 | 470K/R0603 470k/R0603 | R_0603_5MIL_DWS | R9, R10 |
| 6 | NA/R0603 | R_0603_5MIL_DWS | R12, R17, R44, R46, R48, R54 |
| 1 | 330R/R0603 | R_0603_5MIL_DWS | R13 |
| 5 | 220R/R0603 | R_0603_5MIL_DWS | R14, R16, R26, R27, R37 |
| 1 | 680R/R0603 | R_0603_5MIL_DWS | R15 |
| 1 | 220K/R0603 220k/R0603 | R_0603_5MIL_DWS | R19 |
| 1 | 49.9k/1%/R0603 | R_0603_5MIL_DWS | R20 |
| 1 | 0R(board_mounted) | 0R_0603 | R25 |
| 5 | 49.9R/1%/R0402 | R_0402_5MIL_DWS | R28, R31, R32, R33, R58 |
| 2 | 10R/R0603 | R_0603_5MIL_DWS | R36, R43 |
| 1 | 12.1k/1%/R0603 | R_0603_5MIL_DWS | R39 |
| 1 | 120R/R1206 | R_1206_5MIL_DWS | R47 |
| 1 | 100K/R0603 100k/R0603 | R_0603_5MIL_DWS | R52 |
| 1 | 6.8R/R1206 | R_1206_5MIL_DWS | R53 |
| 1 | NA(1k/R0603) | R_0603_5MIL_DWS | R57 |
ESP32-EVB Rev K1 design files
The KiCad project lives in the fso-dev-man/ESP32-EVB-Board repository on GitHub; these links point at the commit this page was built from.
ESP32-EVB Rev K1: common questions
What microcontroller does the ESP32-EVB Rev K1 use?
The ESP32-EVB Rev K1 is built around the ESP32-WROOM-32E-N4, from the ESP32 family.
How big is the ESP32-EVB Rev K1 PCB?
The ESP32-EVB Rev K1 measures 75.2 × 74.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-EVB Rev K1?
157 components, from 75 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-EVB Rev K1 design files?
From the fso-dev-man/ESP32-EVB-Board repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ESP32-EVB Rev K1 design in my own project?
Yes, under the terms of its Apache-2.0 license, which fso-dev-man chose for the repository.
Can I test firmware for the ESP32-EVB Rev K1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ESP32-EVB-Board
ESP32
ESP32-EVB Rev K
fso-dev-man
75.2 × 74.7 mm157 parts2LApache-2.00ESP32
ESP32-EVB Rev J
fso-dev-man
75.2 × 74.7 mm157 parts2LApache-2.00ESP32
ESP32-EVB Rev K2
fso-dev-man
75.2 × 74.7 mm157 parts2LApache-2.00ESP32
ESP32-EVB Rev L
fso-dev-man
75.2 × 74.7 mm156 parts2LApache-2.00ESP32
ESP32-EVB Rev F
fso-dev-man
75.2 × 74.7 mm147 parts2LApache-2.00ESP32
ESP32-EVB Rev I
fso-dev-man
75.2 × 74.7 mm146 parts2LApache-2.00ESP32
ESP32-EVB Rev D
fso-dev-man
75.2 × 74.7 mm145 parts2LApache-2.00ESP32
ESP32-EVB Rev H
fso-dev-man
75.2 × 74.7 mm145 parts2LApache-2.00ESP32
ESP32-EVB Rev C
fso-dev-man
75.2 × 74.7 mm143 parts2LApache-2.00ESP32
ESP32-EVB Rev B
fso-dev-man
75.2 × 74.7 mm143 parts2LApache-2.00ESP32
ESP32-EVB Rev A
fso-dev-man
75 × 57.2 mm105 parts4LApache-2.00
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k