85 open source boards using the LAN8710A-EZC(QFN32)

Real designs built with the LAN8710A-EZC(QFN32), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

85 boardsClear filters|Most starred

How designs wire the LAN8710A-EZC(QFN32)

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the LAN8710A-EZC(QFN32) connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD2A pin has a series resistor on 13 of 13 designs, most often 49.9 Ω (then 0 Ω).
  • The VDDCR pin has a capacitor to GND on 13 of 13 designs, most often 100 nF (then 2.2 µF).
  • The NRST pin has a pull-up to 3.3V on 13 of 13 designs, most often 10 kΩ.
  • The NRST pin has a capacitor to GND on 13 of 13 designs, most often 10 µF (then 1 nF).
VDD2Apin 1Connected to: A connector 54%
  • Series resistor on 100% · 49.9 Ω (43), 0 Ω (5)
  • Capacitor to GND on 85% · 100 nF (18), 22 µF (4)
  • Inductor on 62%
XTAL2pin 4Connected to: Not connected 100%
XTAL1/CLKINpin 5Connected to: The microcontroller 85%
  • Series resistor on 31% · 22 Ω (2), 10 Ω (2)
VDDCRpin 6Connected to: Signal 69% · VDDCR 31%
  • Capacitor to GND on 100% · 100 nF (13), 2.2 µF (13)
VDDIOpin 12Connected to: 3.3V 100%
  • Decoupling capacitor on 85% · 100 nF (11)
CRSpin 14Connected to: Not connected 100%
NINT/TXER/TXD4pin 18Connected to: Not connected 85% · a signal 15%
NRSTpin 19Connected to: Signal 100%
  • Pull-up to 3.3V on 100% · 10 kΩ (13)
  • Capacitor to GND on 100% · 10 µF (3), 1 nF (1)
TXCLKpin 20Connected to: Not connected 100%
TXD2pin 24Connected to: GND 100%
TXD3pin 25Connected to: GND 100%
RXDVpin 26Connected to: Not connected 100%
VDD1Apin 27Connected to: A connector 54%
  • Capacitor to GND on 100% · 100 nF (15), 22 µF (4)
  • Series resistor on 100% · 49.9 Ω (48), 2.2 kΩ (6), 0 Ω (2)
TXNpin 28Connected to: A connector 100%
  • Series resistor on 100% · 49.9 Ω (13)
TXPpin 29Connected to: A connector 100%
  • Series resistor on 100% · 49.9 Ω (13)
RXNpin 30Connected to: A connector 100%
  • Series resistor on 100% · 49.9 Ω (13)
RXPpin 31Connected to: A connector 100%
  • Series resistor on 100% · 49.9 Ω (13)
RBIASpin 32Connected to: Signal 100%
  • Resistor to GND on 100% · 12.1 kΩ (13)
GNDpin 33Connected to: GND 100%

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-PoE Rev C by OLIMEX, ESP32-EVB Rev A by OLIMEX, ESP32-PoE-ISO Rev B by OLIMEX and ESP32-PoE by BhoumikAcharya.

The LAN8710A-EZC(QFN32) in open source designs

The gallery holds 85 open source boards using the LAN8710A-EZC(QFN32) from 14 GitHub repositories; a typical one measures about 28 × 75 mm and carries around 129 components.

56% are two-layer designs, the rest use four layers or more, and 58% carry an open source license.

The most starred is ESP32-PoE Rev L by OLIMEX.

Microcontrollers on boards using the LAN8710A-EZC(QFN32)

What boards using the LAN8710A-EZC(QFN32) are built for

LAN8710A-EZC(QFN32): common questions

Where can I find a LAN8710A-EZC(QFN32) reference design?

Each of the 85 boards on this page is a real design using the LAN8710A-EZC(QFN32). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LAN8710A-EZC(QFN32) VDD2A pin?

The VDD2A pin has a series resistor on 13 of 13 designs, most often 49.9 Ω (then 0 Ω). Counted from the KiCad layouts of 13 open source designs using the LAN8710A-EZC(QFN32).

How is the LAN8710A-EZC(QFN32) VDDCR pin connected?

The VDDCR pin has a capacitor to GND on 13 of 13 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 13 open source designs using the LAN8710A-EZC(QFN32).

What pull-up resistor is used on the LAN8710A-EZC(QFN32) NRST pin?

The NRST pin has a pull-up to 3.3V on 13 of 13 designs, most often 10 kΩ. Counted from the KiCad layouts of 13 open source designs using the LAN8710A-EZC(QFN32).

What parts are used alongside the LAN8710A-EZC(QFN32)?

The CH340T(SSOP20W), SY8089AAAC(SOT23-5), BL4054B-42TPRN(SOT23-5), ESP-WROOM-32 and CH340X(MSOP-10) appear in the most repositories here.

Which microcontrollers do boards using the LAN8710A-EZC(QFN32) use?

Most are built on ESP32 (85).

How big is a typical board using the LAN8710A-EZC(QFN32)?

The median is 28 × 75 mm, and 56% are two-layer designs.

What is the most popular open source board using the LAN8710A-EZC(QFN32)?

By GitHub stars, ESP32-PoE Rev L by OLIMEX, with 407 stars.

Can I simulate one of these boards using the LAN8710A-EZC(QFN32) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part