ESP32-PoE-ISO Rev D
fso-dev-man·ESP32-POE-Board·HARDWARE/ESP32-PoE-ISO-Rev.D/ESP32-PoE-ISO_Rev_D.kicad_pcb
About the ESP32-PoE-ISO Rev D PCB
ESP32-PoE-ISO Rev D is an open source ESP32 PCB design by fso-dev-man, published on GitHub. It is a 4-layer board measuring 28 × 93 mm, with 117 components from 64 distinct parts.
Its main chip is the ESP32-WROOM-32D-4MB, from the ESP32 family. Other key parts include the CH340T(SSOP20W), BL4054B-42TPRN(SOT23-5), LAN8710A-EZC(QFN32), SY8089AAAC(SOT23-5) and Si3402-B-GM(QFN-20_5x5mm). By type, the board carries 44 resistors, 31 capacitors, 7 diodes, 6 ICs, 6 inductors and 4 LEDs.
It belongs with the iot & wireless, power & battery and sensors designs in this gallery.
From the project
ESP32-PoE-ISO is an ESP32-powered WiFi/BLE/Ethernet development board with Power-Over-Ethernet feature. The PoE is handled by the TPS2375PW chip, which is IEEE 802.3af-compliant including pre-standard (legacy) PoE support. The PoE powering requires at least 37V DC to operate. ESP
ESP32-PoE-ISO is an ESP32-powered WiFi/BLE/Ethernet development board with Power-Over-Ethernet feature. The PoE is handled by the TPS2375PW chip, which is IEEE 802.3af-compliant including pre-standard (legacy) PoE support. The PoE powering requires at least 37V DC to operate. ESP32-POE-ISO has 3000VDC galvanic insulation between the PoE Ethernet part and the board's power supply circuit. Perfect solution for Internet-of-Things projects that can be expanded with sensors and actuators taking power from Ethernet cable.
Main components on the ESP32-PoE-ISO Rev D
ESP32-PoE-ISO Rev D bill of materials (BOM)
117 components, 64 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH340T(SSOP20W) | SSOP-20W | U1 |
| 1 | BL4054B-42TPRN(SOT23-5) | SOT-23-5 | U3 |
| 1 | LAN8710A-EZC(QFN32) | QFN32_EP(33)_5.00x5.00x0.90mm_Pitch_0.50mm | U4 |
| 1 | SY8089AAAC(SOT23-5) | SOT-23-5 | U7 |
| 1 | Si3402-B-GM(QFN-20_5x5mm) | QFN-20_5x5mm(Si3402-B-GM) | U8 |
| 1 | ESP32-WROOM-32D-4MB | ESP-WROOM-32_MODULE | U9 |
| 1 | Q12MHz/20pF/10ppm/4P/3.2x2.5mm | TSX-3.2x2.5mm_GND(3) | Q1 |
| 2 | BC817-40(SOT23) | SOT23 | Q2, Q3 |
| 1 | DW02S DW02R | LIPO_BAT-CON2DW02R | BAT1 |
| 2 | IT1185AU2 | IT1185AU2_V2 | BUT1, RST1 |
| 1 | F0505S-2WR2(SIP-7) | SIP-7_Universal | DCDC1 |
| 2 | NS(HN1x10) | HN1x10 | EXT1, EXT2 |
| 3 | IRLML6402TRPBF WPM2015-3/TR | SOT23 | FET1, FET2, FET3 |
| 1 | TFC-9P-1.7H(ATFFS150A01BR016) | uSD(TFC-9P-1.xH(ATFFS150A01BR016)) | MICRO_SD1 |
| 3 | RA1206_(4X0603)_4B8_2.2k | R_MATRIX_4 | RM1, RM2, RM3 |
| 1 | DTC114YKA(SOT-23) | SOT23 | T1 |
| 1 | P-B-V-10-LF | GBH-254-SMT-10 | UEXT1 |
| 1 | MISB-SWMM-5B-LF(USB_MICRO) | USB-MICRO_MISB-SWMM-5B_LF | USB-UART1 |
| 2 | LED/YELLOW/0603 | LED_0603_KA | ACT1, CHRG1 |
| 1 | LED/GREEN/0603 | LED_0603_KA | LNK1 |
Show 44 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED/RED/0603 | LED_0603_KA | PWR1 |
| 4 | 1N5819S4/SOD123 | SOD-123_1C-2A_KA | D1, D3, D6, D7 |
| 1 | BAT54C(SOT23-3) | SOT23-3 | D2 |
| 1 | 1N5819S4/SOD123 1N5819S4/SOD-123 | SOD-123_1C-2A_KA | D4 |
| 1 | SS510/100V/5A/0.85V/DO214AB(SMC) | DO214AB(SMC)_1(K)-2(A) | D5 |
| 3 | FB0805/600R/2A | L_0805_5MIL_DWS | L1, L3, L5 |
| 1 | 2.2uH/1.5A/DCR=72mR/20%/3.00x3.00x1.50mm/CD32(NR3015T2R2M) | CD32 | L2 |
| 1 | 33uH/2.1A/DCR=0.1R/20%/DBS135(PD3316MT330) | DBS135 | L4 |
| 1 | FB0805/600R/2A | L_0805_5MIL_DWS | L6 |
| 9 | 22uF/6.3V/20%/X5R/C0603 | C_0603_5MIL_DWS | C1, C6, C7, C9, C10, C13, C19, C22 +1 |
| 1 | 1nF/2000V/10%/X7R/C1206 | C_1206_5MIL_DWS_ISO | C2 |
| 1 | 47uF/6.3V/20%/X5R/C0805 | C_0805_5MIL_DWS | C3 |
| 2 | 27pF/50V/5%/C0G/C0402 | C_0402_5MIL_DWS | C4, C5 |
| 7 | 100nF/16V/10%/X7R/C0402 | C_0402_5MIL_DWS | C8, C11, C14, C15, C16, C18, C25 |
| 1 | 2.2uF/100V/20%/X7R/C1206(AVX_12061C225KAT2A_Comet) | C_1206_5MIL_DWS_ISO | C12 |
| 1 | 2.2uF/6.3V/10%/X5R/C0603 | C_0603_5MIL_DWS | C17 |
| 2 | 1.0nF/3kV/10%/X7R/SMD/1808(VISHAY-VJ1808Y102KBHAT4X_Farnell-2407291) | C_1808(4520)_5MIL_DWS_ISO | C20, C23 |
| 1 | NA(10uF/6.3V/20%/X5R/C0603) | C_0603_5MIL_DWS | C21 |
| 1 | 100nF/100V/20%/C1206 | C_1206_5MIL_DWS | C24 |
| 2 | 1nF/50V/10%/X7R/C0402 | C_0402_5MIL_DWS | C26, C28 |
| 1 | 15uF/100V/20%/RM2.5/6.3x11mm(Farnell:1281844) | CPOL-RM2.5mm_6.3x11mm_PTH | C27 |
| 1 | 680uF/10V/20%/105C/RM3.5/8x11.5mm | CPOL-RM3.5mm_8.0x11.5mm_PTH | C29 |
| 1 | 1uF/10V/20%/X5R/C0603 | C_0603_5MIL_DWS | C31 |
| 11 | 10K/R0402 10k/R0402 | R_0402_5MIL_DWS | R1, R2, R6, R18, R19, R25, R32, R36 +3 |
| 3 | 1K/R0402 1k/R0402 | R_0402_5MIL_DWS | R3, R20, R21 |
| 1 | 47K/R0402 47k/R0402 | R_0402_5MIL_DWS | R4 |
| 6 | 2.2K/R0402 2.2k/R0402 | R_0402_5MIL_DWS | R5, R8, R14, R15, R31, R35 |
| 2 | 470K/R0402 470k/R0402 | R_0402_5MIL_DWS | R7, R16 |
| 1 | 100K/R0402 100k/R0402 | R_0402_5MIL_DWS | R9 |
| 4 | 49.9R/1%/R0402 | R_0402_5MIL_DWS | R10, R11, R12, R13 |
| 1 | NA/R0402 NA | R_0402_5MIL_DWS | R17 |
| 3 | 220R/R0402 | R_0402_5MIL_DWS | R24, R46, R47 |
| 1 | 12.1k/1%/R0402 | R_0402_5MIL_DWS | R26 |
| 1 | 220K/R0402 220k/R0402 | R_0402_5MIL_DWS | R29 |
| 1 | 49.9k/1%/R0402 | R_0402_5MIL_DWS | R30 |
| 1 | 4.7R/R0402 47k/R0402 | R_0402_5MIL_DWS | R33 |
| 1 | NA(49.9R/1%/R0402) | R_0402_5MIL_DWS | R34 |
| 1 | 25.5k/1%/R0603 | R_0603_5MIL_DWS | R38 |
| 1 | 10R/R0402 | R_0402_5MIL_DWS | R40 |
| 1 | 9.1K/1W/R2512 1.05k/1%/R0402 | R_0402_5MIL_DWS | R41 |
| 1 | 3.01k/1%/R0402 | R_0402_5MIL_DWS | R42 |
| 1 | 4.7K/R0402 220R/5%/0.25W/R1206 | R_1206_5MIL_DWS | R43 |
| 1 | 220R/5%/0.25W/R1206 | R_1206_5MIL_DWS | R45 |
| 1 | NA/R0402 | R_0402_5MIL_DWS | R49 |
ESP32-PoE-ISO Rev D design files
The KiCad project lives in the fso-dev-man/ESP32-POE-Board repository on GitHub; these links point at the commit this page was built from.
ESP32-PoE-ISO Rev D: common questions
What microcontroller does the ESP32-PoE-ISO Rev D use?
The ESP32-PoE-ISO Rev D is built around the ESP32-WROOM-32D-4MB, from the ESP32 family.
How big is the ESP32-PoE-ISO Rev D PCB?
The ESP32-PoE-ISO Rev D measures 28 × 93 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ESP32-PoE-ISO Rev D?
117 components, from 64 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-PoE-ISO Rev D design files?
From the fso-dev-man/ESP32-POE-Board repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the ESP32-PoE-ISO Rev D design in my own project?
The repository has no license, so all rights stay with fso-dev-man. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-PoE-ISO Rev D without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in ESP32-POE-Board
ESP32
ESP32-PoE-ISO Rev K
fso-dev-man
28 × 98.2 mm130 parts4LNo license0ESP32
ESP32-PoE-ISO Rev N
fso-dev-man
28 × 98.2 mm130 parts4LNo license0ESP32
ESP32-PoE-ISO Rev L
fso-dev-man
28 × 98.2 mm130 parts4LNo license0ESP32
ESP32-PoE-ISO Rev M1
fso-dev-man
28 × 98.2 mm129 parts4LNo license0ESP32
ESP32-PoE-ISO Rev M
fso-dev-man
28 × 98.2 mm128 parts4LNo license0ESP32
ESP32-PoE-ISO Rev J
fso-dev-man
28 × 98.2 mm128 parts4LNo license0ESP32
ESP32-PoE-ISO Rev H
fso-dev-man
28 × 93 mm122 parts4LNo license0ESP32
ESP32-PoE-ISO Rev I
fso-dev-man
28 × 93 mm122 parts4LNo license0ESP32
ESP32-PoE-ISO Rev G1
fso-dev-man
28 × 93 mm121 parts4LNo license0ESP32
ESP32-PoE-ISO Rev B
fso-dev-man
28 × 93 mm117 parts4LNo license0ESP32
ESP32-PoE-ISO Rev C
fso-dev-man
28 × 93 mm116 parts4LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k