51 open source boards using the BL4054B-42TPRN(SOT23-5)
Real designs built with the BL4054B-42TPRN(SOT23-5), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-PoE Rev K
OLIMEX
28 × 80 mm131 parts4LApache-2.0407RP2040/RP2350
AgonLight2 Rev A
OLIMEX
106.1 × 64.9 mm237 parts4LGPL-3.0105ESP32
ESP32-DevKit-Lipo Rev C
OLIMEX
27.9 × 48.3 mm48 parts2LApache-2.098ESP32
ESP32-S3-DevKit-LiPo Rev B
OLIMEX
27.9 × 55.9 mm55 parts2LGPL-3.040NB-IoT-DevKit Rev B
OLIMEX
25.4 × 40.6 mm105 parts4LGPL-3.036ESP32
ESP32-SBC-FabGL Rev A
OLIMEX
104 × 68 mm112 parts2LGPL-3.029ESP32
ESP32-S2-DevKit-LiPo-USB
OLIMEX
27.9 × 53.3 mm66 parts2LGPL-3.020ESP32
ESP32-S2-DevKit-LiPo
OLIMEX
27.9 × 53.3 mm76 parts2LAGPL-3.019RP2040/RP2350
RP2040pc
OLIMEX
80 × 65 mm159 parts4LMIT11ESP32
ESP32-PoE Rev D
frankshieh
28 × 75 mm116 parts2LApache-2.01ESP32
Himinds boosting innovation embedded env sensor hw
HiMinds
79 × 79 mm86 parts2LApache-2.01ESP32
Uplink
JimothyJohn
28 × 98.2 mm130 parts4LMIT0ESP32
ESP32-PoE-ISO Rev K
fso-dev-man
28 × 98.2 mm130 parts4LNo license0ESP32
Schemantic
ashutosh-rath02
28 × 80 mm129 parts4LMIT0ESP32
B52E
OS-Q
28 × 75 mm117 parts2LNo license0ESP32
ESP32-PoE-rev-E
crazyelectron-io
28 × 75 mm117 parts2LNo license0ESP32
ESP32-PoE Rev L
OLIMEX
28 × 80 mm131 parts4LApache-2.0407ESP32
ESP32-PoE-ISO Rev K
OLIMEX
28 × 98.2 mm130 parts4LNo license145RP2040/RP2350
AgonLight2
OLIMEX
106.1 × 64.9 mm237 parts4LGPL-3.0105ESP32
ESP32-DevKit-Lipo Rev B
OLIMEX
27.9 × 48.3 mm47 parts2LApache-2.098ESP32
ESP32-S3-DevKit-LiPo Rev B DIMM
OLIMEX
27.9 × 55.9 mm55 parts2LGPL-3.040NB-IoT-DevKit Rev C
OLIMEX
25.4 × 40.6 mm105 parts4LGPL-3.036ESP32
ESP32-SBC-FabGL Rev B
OLIMEX
104 × 68 mm112 parts2LGPL-3.029RISC-V
Neo6502PC-PWR
OLIMEX
46 × 75 mm64 parts2LGPL-3.011ESP32
ESP32-PoE-ISO Rev L
fso-dev-man
28 × 98.2 mm130 parts4LNo license0ESP32
ESP32-PoE Rev L1
OLIMEX
28 × 80 mm131 parts4LApache-2.0407ESP32
ESP32-PoE-ISO Rev L
OLIMEX
28 × 98.2 mm130 parts4LNo license145ESP32
ESP32-DevKit-Lipo Rev D
OLIMEX
27.9 × 48.3 mm46 parts2LApache-2.098RP2040-PICO-PC rev B
OLIMEX
70 × 38.5 mm57 parts2LGPL-3.041NB-IoT-DevKit Rev D
OLIMEX
25.4 × 40.6 mm105 parts4LGPL-3.036ESP32
ESP32-DevKit-Lipo Rev A1
OLIMEX
27.9 × 48.3 mm40 parts2LApache-2.098ESP32
ESP32-PoE Rev C
frankshieh
28 × 75 mm110 parts2LApache-2.01ESP32
ESP32-PoE-ISO Rev J
fso-dev-man
28 × 98.2 mm128 parts4LNo license0ESP32
ESP32-PoE-ISO Rev J
OLIMEX
28 × 98.2 mm128 parts4LNo license145ESP32
ESP32-PoE Rev J
OLIMEX
28 × 80 mm129 parts4LApache-2.0407ESP32
ESP32-PoE-ISO Rev H
fso-dev-man
28 × 93 mm122 parts4LNo license0
How designs wire the BL4054B-42TPRN(SOT23-5)
Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the BL4054B-42TPRN(SOT23-5) connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 19 of 19 designs, most often 22 µF (then 47 µF).
- The PROG pin has a resistor to GND on 19 of 19 designs, most often 2.2 kΩ (then 10 kΩ).
- The CHRGB pin has a series resistor on 18 of 19 designs, most often 2.2 kΩ (then 2 kΩ).
- The VBAT pin has a series resistor on 8 of 19 designs, most often 470 kΩ (then 10 mΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CHRGBpin 1 | Connected to: Signal 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| VBATpin 3 | Connected to: A connector 47% · VBAT 47% |
|
| VCCpin 4 | Connected to: 5V 100% |
|
| PROGpin 5 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-PoE Rev C by OLIMEX, ESP32-PoE-ISO Rev B by OLIMEX, AgonLight2 Rev A by OLIMEX and ESP32-DevKit-Lipo Rev A1 by OLIMEX.
The BL4054B-42TPRN(SOT23-5) in open source designs
The gallery holds 51 open source boards using the BL4054B-42TPRN(SOT23-5) from 19 GitHub repositories; a typical one measures about 28 × 75 mm and carries around 117 components.
59% use four copper layers or more, and 63% carry an open source license.
The most starred is ESP32-PoE Rev L by OLIMEX.
Parts used alongside the BL4054B-42TPRN(SOT23-5)
Microcontrollers on boards using the BL4054B-42TPRN(SOT23-5)
What boards using the BL4054B-42TPRN(SOT23-5) are built for
BL4054B-42TPRN(SOT23-5): common questions
Where can I find a BL4054B-42TPRN(SOT23-5) reference design?
Each of the 51 boards on this page is a real design using the BL4054B-42TPRN(SOT23-5). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the BL4054B-42TPRN(SOT23-5) VCC pin?
The VCC pin has a decoupling capacitor on 19 of 19 designs, most often 22 µF (then 47 µF). Counted from the KiCad layouts of 19 open source designs using the BL4054B-42TPRN(SOT23-5).
What resistor goes on the BL4054B-42TPRN(SOT23-5) PROG pin?
The PROG pin has a resistor to GND on 19 of 19 designs, most often 2.2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 19 open source designs using the BL4054B-42TPRN(SOT23-5).
What resistor goes on the BL4054B-42TPRN(SOT23-5) CHRGB pin?
The CHRGB pin has a series resistor on 18 of 19 designs, most often 2.2 kΩ (then 2 kΩ). Counted from the KiCad layouts of 19 open source designs using the BL4054B-42TPRN(SOT23-5).
What parts are used alongside the BL4054B-42TPRN(SOT23-5)?
The SY8089AAAC(SOT23-5), CH340T(SSOP20W), ESP-WROOM-32, LAN8710A-EZC(QFN32) and Si3402-B-GM(QFN-20_5x5mm) appear in the most repositories here.
Which microcontrollers do boards using the BL4054B-42TPRN(SOT23-5) use?
Most are built on ESP32 (43), RP2040/RP2350 (3) and RISC-V (1).
How big is a typical board using the BL4054B-42TPRN(SOT23-5)?
The median is 28 × 75 mm, and 41% are two-layer designs.
What is the most popular open source board using the BL4054B-42TPRN(SOT23-5)?
By GitHub stars, ESP32-PoE Rev L by OLIMEX, with 407 stars.
Can I simulate one of these boards using the BL4054B-42TPRN(SOT23-5) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.