80 open source boards using the CH340T(SSOP20W)

Real designs built with the CH340T(SSOP20W), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

80 boardsClear filters|Most starred

How designs wire the CH340T(SSOP20W)

Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the CH340T(SSOP20W) connects to, and the resistors, capacitors and other passives placed on it.

  • The V3 pin has a capacitor to GND on 19 of 19 designs, most often 100 nF.
  • The XI pin has a capacitor to GND on 19 of 19 designs, most often 27 pF (then 22 pF).
  • The XO pin has a capacitor to GND on 19 of 19 designs, most often 27 pF (then 22 pF).
  • The DTR# pin has a series resistor on 19 of 19 designs, most often 1 kΩ (then 2.2 kΩ).
Pin 1Connected to: Not connected 100%
Pin 2Connected to: Not connected 100%
TXDpin 3Connected to: Signal 100%
  • Series resistor on 42% · 220 Ω (8)
RXDpin 4Connected to: Signal 100%
  • Pull-up to 5V on 58% · 10 kΩ (10), 4.7 kΩ (1)
  • Series resistor on 42% · 220 Ω (8)
V3pin 5Connected to: Signal 53% · 3.3V 47%
  • Capacitor to GND on 100% · 100 nF (19)
  • Series resistor on 53% · 10 kΩ (10)
GNDpin 8Connected to: GND 100%
XIpin 9Connected to: Signal 100%
  • Capacitor to GND on 100% · 27 pF (17), 22 pF (2)
XOpin 10Connected to: Signal 100%
  • Capacitor to GND on 100% · 27 pF (17), 22 pF (2)
CTS#pin 11Connected to: Not connected 100%
DSR#pin 12Connected to: Not connected 100%
RI#pin 13Connected to: Not connected 100%
DCD#pin 14Connected to: Not connected 100%
DTR#pin 15Connected to: Signal 100%
  • Series resistor on 100% · 1 kΩ (14), 2.2 kΩ (2), 10 kΩ (2)
RTS#pin 16Connected to: Signal 100%
  • Series resistor on 100% · 1 kΩ (14), 2.2 kΩ (2), 10 kΩ (2)
IR#pin 17Connected to: Not connected 100%
Pin 18Connected to: Not connected 100%
VCCpin 19Connected to: 5V 100%
  • Decoupling capacitor on 100% · 22 µF (17), 100 nF (2), 10 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-PoE Rev C by OLIMEX, ESP32-GATEWAY Rev A by OLIMEX, ESP32-EVB Rev B by OLIMEX and ESP32-PoE-ISO Rev B by OLIMEX.

The CH340T(SSOP20W) in open source designs

The gallery holds 80 open source boards using the CH340T(SSOP20W) from 19 GitHub repositories; a typical one measures about 28 × 74.7 mm and carries around 122 components.

61% are two-layer designs, the rest use four layers or more, and 65% carry an open source license.

The most starred is ESP32-PoE Rev L by OLIMEX.

Microcontrollers on boards using the CH340T(SSOP20W)

CH340T(SSOP20W): common questions

Where can I find a CH340T(SSOP20W) reference design?

Each of the 80 boards on this page is a real design using the CH340T(SSOP20W). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the CH340T(SSOP20W) V3 pin connected?

The V3 pin has a capacitor to GND on 19 of 19 designs, most often 100 nF. Counted from the KiCad layouts of 19 open source designs using the CH340T(SSOP20W).

How is the CH340T(SSOP20W) XI pin connected?

The XI pin has a capacitor to GND on 19 of 19 designs, most often 27 pF (then 22 pF). Counted from the KiCad layouts of 19 open source designs using the CH340T(SSOP20W).

How is the CH340T(SSOP20W) XO pin connected?

The XO pin has a capacitor to GND on 19 of 19 designs, most often 27 pF (then 22 pF). Counted from the KiCad layouts of 19 open source designs using the CH340T(SSOP20W).

What parts are used alongside the CH340T(SSOP20W)?

The SY8089AAAC(SOT23-5), BL4054B-42TPRN(SOT23-5), LAN8710A-EZC(QFN32), ESP-WROOM-32 and BAT54C(SOT23-3) appear in the most repositories here.

Which microcontrollers do boards using the CH340T(SSOP20W) use?

Most are built on ESP32 (75) and RP2040/RP2350 (2).

How big is a typical board using the CH340T(SSOP20W)?

The median is 28 × 74.7 mm, and 61% are two-layer designs.

What is the most popular open source board using the CH340T(SSOP20W)?

By GitHub stars, ESP32-PoE Rev L by OLIMEX, with 407 stars.

Can I simulate one of these boards using the CH340T(SSOP20W) before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part