17 open source boards using the ESP32-WROOM-32D-4MB
Real designs built with the ESP32-WROOM-32D-4MB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
ESP32-DevKit-Lipo Rev C
OLIMEX
27.9 × 48.3 mm48 parts2LApache-2.098ESP32
ESP32-GATEWAY Rev F
guydmi
50.8 × 62.2 mm89 parts2LNo license0ESP32
ESP32-DevKit-Lipo Rev B
OLIMEX
27.9 × 48.3 mm47 parts2LApache-2.098ESP32
ESP32-GATEWAY Rev G
guydmi
50.8 × 62.2 mm89 parts2LNo license0ESP32
ESP32-GATEWAY Rev F
OLIMEX
50.8 × 62.2 mm89 parts2LApache-2.0320ESP32
ESP32-DevKit-Lipo Rev D
OLIMEX
27.9 × 48.3 mm46 parts2LApache-2.098ESP32
ESP32-GATEWAY Rev G
OLIMEX
50.8 × 62.2 mm89 parts2LApache-2.0320ESP32
ESP32-DevKit-Lipo
rompasaurus
27.9 × 48.3 mm47 parts2LNo license2ESP32
ESP32-PoE-ISO Rev H
fso-dev-man
28 × 93 mm122 parts4LNo license0ESP32
ESP32-PoE-ISO Rev H
OLIMEX
28 × 93 mm122 parts4LNo license145ESP32
ESP32-PoE-ISO Rev I
fso-dev-man
28 × 93 mm122 parts4LNo license0ESP32
ESP32-PoE-ISO Rev I
OLIMEX
28 × 93 mm122 parts4LNo license145ESP32
ESP32-PoE-ISO Rev G1
fso-dev-man
28 × 93 mm121 parts4LNo license0ESP32
ESP32-PoE-ISO Rev G1
OLIMEX
28 × 93 mm121 parts4LNo license145ESP32
ESP32-PoE-ISO Rev D
fso-dev-man
28 × 93 mm117 parts4LNo license0ESP32
ESP32-PoE-ISO Rev C
OLIMEX
28 × 93 mm116 parts4LNo license145ESP32
ESP32-PoE-ISO Rev C
fso-dev-man
28 × 93 mm116 parts4LNo license0
How designs wire the ESP32-WROOM-32D-4MB
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-WROOM-32D-4MB connects to, and the resistors, capacitors and other passives placed on it.
- Pin 3 has a pull-up to 3.3V on 5 of 5 designs, most often 470 kΩ (then 1 MΩ).
- Pin 34 has a series resistor on 5 of 5 designs, most often 10 kΩ.
- Pin 1 is tied to GND on 5 of 5 designs.
- Pin 2 is tied to 3.3V on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: GND 100% | — |
| Pin 2 | Connected to: 3.3V 100% | — |
| Pin 3 | Connected to: A connector 100% |
|
| Pin 4 | Connected to: A connector 100% |
|
| Pin 5 | Connected to: A connector 100% |
|
| Pin 6 | Connected to: A connector 100% |
|
| Pin 7 | Connected to: A connector 100% |
|
| Pin 13 | Connected to: A connector 100% |
|
| Pin 15 | Connected to: GND 100% | — |
| Pin 16 | Connected to: A connector 100% |
|
| Pin 17 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 18 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 19 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 20 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 21 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 22 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 23 | Connected to: A connector 100% |
|
| Pin 24 | Connected to: A connector 100% |
|
| Pin 27 | Connected to: A connector 100% |
|
| Pin 29 | Connected to: A connector 100% |
|
| Pin 32 | Connected to: Not connected 100% | — |
| Pin 34 | Connected to: A connector 80% |
|
| Pin 38 | Connected to: GND 100% | — |
| Pin 39 | Connected to: GND 100% | — |
| Pin Past | Connected to: Not connected 100% | — |
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32-PoE-ISO Rev C by OLIMEX, ESP32-DevKit-Lipo Rev B by OLIMEX, ESP32-DevKit-Lipo by rompasaurus and ESP32-PoE-ISO Rev C by fso-dev-man.
The ESP32-WROOM-32D-4MB in open source designs
The gallery holds 17 open source boards using the ESP32-WROOM-32D-4MB from 6 GitHub repositories; a typical one measures about 28 × 93 mm and carries around 116 components.
53% use four copper layers or more, and 29% carry an open source license.
The most starred is ESP32-GATEWAY Rev F by OLIMEX.
Parts used alongside the ESP32-WROOM-32D-4MB
Microcontrollers on boards using the ESP32-WROOM-32D-4MB
What boards using the ESP32-WROOM-32D-4MB are built for
ESP32-WROOM-32D-4MB: common questions
Where can I find a ESP32-WROOM-32D-4MB reference design?
Each of the 17 boards on this page is a real design using the ESP32-WROOM-32D-4MB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-WROOM-32D-4MB pin 3?
Pin 3 has a pull-up to 3.3V on 5 of 5 designs, most often 470 kΩ (then 1 MΩ). Counted from the KiCad layouts of 5 open source designs using the ESP32-WROOM-32D-4MB.
What resistor goes on the ESP32-WROOM-32D-4MB pin 34?
Pin 34 has a series resistor on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the ESP32-WROOM-32D-4MB.
How is the ESP32-WROOM-32D-4MB pin 1 connected?
Pin 1 is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-WROOM-32D-4MB.
What parts are used alongside the ESP32-WROOM-32D-4MB?
The CH340T(SSOP20W), SY8089AAAC(SOT23-5), LAN8710A-EZC(QFN32), BL4054B-42TPRN(SOT23-5) and Si3402-B-GM(QFN-20_5x5mm) appear in the most repositories here.
Which microcontrollers do boards using the ESP32-WROOM-32D-4MB use?
Most are built on ESP32 (17).
How big is a typical board using the ESP32-WROOM-32D-4MB?
The median is 28 × 93 mm, and 47% are two-layer designs.
What is the most popular open source board using the ESP32-WROOM-32D-4MB?
By GitHub stars, ESP32-GATEWAY Rev F by OLIMEX, with 320 stars.
Can I simulate one of these boards using the ESP32-WROOM-32D-4MB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.