Reflectometer
FynnK·Reflectometer·kicad/usb-instrument/usb-instrument.kicad_pcb
About the Reflectometer PCB
Reflectometer is an open source ESP32 PCB design by FynnK, published on GitHub. It is a 4-layer board measuring 100 × 100 mm, with 70 components from 35 distinct parts.
Its main chip is the XIAO-ESP32-C3-DIP, from the ESP32 family. Other key parts include the LM317_SOT-223, ISO6742, MCP2221AXSL, ADS131M02IPWR and TEA 1-0505. By type, the board carries 27 resistors, 22 capacitors, 9 ICs, 4 transistors, 4 diodes and 2 connectors.
It belongs with the test & measurement designs in this gallery.
Main components on the Reflectometer
Reflectometer bill of materials (BOM)
70 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-DIP | XIAO-ESP32-C3-DIP-SMD | U1 |
| 1 | LM317_SOT-223 | SOT-223-3_TabPin2 | U3 |
| 1 | ISO6742 | SOIC-16W_7.5x10.3mm_P1.27mm | U4 |
| 1 | MCP2221AXSL MCP2221AxSL | SOIC-14_3.9x8.7mm_P1.27mm | U5 |
| 1 | ADS131M02IPWR | TSSOP20_PW_TEX | U6 |
| 1 | TEA 1-0505 | Converter_DCDC_TRACO_TEA1-xxxx_THT | U8 |
| 1 | TLV172IDCK | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.514x3.2mm | U9 |
| 2 | LM321 | SOT-23-5 | U12, U13 |
| 3 | BS170 | SOT-23-3 | Q5, Q7, Q8 |
| 1 | BSS84 | SOT-23 | Q6 |
| 1 | XO32 | Crystal_SMD_7050-4Pin_7.0x5.0mm | Y1 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J2 |
| 1 | BPW34-SMD | Osram_BPW34S-SMD | D4 |
| 3 | LED | LED_1206_3216Metric | D5, D6, D7 |
| 1 | FerriteBead | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1 |
| 3 | 10N 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C19 |
| 1 | 47p (optional) | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 6 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C9, C10, C13, C17, C18 |
| 4 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C22, C23, C24 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C14, C16, C21 |
| 3 | 220N 220n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C20, C25 |
| 1 | 100U 100u | CP_Elec_6.3x5.7 | C15 |
| 5 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R28 |
| 2 | 5K1 5k1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 1 | 22 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 5 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R11, R12, R26, R27 |
| 1 | 18K 18k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 360 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15 |
| 2 | 4.7K 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19 |
| 4 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R30, R34, R36 |
| 3 | 47K 47k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R31, R35, R37 |
| 1 | 33 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R32 |
| 1 | 1 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R33 |
Reflectometer design files
The KiCad project lives in the FynnK/Reflectometer repository on GitHub; these links point at the commit this page was built from.
Reflectometer: common questions
What microcontroller does the Reflectometer use?
The Reflectometer is built around the XIAO-ESP32-C3-DIP, from the ESP32 family.
How big is the Reflectometer PCB?
The Reflectometer measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Reflectometer?
70 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Reflectometer design files?
From the FynnK/Reflectometer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Reflectometer design in my own project?
The repository has no license, so all rights stay with FynnK. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Reflectometer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k