5 open source boards using the TLV172IDCK
Real designs built with the TLV172IDCK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Multi vu eurorack
jjradler
41.3 × 109.5 mm130 parts2LCC0-1.01ANC
Poojaa-Rangaiah
46.1 × 58.8 mm85 parts2LNo license0ESP32
Reflectometer
FynnK
100 × 100 mm70 parts4LNo license0Driver-UI-vehicle system-ICE-Powertrain
Jsnchg
54.9 × 68 mm9 parts2LNo license0- schematic only · 86 partsRP2040/RP2350
Memristor cnn
sebishniraula
86 partsNo license0
The TLV172IDCK in open source designs
The gallery holds 5 open source boards using the TLV172IDCK from 5 GitHub repositories; a typical one measures about 50.5 × 84 mm and carries around 85 components.
75% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is Multi vu eurorack by jjradler.
Microcontrollers on boards using the TLV172IDCK
What boards using the TLV172IDCK are built for
TLV172IDCK: common questions
Where can I find a TLV172IDCK reference design?
Each of the 5 boards on this page is a real design using the TLV172IDCK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TLV172IDCK use?
Most are built on AVR/Arduino (1), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the TLV172IDCK?
The median is 50.5 × 84 mm, and 75% are two-layer designs.
What is the most popular open source board using the TLV172IDCK?
By GitHub stars, Multi vu eurorack by jjradler, with 1 stars.
Can I simulate one of these boards using the TLV172IDCK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.