PLL AM OSC 1 5a
Gloeidraad·AMFM-modulator-with-ESP32-module·V1.5/PLL_AM_OSC_1_5a.kicad_pcb
About the PLL AM OSC 1 5a PCB
PLL AM OSC 1 5a is an open source ESP32 PCB design by Gloeidraad, published on GitHub. It is a 2-layer board measuring 159.5 × 99.5 mm, with 161 components from 83 distinct parts.
Its main chip is the ESP32-WROVER-CAM, from the ESP32 family. Other key parts include the CD4053B, CD4060B, CD4046B, CD40103B and 24LC64. By type, the board carries 58 capacitors, 42 resistors, 13 ICs, 9 jumpers, 6 modules and 6 switches.
It belongs with the iot & wireless designs in this gallery.
From the project
This is an MP3 player, Web-radio player, Bluetooth player, and simple waveform generator, based on an ESP32 module. The output is connected to a simple FM/AM modulator. The player is intended for collectors and enthusiasts of old (tube) radios.
This is an MP3 player, Web-radio player, Bluetooth player, and simple waveform generator, based on an ESP32 module. The output is connected to a simple FM/AM modulator. The player is intended for collectors and enthusiasts of old (tube) radios.
The original design (V1.5) has been made with KiCad 7.0. The updated design (V1.7) has been made with KiCad 8.0.
I also added some of the specific 3D models.
Main components on the PLL AM OSC 1 5a
PLL AM OSC 1 5a bill of materials (BOM)
161 components, 83 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CD4053B | DIP-16_W7.62mm_LongPads | U1 |
| 1 | CD4060B | DIP-16_W7.62mm_LongPads | U2 |
| 1 | CD4046B | DIP-16_W7.62mm_LongPads | U3 |
| 1 | CD40103B | DIP-16_W7.62mm_LongPads | U4 |
| 1 | 24LC64 | DIP-SO-08_W7.62mm | U5 |
| 1 | PT8211 | DIP-SO-08_W7.62mm | U6 |
| 1 | 7805 | TO-220-3_Horizontal_TabDown | U7 |
| 1 | 7815 | TO-220-3_Vertical | U8 |
| 1 | CD4015B | DIP-16_W7.62mm_LongPads | U9 |
| 2 | LM358 | DIP-SO-08_W7.62mm | U10, U11 |
| 1 | KT0803L | SOIC-16_3.9x9.9mm_P1.27mm | U12 |
| 1 | TSOP4538 | Vishay_MOLD-3Pin | U13 |
| 1 | ESP32-WROVER-CAM | ESP32-WROVER-DEV_ON_HEADERS_BARE | M1 |
| 1 | µSD CARD MODULE | MOD-USD-ADAPTER18X18 | M2 |
| 1 | ELECHOUSE FM TRANSMITTER V2.0 | MOD-MOD-FM-TRANS-A-ON-HEADERS | M3 |
| 1 | OLED-27X27MM | OLED128X64-P4-Card-Edge-dual | M4 |
| 1 | Hi-Link HLK-5M15 | HiLink_5Mxx | M5 |
| 1 | CN3903 5V/3A Module | MOD-DC-DC-DUAL | M6 |
| 3 | 2N7000 | TO-92_HandSolder | Q1, Q2, Q3 |
| 1 | 9.216 MHz | Crystal_HC49-U_Vertical | X1 |
Show 63 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 32.768kHz | Crystal_AT310_D3.0mm_L10.0mm_Horizontal_1EP_style2 | X2 |
| 1 | 230V~ | EURO_AC_BX-180 | J1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 2 | Keystone 900 | Keystone RCA | J4, J5 |
| 1 | ANTENNA | ANTENNA-V3MM5 | E1 |
| 7 | SolderJumper_3_Bridged12 | SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP4, JP5, JP6, JP7, JP8, JP9 |
| 1 | LSEL | PinHeader_2x03_P2.54mm_Vertical | JP2 |
| 1 | SolderJumper_3_Bridged12 | SolderJumper-3_P1.3mm_Bridged23_RoundedPad1.0x1.5mm_NumberLabels | JP3 |
| 3 | Shield | Shielding-pad-2.5x5.0-H1.5 | SH1, SH2, SH3 |
| 1 | DOWN | SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW1 |
| 1 | UP | SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW2 |
| 1 | PAUSE/OK | SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW3 |
| 1 | MENU | SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW4 |
| 1 | SW_SPDT | SWITCH-C&K-7101 | SW5 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Bourns_Horizontal_PEC12R-2xxxF-Sxxxx | SW7 |
| 3 | TestPoint | TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1, TP2, TP3 |
| 1 | 2x7.5V/3.2VA | Transformer-Tiple-Footprint-38x45 | TR1 |
| 1 | DIL4/1A | Diode_Bridge_DIP-4_W7.62mm_P5.08mm | D1 |
| 2 | 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D2, D3 |
| 2 | BAT85 | D_DO-35_SOD27_P7.62mm_Horizontal | D4, D5 |
| 2 | 330 µH | L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal | L1, L2 |
| 2 | 180 µH | L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal | L3, L4 |
| 1 | 120nH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L5 |
| 3 | 220µF | CE_Radial_D8.0mm_P3.50mm_E2.0mm | C1, C40, C41 |
| 17 | 100n | C_CER_D50_W25_P50_E20_H08 | C2, C8, C9, C10, C11, C12, C13, C19 +9 |
| 1 | 100p | C_CER_D30_W16_P25_E20_H08 | C3 |
| 3 | 100n | C_MKT_L70_W35_P50__E20_H08 | C4, C54, C55 |
| 2 | 47p | C_CER_D30_W16_P25_E20_H08 | C5, C25 |
| 1 | 27p | C_CER_D30_W16_P25_E20_H08 | C6 |
| 1 | 470n | C_MKT_L70_W45_P50__E20_H08 | C7 |
| 1 | 2n2 | C_MKT_L70_W35_P50__E20_H08 | C14 |
| 1 | 10µF | CE_Radial_D6.3mm_P2.50mm_E2.0mm | C15 |
| 1 | 10n | C_MKT_L70_W35_P50__E20_H08 | C16 |
| 1 | 120p | GZC18100 | C17 |
| 1 | 100µF | CE_Radial_D8.0mm_P3.50mm_E2.0mm | C18 |
| 2 | 1n | C_MKT_L70_W25_P50__E20_H08 | C20, C22 |
| 2 | 470p | C_MKT_L70_W25_P50__E20_H08 | C21, C23 |
| 4 | 10n | C_CER_D30_W16_P25_E20_H08 | C24, C49, C50, C51 |
| 3 | 15p | C_CER_D30_W16_P25_E20_H08 | C26, C46, C47 |
| 4 | 22n | C_MKT_L70_W25_P50__E20_H08 | C30, C31, C32, C33 |
| 1 | 120p | TZ03 | C34 |
| 1 | 142+59 pF | CAP-VAR-223P-NO-CY | C35 |
| 1 | 1000µF | CP_Radial_D13.0mm_P5.00mm | C42 |
| 1 | 2200µF | CP_Radial_D13.0mm_P5.00mm | C43 |
| 2 | 4n7/Y1 | C_Disc_D10.5mm_W5.0mm_P10.00mm | C44, C45 |
| 1 | 10u | CE_Radial_D6.3mm_P2.50mm_E2.0mm | C53 |
| 1 | 4p7 | C_CER_D30_W16_P25_E20_H08 | C58 |
| 2 | 220p | C_CER_D30_W16_P25_E20_H08 | C59, C60 |
| 14 | 10k | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R7, R8, R27 +6 |
| 2 | 100K | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R6, R23 |
| 2 | 10R | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R10, R46 |
| 6 | 7k5 | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R12, R13, R14, R15, R35, R36 |
| 4 | 30k | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R16, R17, R18, R31 |
| 1 | 220K | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R19 |
| 2 | 1M | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R20, R21 |
| 1 | 2K2 | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R22 |
| 1 | 3K3 | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R24 |
| 1 | 2M2 | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R25 |
| 1 | 5K6 | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R26 |
| 3 | 220R | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R28, R29, R40 |
| 1 | 8k2 | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R32 |
| 2 | 4K7 | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R33, R34 |
| 1 | 15k | R_Axial_L6.0mm_D2.0mm_P10.16mm_Horizontal | R37 |
PLL AM OSC 1 5a design files
The KiCad project lives in the Gloeidraad/AMFM-modulator-with-ESP32-module repository on GitHub; these links point at the commit this page was built from.
- LayoutV1.5/PLL_AM_OSC_1_5a.kicad_pcb
- SchematicV1.5/PLL_AM_OSC_1_5a.kicad_sch
PLL AM OSC 1 5a: common questions
What microcontroller does the PLL AM OSC 1 5a use?
The PLL AM OSC 1 5a is built around the ESP32-WROVER-CAM, from the ESP32 family.
How big is the PLL AM OSC 1 5a PCB?
The PLL AM OSC 1 5a measures 159.5 × 99.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PLL AM OSC 1 5a?
161 components, from 83 distinct parts. The full bill of materials is listed on this page.
Where can I download the PLL AM OSC 1 5a design files?
From the Gloeidraad/AMFM-modulator-with-ESP32-module repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PLL AM OSC 1 5a design in my own project?
The repository has no license, so all rights stay with Gloeidraad. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PLL AM OSC 1 5a without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in AMFM-modulator-with-ESP32-module
ESP32
PLL AM OSC 1 7
Gloeidraad
160 × 100 mm168 parts2LNo license0PlayerFront02
Gloeidraad
165 × 51.5 mm14 parts2LNo license0PLL AM OSC 1 5 ASSY
Gloeidraad
30 × 30 mm5 parts2LNo license0PLL AM OSC 1 7 ASSY
Gloeidraad
30 × 30 mm5 parts2LNo license0PlayerFront01
Gloeidraad
165 × 51.5 mm4 parts2LNo license0PlayerBack02
Gloeidraad
165 × 51.5 mm4 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k