VFDClock
GraniteGobbler·VFDClock·pcb/VFDClock.kicad_pcb
About the VFDClock PCB
VFDClock is an open source ESP32 PCB design by GraniteGobbler, published on GitHub. It is a 4-layer board measuring 80 × 52.7 mm, with 81 components from 42 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TBD62783AFWG, IP4234CZ6, TBD62783AFNG, SN74HC595PWR and AMS1117-3.3. By type, the board carries 20 capacitors, 20 resistors, 10 ICs, 9 connectors, 9 diodes and 6 switches.
From the project
ESP32-S3 -based IV-22 desk clock

Main components on the VFDClock
VFDClock bill of materials (BOM)
81 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TBD62783AFWG | SSOP-18_4.4x6.5mm_P0.65mm | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 1 | IP4234CZ6 | SC-74-6_1.55x2.9mm_P0.95mm | U3 |
| 1 | TBD62783AFNG | SSOP-18_4.4x6.5mm_P0.65mm | U4 |
| 1 | SN74HC595PWR | TSSOP-16_4.4x5mm_P0.65mm | U5 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U6 |
| 1 | DS3231MZ+TRL | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | SHT45-AD1B-R2 | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U8 |
| 1 | VEML3235SL | VEML3235SL_Horizontal | U9 |
| 1 | AMS1117-1.5 | SOT-223-3_TabPin2 | U10 |
| 1 | CONN_01X04_SOCKET Conn_01x04_Socket | PinSocket_2x02_P2.54mm_Vertical_SMD | J1 |
| 1 | R_SIG_CONN | PinHeader_2x03_P2.54mm_Horizontal | J2 |
| 1 | R_PWR_CONN | PinHeader_2x03_P2.54mm_Horizontal | J3 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | CUI_UJ20-C-V-C-2-SMT-TR | J4 |
| 1 | L_SIG_CONN | PinHeader_2x03_P2.54mm_Horizontal | J5 |
| 1 | L_PWR_CONN | PinHeader_2x03_P2.54mm_Horizontal | J6 |
| 1 | CONN_GPIO | PinSocket_2x04_P2.54mm_Vertical_SMD | J7 |
| 1 | L_COL_CONN | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | R_COL_CONN | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J9 |
| 1 | CR2032 | BatteryHolder_Keystone_3034_1x20mm | BT1 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2,5 A Fast Blow | Fuse_0603_1608Metric | F1 |
| 1 | RS3K-0524S_H3 | CONV_RS3K-0524S_H3 | PS1 |
| 1 | 10 | Potentiometer_Bourns_3339P_Vertical | RV1 |
| 2 | SW_SPST | SW_SPST_PTS810 | SW1, SW2 |
| 4 | SW_SPST | SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW3, SW4, SW5, SW6 |
| 2 | IV-22 | PinSocket_1x12_P2.54mm_Vertical | VFD1, VFD2 |
| 2 | XGD10603MR | D_0603_1608Metric | D1, D2 |
| 5 | 1PS70SB84 | SOT-323_SC-70 | D3, D6, D7, D8, D9 |
| 1 | Power LED | LED_0603_1608Metric | D4 |
| 1 | MCU LED | LED_0603_1608Metric | D5 |
| 1 | 5.6U 5.6u | L_1812_4532Metric | L1 |
| 5 | 10U 10u | CP_EIA-3216-18_Kemet-A | C1, C6, C13, C15, C18 |
| 10 | 100N 100n | C_0805_2012Metric | C2, C4, C5, C8, C10, C11, C14, C16 +2 |
| 2 | 1u | C_0805_2012Metric | C3, C12 |
| 2 | 22U 22u | CP_EIA-3216-18_Kemet-A | C7, C19 |
| 1 | 1n | C_0805_2012Metric | C9 |
| 6 | 4K7 4k7 | R_0805_2012Metric | R1, R2, R3, R4, R5, R6 |
| 2 | 100K 100k | R_0805_2012Metric | R7, R8 |
| 2 | 5K1 5k1 | R_0805_2012Metric | R9, R10 |
| 7 | 10K 10k | R_0805_2012Metric | R11, R12, R13, R14, R18, R19, R20 |
| 2 | 180 | R_0805_2012Metric | R15, R16 |
| 1 | R_Photo | R_LDR_5.1x4.3mm_P3.4mm_Vertical | R17 |
VFDClock design files
The KiCad project lives in the GraniteGobbler/VFDClock repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/VFDClock.kicad_pcb
- Schematicpcb/VFDClock.kicad_sch
- BOMpcb/production/bom.csv
VFDClock: common questions
What microcontroller does the VFDClock use?
The VFDClock is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the VFDClock PCB?
The VFDClock measures 80 × 52.7 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the VFDClock?
81 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the VFDClock design files?
From the GraniteGobbler/VFDClock repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the VFDClock design in my own project?
The repository has no license, so all rights stay with GraniteGobbler. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the VFDClock without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in VFDClock
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k