8 open source boards using the SN74HC595PWR
Real designs built with the SN74HC595PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Ephys test board
open-ephys
150 × 120 mm542 parts4LCustom license1Pixel-Badge
zgeez
118 × 76 mm1202 parts4LMIT0ESP32
Dmmx16
MoominByte
220 × 110 mm113 parts4LNo license0ESP32
Nescart
Keitark
99.7 × 63.9 mm84 parts6LMIT0ESP32
VFDClock
GraniteGobbler
80 × 52.7 mm81 parts4LNo license0ESP32
Nescart fc Rev A-FC
Keitark
90 × 66.8 mm80 parts6LMIT0Module
GraniteGobbler
44.4 × 52.7 mm25 parts2LNo license0ESP32
ARDF-TX UNIVERSAL CONTROLLER
DD1SB
100 × 100 mm197 parts2LMIT0
How designs wire the SN74HC595PWR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SN74HC595PWR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_16 pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF.
- The SRCLR_10 pin has a capacitor to GND on 3 of 6 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| QB_1pin 1 | Connected to: Signal 100% |
|
| QC_2pin 2 | Connected to: Signal 100% |
|
| QD_3pin 3 | Connected to: Signal 100% |
|
| QE_4pin 4 | Connected to: Signal 100% |
|
| QF_5pin 5 | Connected to: Signal 100% |
|
| QG_6pin 6 | Connected to: Signal 100% |
|
| QH_7pin 7 | Connected to: Signal 100% |
|
| GND_8pin 8 | Connected to: GND 100% | — |
| SRCLR_10pin 10 | Connected to: SN74HC595PWR 50%, the microcontroller 33% · 3.3V 33% |
|
| OE_13pin 13 | Connected to: GND 50% · a signal 50% |
|
| QA_15pin 15 | Connected to: Signal 100% |
|
| VCC_16pin 16 | Connected to: 3.3V 67% · a signal 33% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ephys test board by open-ephys, ARDF-TX UNIVERSAL CONTROLLER by DD1SB, VFDClock by GraniteGobbler and Nescart by Keitark.
The SN74HC595PWR in open source designs
The gallery holds 8 open source boards using the SN74HC595PWR from 6 GitHub repositories; a typical one measures about 99.8 × 71.4 mm and carries around 99 components.
75% use four copper layers or more, and 50% carry an open source license.
The most starred is Ephys test board by open-ephys.
Parts used alongside the SN74HC595PWR
Microcontrollers on boards using the SN74HC595PWR
What boards using the SN74HC595PWR are built for
SN74HC595PWR: common questions
Where can I find a SN74HC595PWR reference design?
Each of the 8 boards on this page is a real design using the SN74HC595PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74HC595PWR VCC_16 pin?
The VCC_16 pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the SN74HC595PWR.
How is the SN74HC595PWR SRCLR_10 pin connected?
The SRCLR_10 pin has a capacitor to GND on 3 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the SN74HC595PWR.
Which microcontrollers do boards using the SN74HC595PWR use?
Most are built on ESP32 (5) and RP2040/RP2350 (1).
How big is a typical board using the SN74HC595PWR?
The median is 99.8 × 71.4 mm, and 25% are two-layer designs.
What is the most popular open source board using the SN74HC595PWR?
By GitHub stars, Ephys test board by open-ephys, with 1 stars.
Can I simulate one of these boards using the SN74HC595PWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.